In this review, we will be comparing KC92 and Sub 6, two Powered Subwoofer speakers from KEF and Dynaudio. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of KEF KC92 and Dynaudio Sub 6 first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.KEF KC92 and Dynaudio Sub 6 have a totally different setup: the KEF KC92 features 2 x 9-inch drivers whereas the Sub 6 features 1 x 9.5-inch drivers.
Frequency Response
KC92 has a frequency range of 11-200 Hz whereas Sub 6 has a frequency range of 16-230 Hz. With a minimum frequency of 11Hz, the KC92 can go significantly deeper on the low side and provide stronger bass compared to the Sub 6's min frequency of 16Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
Both KEF KC92 and Dynaudio Sub 6 have Acoustic Suspension type cabinets. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare KEF KC92's and Dynaudio Sub 6's external dimensions. KEF KC92 has external dimensions of 352.5 x 330 x 360.5 mm (13.88 x 13.00 x 14.19 in) whereas Dynaudio Sub 6 has external dimensions of 334.0 x 477.0 x 312.0mm (13-1/8 x 18-3/4 x 12-1/4inch).
Dynaudio Sub 6 is 18mm shorter and 49mm less deeper than KEF KC92 but it is also 147mm wider.
Size, drawn to scale
Both speakers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same surface and pushed back to the same wall, so the deeper one visibly sticks out further.
Dynaudio Sub 6 needs about 25% more floor or shelf area. KEF KC92 is 49mm deeper, so it stands that much further out from the wall. KEF KC92 is 18mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the KEF KC92 is approximately 1191.3cm2 / 184.7inch2 and base area of the Dynaudio Sub 6 is approximately 1488.2cm2 / 230.7inch2. The KC92 requires 20% less surface area than the Sub 6 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The KEF KC92 weighs 20.00kg / 44lbs and the Dynaudio Sub 6 weighs 20.55kg / 45.2lbs. This makes the Sub 6 3% heavier than the KC92.
Here is a comparison of how KC92 and Sub 6's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of KEF KC92?
Here are the items that are included inside the box of KC92:
- KC92 subwoofer
- Power cord
- Euroblock speaker level connector
- User manual and warranty information
What's in the Box of Dynaudio Sub 6?
Here are the items that come with the Sub 6:
- Powered subwoofer
- 2 Grilles
- 6-feet AC power cord
- 4 Rubber feet (pre-installed)
- 4 Spike feet
- 4 Hex-nuts
- 4 Protective discs
- Wrench
- Owners Manual
- Quick Start Guide
- Warranty Extension Card
- Warning note
 Number of Woofers |
2
vs
1
|
More woofers |
| Low Frequency Response |
11 Hz
vs
16 Hz
|
Generates deeper bass |
 Base Surface Area |
1191cm2
vs
1488cm2
|
Takes less floor space |
 Price per pair* |
1999USD
vs
2399USD
|
costs less (*prices may change depending on the seller, location and time) |
 Wireless Operation |
Optional
vs
No
|
Connect your subwoofer to your system wireless |
| Woofer Size |
9.5 inches
vs
9 inches
|
Larger woofer |
 High Frequency Response |
230 Hz
vs
200 Hz
|
Generates higher frequency |
 Height |
334mm
vs
352mm
|
Easier to fit in smaller spaces |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
Dynaudio Sub 6 needs about 25% more floor area. KEF KC92 stands 49mm further into the room. KEF KC92 is 18mm taller.
| General |
KEF KC92 |
Dynaudio Sub 6 |
| Brand |
KEF |
Dynaudio |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
1000 watts |
500 watts |
| Frequency Response |
11-200 Hz |
16-230 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
1000-watt RMS |
500-watt RMS |
Drivers |
|
|
| Woofer Quantity |
2 |
1 |
| Woofer Size |
9" |
9.5" |
| Woofer Composition |
Polypropylene |
Magnesium Silicate Polymer |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
40-140 Hz |
n/a |
| Firing Direction |
n/a |
side |
Physical Specs |
|
|
| Height |
352.0mm (13.9") |
334.0mm (13.1") |
| Width |
330.0mm (13") |
477.0mm (18.8") |
| Depth |
361.0mm (14.2") |
312.0mm (12.3") |
| Weight |
20.00kg (44lbs) |
20.55kg (45.2lbs) |
| Enclosure |
Acoustic Suspension |
Acoustic Suspension |
| Grille |
n/a |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
2 Years |
3 Years |
| Labor Warranty |
2 Years |
3 Years |
Two quite different sizes of subwoofer. Room volume decides this more than anything else on the page: a big driver in a small room is wasted, and a small one in a large room is worked to death.
| Area | Better | Why |
|---|
| Bass depth | A | KEF KC92 goes deeper - 11Hz against 16Hz. Under 20Hz is felt more than heard - the bottom of a pipe organ and the bottom of a film mix. |
| Amplifier power | A | KEF KC92 has the bigger amplifier - 1000W against 500W RMS, about 3dB more on tap. In a large room that is headroom before the DSP starts limiting. |
| Driver area | A | KEF KC92 moves more air: 2 x 9" against 9.5" is 1.8x the cone area, not the 1.34x the diameters suggest. More area means the same output with less excursion, and less distortion with it. |
| Enclosure | evenly matched | Both are sealed designs, so they roll off in much the same way. |
| Speaker-level inputs | A | KEF KC92 takes a speaker-level connection as well as line level. That is what lets it work with an integrated amplifier or a vintage receiver that has no subwoofer output at all. |
| Wireless option | depends | Only KEF KC92 offers a wireless link (as a paid option). It decides where the sub can go if you cannot run a cable, and is worth nothing if you can. |
| Warranty | B | Dynaudio Sub 6 carries 3 years on parts against 2 years. A subwoofer amplifier works harder than anything else in the system, so this is not a throwaway line. |
| Price | A | KEF KC92 costs less - $1,999 against $2,399, about 17% less. |
A KEF KC92 B Dynaudio Sub 6
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
KEF KC92 is the easier recommendation: it leads on most of the measured areas and costs less. Take Dynaudio Sub 6 if one of the "depends" rows describes your room. Check your amplifier first: if it has no subwoofer or preamp output, KEF KC92 is the only one of these two you can connect at all.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.