In this review, we will be comparing Varro DS1200-GB and RP-1200SW, two Powered Subwoofer speakers from ELAC and Klipsch. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of ELAC Varro DS1200-GB and Klipsch RP-1200SW first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking through our links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.ELAC Varro DS1200-GB and Klipsch RP-1200SW have a totally different setup: the ELAC Varro DS1200-GB features 2 x 12-inch drivers whereas the RP-1200SW features 1 x 12-inch drivers.
Frequency Response
Varro DS1200-GB has a frequency range of 17-150 Hz whereas RP-1200SW has a frequency range of 16.5-138 Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The ELAC Varro DS1200-GB has a Acoustic Suspension type cabinet. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs. On the other hand the Klipsch RP-1200SW have Bass Reflex type enclosure. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare ELAC Varro DS1200-GB's and Klipsch RP-1200SW's external dimensions. ELAC Varro DS1200-GB has external dimensions of 423.0 x 483.0 x 418.0mm (16-5/8inch x 19inch x 16-7/16inch) whereas Klipsch RP-1200SW has external dimensions of 482.0 x 432.0 x 659.0mm (18-15/16inch x 17inch x 25-15/16inch).
ELAC Varro DS1200-GB is 59mm shorter and 241mm less deeper than Klipsch RP-1200SW but it is also 51mm wider.
Below you can see the front view size comparison of ELAC Varro DS1200-GB and Klipsch RP-1200SW in scale.
Comparison image of ELAC Varro DS1200-GB and Klipsch RP-1200SW Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the ELAC Varro DS1200-GB is approximately 2018.9cm2 / 312.9inch2 and base area of the Klipsch RP-1200SW is approximately 2846.9cm2 / 441.3inch2. The Varro DS1200-GB requires 29% less surface area than the RP-1200SW which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The ELAC Varro DS1200-GB weighs 38.00kg / 83.6lbs and the Klipsch RP-1200SW weighs 31.18kg / 68.6lbs. This makes the Varro DS1200-GB 22% heavier than the RP-1200SW.
Here is a comparison of how Varro DS1200-GB and RP-1200SW's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 Number of Woofers |
2
vs
1
|
More woofers |
 High Frequency Response |
150 Hz
vs
138 Hz
|
Generates higher frequency |
 App-Based Control |
iOS,Android
vs
None
|
Control the speaker via an app |
 Height |
423mm
vs
482mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
2018cm2
vs
2846cm2
|
Takes less floor space |
 Ethernet Connection |
Yes
vs
No
|
High quality streaming over Ethernet |
 Price per pair* |
999USD
vs
2999USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
ELAC Varro DS1200-GB |
Klipsch Reference Premiere RP-1200SW |
| Brand |
ELAC |
Klipsch |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
1200 watts |
400 watts |
| Frequency Response |
17-150 Hz |
16.5-138 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
1200-watt RMS |
400-watt RMS |
| Watts Peak (Max) |
2400-watt RMS |
800-watt RMS |
Drivers |
|
|
| Woofer Quantity |
2 |
1 |
| Woofer Size |
12" |
12" |
| Woofer Composition |
Aluminum |
Cerametallic |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
423.0mm (16.7") |
482.0mm (19") |
| Width |
483.0mm (19") |
432.0mm (17") |
| Depth |
418.0mm (16.5") |
659.0mm (25.9") |
| Weight |
38.00kg (83.6lbs) |
31.18kg (68.6lbs) |
| Enclosure |
Acoustic Suspension |
Bass Reflex |
| Finish |
MDF |
MDF with Vinyl |
| Available Colors |
Gloss Black |
Ebony |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| USB Port |
USB-A port for firmware updates |
n/a |
| Ethernet Port |
Yes |
n/a |
Other |
|
|
| Parts Warranty |
1 year |
5 years |
| Labor Warranty |
1 year |
5 years |
A sealed subwoofer against a ported one. That is the most consequential line on this page: it decides how the bass rolls off, how it behaves in a small room, and how much output you get for the size of the box.
| Area | Better | Why |
|---|
| Bass depth | evenly matched | Effectively the same reach (17Hz vs 17Hz). |
| Amplifier power | A | ELAC Varro DS1200-GB has the bigger amplifier - 1200W against 400W RMS, about 4.8dB more on tap. In a large room that is headroom before the DSP starts limiting. |
| Driver area | A | ELAC Varro DS1200-GB moves more air: 2 x 12" against 12" is 2x the cone area, not the 1.41x the diameters suggest. More area means the same output with less excursion, and less distortion with it. |
| Enclosure | depends | ELAC Varro DS1200-GB is sealed - a sealed box rolls off gently and is usually the easier one to integrate in a small or awkward room; Klipsch RP-1200SW is ported - a ported box gives more output low down for its size, at the cost of a steeper roll-off below tuning. Neither is better in the abstract; ported tends to suit films and sealed tends to suit music, and both generalisations have exceptions. |
| Speaker-level inputs | A | ELAC Varro DS1200-GB takes a speaker-level connection as well as line level. That is what lets it work with an integrated amplifier or a vintage receiver that has no subwoofer output at all. |
| Driver placement | depends | ELAC Varro DS1200-GB fires side and Klipsch RP-1200SW fires front. A down-firing driver is more forgiving of a grille-less look and of a hard floor; a front-firing one is the safer choice on a thick carpet or a suspended timber floor. |
| Cabinet size | depends | ELAC Varro DS1200-GB is about 38% smaller by volume. In a subwoofer that is a real trade rather than a preference: box volume is how you get output low down without a bigger amplifier. |
| Warranty | B | Klipsch RP-1200SW carries 5 years on parts against 1 years. A subwoofer amplifier works harder than anything else in the system, so this is not a throwaway line. |
| Price | B | Klipsch RP-1200SW costs less - $999 against $2,999, about 67% less. |
A ELAC Varro DS1200-GB B Klipsch RP-1200SW
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
The usual trade-off: ELAC Varro DS1200-GB measures better, Klipsch RP-1200SW costs about 67% less. In a normal room, placement will make a bigger difference than the gap between these two. Films or music? If this is mainly a home cinema, Klipsch RP-1200SW will hit harder for the money; if it is mainly for music in a normal-sized room, ELAC Varro DS1200-GB is usually the easier one to make sound right. Check your amplifier first: if it has no subwoofer or preamp output, ELAC Varro DS1200-GB is the only one of these two you can connect at all.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.