In this review, we will be comparing Varro RS500-SB and SPL-120, two Powered Subwoofer speakers from ELAC and Klipsch. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of ELAC Varro RS500-SB and Klipsch SPL-120 first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both ELAC Varro RS500-SBand Klipsch SPL-120 have a single woofer setup however the ELAC Varro RS500-SB's woofer is 10-inch whereas the Klipsch SPL-120 features a 12-inch woofer.
Frequency Response
Varro RS500-SB has a frequency range of 18-150 Hz whereas SPL-120 has a frequency range of 24-125 Hz. With a minimum frequency of 18Hz, the Varro RS500-SB can go significantly deeper on the low side and provide stronger bass compared to the SPL-120's min frequency of 24Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The ELAC Varro RS500-SB has a Acoustic Suspension type cabinet. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs. On the other hand the Klipsch SPL-120 have Bass Reflex type enclosure. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare ELAC Varro RS500-SB's and Klipsch SPL-120's external dimensions. ELAC Varro RS500-SB has external dimensions of 381.0 x 361.0 x 388.0mm (15inch x 14-3/16inch x 15-1/4inch) whereas Klipsch SPL-120 has external dimensions of 450.0 x 375.0 x 540.0mm (17-11/16 x 14-3/4 x 21-1/4inch).
Klipsch SPL-120 is clearly the larger of the two speakers. Its body is 14mm wider, 69mm taller and 152mm deeper than ELAC Varro RS500-SB.
Below you can see the front view size comparison of ELAC Varro RS500-SB and Klipsch SPL-120 in scale.
Comparison image of ELAC Varro RS500-SB and Klipsch SPL-120 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the ELAC Varro RS500-SB is approximately 1400.7cm2 / 217.1inch2 and base area of the Klipsch SPL-120 is approximately 2025.0cm2 / 313.9inch2. The Varro RS500-SB requires 31% less surface area than the SPL-120 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The ELAC Varro RS500-SB weighs 20.85kg / 45.9lbs and the Klipsch SPL-120 weighs 20.45kg / 45lbs. This makes the Varro RS500-SB 2% heavier than the SPL-120.
Here is a comparison of how Varro RS500-SB and SPL-120's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of ELAC Varro RS500-SB?
Here are the items that are included inside the box of Varro RS500-SB:
- Grill
- Power Cord
- 4 Spikes
What's in the Box of Klipsch SPL-120?
Here are the items that come with the SPL-120:
- Powered sub
- Grille
- 6.5-feet AC power cord
- User Manual
- Important Safety Instructions
- Warranty Information
 Low Frequency Response |
18 Hz
vs
24 Hz
|
Generates deeper bass |
 High Frequency Response |
150 Hz
vs
125 Hz
|
Generates higher frequency |
 App-Based Control |
iOS,Android
vs
None
|
Control the speaker via an app |
 Height |
381mm
vs
450mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1400cm2
vs
2025cm2
|
Takes less floor space |
 Ethernet Connection |
Yes
vs
No
|
High quality streaming over Ethernet |
| Woofer Size |
12 inches
vs
10 inches
|
Larger woofer |
 Price per pair* |
499USD
vs
1299USD
|
costs less (*prices may change depending on the seller, location and time) |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
Klipsch SPL-120 needs about 45% more floor area. Klipsch SPL-120 stands 152mm further into the room. Klipsch SPL-120 is 69mm taller.
| General |
ELAC Varro RS500-SB |
Klipsch SPL-120 |
| Brand |
ELAC |
Klipsch |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
500 watts |
300 watts |
| Frequency Response |
18-150 Hz |
24-125 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
500-watt RMS |
300-watt RMS |
| Watts Peak (Max) |
1000-watt RMS |
600-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
10" |
12" |
| Woofer Composition |
Aluminum |
Cerametallic |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
bottom |
front |
Physical Specs |
|
|
| Height |
381.0mm (15") |
450.0mm (17.7") |
| Width |
361.0mm (14.2") |
375.0mm (14.8") |
| Depth |
388.0mm (15.3") |
540.0mm (21.3") |
| Weight |
20.85kg (45.9lbs) |
20.45kg (45lbs) |
| Enclosure |
Acoustic Suspension |
Bass Reflex |
| Finish |
MDF |
n/a |
| Available Colors |
Gloss Black |
n/a |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| USB Port |
USB-A port for firmware updates |
n/a |
| Ethernet Port |
Yes |
n/a |
Other |
|
|
| Parts Warranty |
1 year |
2 Years |
| Labor Warranty |
1 year |
2 Years |
A sealed subwoofer against a ported one. That is the most consequential line on this page: it decides how the bass rolls off, how it behaves in a small room, and how much output you get for the size of the box.
| Area | Better | Why |
|---|
| Bass depth | A | ELAC Varro RS500-SB goes deeper - 18Hz against 24Hz. Under 20Hz is felt more than heard - the bottom of a pipe organ and the bottom of a film mix. |
| Amplifier power | A | ELAC Varro RS500-SB has the bigger amplifier - 500W against 300W RMS, about 2.2dB more on tap. In a large room that is headroom before the DSP starts limiting. |
| Driver area | B | Klipsch SPL-120 moves more air: 12" against 10" is 1.44x the cone area, not the 1.2x the diameters suggest. More area means the same output with less excursion, and less distortion with it. |
| Enclosure | depends | ELAC Varro RS500-SB is sealed - a sealed box rolls off gently and is usually the easier one to integrate in a small or awkward room; Klipsch SPL-120 is ported - a ported box gives more output low down for its size, at the cost of a steeper roll-off below tuning. Neither is better in the abstract; ported tends to suit films and sealed tends to suit music, and both generalisations have exceptions. |
| Speaker-level inputs | A | ELAC Varro RS500-SB takes a speaker-level connection as well as line level. That is what lets it work with an integrated amplifier or a vintage receiver that has no subwoofer output at all. |
| Driver placement | depends | ELAC Varro RS500-SB fires down and Klipsch SPL-120 fires front. A down-firing driver is more forgiving of a grille-less look and of a hard floor; a front-firing one is the safer choice on a thick carpet or a suspended timber floor. |
| Cabinet size | depends | ELAC Varro RS500-SB is about 41% smaller by volume. In a subwoofer that is a real trade rather than a preference: box volume is how you get output low down without a bigger amplifier. |
| Warranty | B | Klipsch SPL-120 carries 2 years on parts against 1 years. A subwoofer amplifier works harder than anything else in the system, so this is not a throwaway line. |
| Price | B | Klipsch SPL-120 costs less - $499 against $1,299, about 62% less. |
A ELAC Varro RS500-SB B Klipsch SPL-120
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
ELAC Varro RS500-SB is ahead, but on only 1 of the measured areas, and it costs about 2.6x the price. Klipsch SPL-120 is the sensible buy unless your room is large enough to need the extra. Films or music? If this is mainly a home cinema, Klipsch SPL-120 will hit harder for the money; if it is mainly for music in a normal-sized room, ELAC Varro RS500-SB is usually the easier one to make sound right. Check your amplifier first: if it has no subwoofer or preamp output, ELAC Varro RS500-SB is the only one of these two you can connect at all.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.