In this review, we will be comparing ForceField 4 and ASW608, two Powered Subwoofer speakers from GoldenEar and Bowers Wilkins. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of GoldenEar ForceField 4 and B&W ASW608 first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking through our links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both GoldenEar ForceField 4and B&W ASW608 have a single woofer setup however the GoldenEar ForceField 4's woofer is 10-inch whereas the B&W ASW608 features a 8-inch woofer.
Frequency Response
ForceField 4 has a frequency range of 14-250 Hz whereas ASW608 has a frequency range of 32-140 Hz. With a minimum frequency of 14Hz, the ForceField 4 can go significantly deeper on the low side and provide stronger bass compared to the ASW608's min frequency of 32Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The GoldenEar ForceField 4 has a Passive Radiator type cabinet. Passive Radiator type subwoofers sports a non-powered cone that moves in response to the main woofer to move air out in order to generate stronger bass in a smaller body compared to ported or sealed designs. On the other hand the B&W ASW608 have Acoustic Suspension type enclosure. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare GoldenEar ForceField 4's and B&W ASW608's external dimensions. GoldenEar ForceField 4 has external dimensions of 331.0 x 340.0 x 482.0mm (13inch x 13-3/8inch x 18-15/16inch) whereas B&W ASW608 has external dimensions of 272.0 x 261.0 x 350.0mm (10-11/16 x 10-1/4 x 13-3/4inch).
GoldenEar ForceField 4 is clearly the larger of the two speakers. Its body is 79mm wider, 59mm taller and 132mm deeper than B&W ASW608.
Below you can see the front view size comparison of GoldenEar ForceField 4 and B&W ASW608 in scale.
Comparison image of GoldenEar ForceField 4 and B&W ASW608 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the GoldenEar ForceField 4 is approximately 1638.8cm2 / 254.0inch2 and base area of the B&W ASW608 is approximately 913.5cm2 / 141.6inch2. The ForceField 4 requires 79% more surface area than the ASW608 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The GoldenEar ForceField 4 weighs 14.55kg / 32lbs and the B&W ASW608 weighs 8.86kg / 19.5lbs. This makes the ForceField 4 64% heavier than the ASW608.
Here is a comparison of how ForceField 4 and ASW608's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of GoldenEar ForceField 4?
Here are the items that are included inside the box of ForceField 4:
- Powered Subwoofer
- 10-feet AC power cord
- Owners Manual
What's in the Box of B&W ASW608?
Here are the items that come with the ASW608:
- Powered subwoofer
- Grille
- 6.5-feet AC power cord
- 4 Rubber feet
- 4 Spike feet
- 4 Lock-nuts
- Manual
- Bowers & Wilkins brochure
- Warranty Information
 Woofer Size |
10 inches
vs
8 inches
|
Larger woofer |
| Low Frequency Response |
14 Hz
vs
32 Hz
|
Generates deeper bass |
 High Frequency Response |
250k Hz
vs
140k Hz
|
Generates higher frequency |
 Height |
272mm
vs
331mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
913cm2
vs
1638cm2
|
Takes less floor space |
 Price per pair* |
599USD
vs
799USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
GoldenEar ForceField 4 |
Bowers & Wilkins ASW608 |
| Brand |
GoldenEar |
Bowers Wilkins |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
1200 watts |
200 watts |
| Frequency Response |
14-250 Hz |
32-140 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
1200-watt RMS |
200-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
10" |
8" |
| Woofer Composition |
Polypropylene |
Paper/Aramid Fiber |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
331.0mm (13") |
272.0mm (10.7") |
| Width |
340.0mm (13.4") |
261.0mm (10.3") |
| Depth |
482.0mm (19") |
350.0mm (13.8") |
| Weight |
14.55kg (32lbs) |
8.86kg (19.5lbs) |
| Enclosure |
Passive Radiator |
Acoustic Suspension |
| Grille |
n/a |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
3 Years |
2 Years |
| Labor Warranty |
3 Years |
2 Years |