In this review, we will be comparing KC62 and Bronze W10, two Powered Subwoofer speakers from KEF and Monitor Audio . Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of KEF KC62 and Monitor Audio Bronze W10 first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the KEF KC62 and Monitor Audio Bronze W10 compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.KEF KC62 and Monitor Audio Bronze W10 have a totally different setup: the KEF KC62 features 2 x 6.5-inch drivers whereas the Bronze W10 features 1 x 10-inch drivers.
Frequency Response
KC62 has a frequency range of 11-200 Hz whereas Bronze W10 has a frequency range of 29-150 Hz. With a minimum frequency of 11Hz, the KC62 can go significantly deeper on the low side and provide stronger bass compared to the Bronze W10's min frequency of 29Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The KEF KC62 has a Acoustic Suspension type cabinet. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs. On the other hand the Monitor Audio Bronze W10 have Passive Radiator type enclosure. Passive Radiator type subwoofers sports a non-powered cone that moves in response to the main woofer to move air out in order to generate stronger bass in a smaller body compared to ported or sealed designs.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare KEF KC62's and Monitor Audio Bronze W10's external dimensions. KEF KC62 has external dimensions of 245.0 x 258.0 x 281.0mm ( 9-5/8inch x 10-1/8inch x 11-1/16inch ) whereas Monitor Audio Bronze W10 has external dimensions of 361.0 x 321.0 x 405.0mm ( 14-3/16 x 12-5/8 x 15-15/16inch) .
Monitor Audio Bronze W10 is clearly the larger of the two speakers. Its body is 63mm wider, 116mm taller and 124mm deeper than KEF KC62.
Below you can see the front view size comparison of KEF KC62 and Monitor Audio Bronze W10 in scale.
Comparison image of KEF KC62 and Monitor Audio Bronze W10 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the KEF KC62 is approximately 725.0cm2 / 112.4inch2 and base area of the Monitor Audio Bronze W10 is approximately 1300.1cm2 / 201.5inch2. The KC62 requires 44% less surface area than the Bronze W10 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The KEF KC62 weighs 14.05kg / 30.9lbs and the Monitor Audio Bronze W10 weighs 13.44kg / 29.6lbs. This makes the KC62 5% heavier than the Bronze W10.
Here is a comparison of how KC62 and Bronze W10's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of KEF KC62?
Here are the items that are included inside the box of KC62:
Powered subwoofer6.5-feet AC power cordSpeaker-level input blockUser ManualImportant Safety InformationWarranty Information
What's in the Box of Monitor Audio Bronze W10?
Here are the items that come with the Bronze W10:
Powered subwooferGrille6.5-feet AC power cord10-feet Mono-minijack cable4 Rubber feetQuick Start GuideImportant Safety Instructions
 Number of Woofers |
2
vs
1
|
More woofers |
| Low Frequency Response |
11 Hz
vs
29 Hz
|
Generates deeper bass |
 High Frequency Response |
200k Hz
vs
150k Hz
|
Generates higher frequency |
 Height |
245mm
vs
361mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
725cm2 (258x281mm)
vs
1300cm2 (321x405mm)
|
Takes less floor space |
 Wireless Operation |
Optional
vs
No
|
Connect your subwoofer to your system wireless |
| Woofer Size |
10 inches
vs
6.5 inches
|
Larger woofer |
 Price per pair* |
975USD
vs
1500USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
KEF KC62 |
Monitor Audio Bronze W10 |
| Brand |
KEF |
Monitor Audio |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
1000 watts |
220 watts |
| Frequency Response |
11-200 Hz |
29-150 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
1000-watt RMS |
220-watt RMS |
Drivers |
|
|
| Woofer Quantity |
2 |
1 |
| Woofer Size |
6.5" |
10" |
| Woofer Composition |
|
C-CAM |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
side |
front |
Physical Specs |
|
|
| Height |
245.0mm (9.6") |
361.0mm (14.2") |
| Width |
258.0mm (10.2") |
321.0mm (12.6") |
| Depth |
281.0mm (11.1") |
405.0mm (15.9") |
| Weight |
14.05kg (30.9lbs) |
13.44kg (29.6lbs) |
| Enclosure |
Acoustic Suspension |
Passive Radiator |
| Grille |
n/a |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
2 Years |
5 Years |
| Labor Warranty |
2 Years |
5 Years |