In this review, we will be comparing KC92 and Performa3 B112v2, two Powered Subwoofer speakers from KEF and Revel. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of KEF KC92 and Revel Performa3 B112v2 first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.KEF KC92 and Revel Performa3 B112v2 have a totally different setup: the KEF KC92 features 2 x 9-inch drivers whereas the Performa3 B112v2 features 1 x 12-inch drivers.
Frequency Response
KC92 has a frequency range of 11-200 Hz whereas Performa3 B112v2 has a frequency range of 29-150 Hz. With a minimum frequency of 11Hz, the KC92 can go significantly deeper on the low side and provide stronger bass compared to the Performa3 B112v2's min frequency of 29Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
Both KEF KC92 and Revel Performa3 B112v2 have Acoustic Suspension type cabinets. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare KEF KC92's and Revel Performa3 B112v2's external dimensions. KEF KC92 has external dimensions of 352.5 x 330 x 360.5 mm (13.88 x 13.00 x 14.19 in) whereas Revel Performa3 B112v2 has external dimensions of 469.0 x 405.0 x 472.0mm (18-7/16inch x 15-15/16inch x 18-9/16inch).
Revel Performa3 B112v2 is clearly the larger of the two speakers. Its body is 75mm wider, 117mm taller and 111mm deeper than KEF KC92.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the KEF KC92 is approximately 1191.3cm2 / 184.7inch2 and base area of the Revel Performa3 B112v2 is approximately 1911.6cm2 / 296.3inch2. The KC92 requires 38% less surface area than the Performa3 B112v2 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The KEF KC92 weighs 20.00kg / 44lbs and the Revel Performa3 B112v2 weighs 29.45kg / 64.8lbs. This makes the Performa3 B112v2 47% heavier than the KC92.
Here is a comparison of how KC92 and Performa3 B112v2's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of KEF KC92?
Here are the items that are included inside the box of KC92:
- KC92 subwoofer
- Power cord
- Euroblock speaker level connector
- User manual and warranty information
What's in the Box of Revel Performa3 B112v2?
Here are the items that come with the Performa3 B112v2:
- Powered subwoofer
- 6-feet AC power cord
- Grille
- 4 Spike feet
- Owners Manual
 Number of Woofers |
2
vs
1
|
More woofers |
| Low Frequency Response |
11 Hz
vs
29 Hz
|
Generates deeper bass |
 High Frequency Response |
200 Hz
vs
150 Hz
|
Generates higher frequency |
 Height |
352mm
vs
469mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1191cm2
vs
1911cm2
|
Takes less floor space |
 Price per pair* |
1999USD
vs
2695USD
|
costs less (*prices may change depending on the seller, location and time) |
 Wireless Operation |
Optional
vs
No
|
Connect your subwoofer to your system wireless |
| Woofer Size |
12 inches
vs
9 inches
|
Larger woofer |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
Revel Performa3 B112v2 needs about 60% more floor area. Revel Performa3 B112v2 stands 111mm further into the room. Revel Performa3 B112v2 is 117mm taller.
| General |
KEF KC92 |
Revel Performa3 B112v2 |
| Brand |
KEF |
Revel |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
1000 watts |
1000 watts |
| Frequency Response |
11-200 Hz |
29-150 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
1000-watt RMS |
1000-watt RMS |
Drivers |
|
|
| Woofer Quantity |
2 |
1 |
| Woofer Size |
9" |
12" |
| Woofer Composition |
Polypropylene |
Coated Paper/Pulp |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
40-140 Hz |
n/a |
| Firing Direction |
n/a |
front |
Physical Specs |
|
|
| Height |
352.0mm (13.9") |
469.0mm (18.5") |
| Width |
330.0mm (13") |
405.0mm (15.9") |
| Depth |
361.0mm (14.2") |
472.0mm (18.6") |
| Weight |
20.00kg (44lbs) |
29.45kg (64.8lbs) |
| Enclosure |
Acoustic Suspension |
Acoustic Suspension |
| Grille |
n/a |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
2 Years |
5 Years |
| Labor Warranty |
2 Years |
5 Years |
No single best subwoofer here. Your room, where the box can physically go, and whether this is mainly for films or mainly for music will settle it long before the specs do.
| Area | Better | Why |
|---|
| Bass depth | A | KEF KC92 goes deeper - 11Hz against 29Hz. Under 20Hz is felt more than heard - the bottom of a pipe organ and the bottom of a film mix. |
| Amplifier power | evenly matched | Much the same amplifier (1000W vs 1000W RMS) - under 1dB apart. |
| Driver area | evenly matched | Near-identical radiating area (2 x 9" against 12"). |
| Enclosure | evenly matched | Both are sealed designs, so they roll off in much the same way. |
| Speaker-level inputs | A | KEF KC92 takes a speaker-level connection as well as line level. That is what lets it work with an integrated amplifier or a vintage receiver that has no subwoofer output at all. |
| Wireless option | depends | Only KEF KC92 offers a wireless link (as a paid option). It decides where the sub can go if you cannot run a cable, and is worth nothing if you can. |
| Cabinet size | depends | KEF KC92 is about 53% smaller by volume. In a subwoofer that is a real trade rather than a preference: box volume is how you get output low down without a bigger amplifier. |
| Warranty | B | Revel Performa3 B112v2 carries 5 years on parts against 2 years. A subwoofer amplifier works harder than anything else in the system, so this is not a throwaway line. |
| Price | A | KEF KC92 costs less - $1,999 against $2,695, about 26% less. |
A KEF KC92 B Revel Performa3 B112v2
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
KEF KC92 has the edge on paper, though not by much. The "depends" rows are more likely to decide this than the score is. Check your amplifier first: if it has no subwoofer or preamp output, KEF KC92 is the only one of these two you can connect at all. If placement is the constraint - a corner, behind a sofa, under a desk - KEF KC92 is the one that will actually go there, and a well-placed small subwoofer beats a badly-placed big one every time.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.