In this review, we will be comparing Varro DS1200-GB and DB3D, two Powered Subwoofer speakers from ELAC and Bowers Wilkins. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of ELAC Varro DS1200-GB and B&W DB3D first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both ELAC Varro DS1200-GBand B&W DB3D have a double woofer setup however the ELAC Varro DS1200-GB's woofer is 12-inch whereas the B&W DB3D features a 8-inch woofer.
Frequency Response
Varro DS1200-GB has a frequency range of 17-150 Hz whereas DB3D has a frequency range of 10-350Hz. With a minimum frequency of 10Hz, the DB3D can go significantly deeper on the low side and provide stronger bass compared to the Varro DS1200-GB's min frequency of 17Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
Both ELAC Varro DS1200-GB and B&W DB3D have Acoustic Suspension type cabinets. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare ELAC Varro DS1200-GB's and B&W DB3D's external dimensions. ELAC Varro DS1200-GB has external dimensions of 423.0 x 483.0 x 418.0mm (16-5/8inch x 19inch x 16-7/16inch) whereas B&W DB3D has external dimensions of 368.3 x 341.3 x 347.7mm ().
ELAC Varro DS1200-GB is clearly the larger of the two speakers. Its body is 141.7mm wider, 54.7mm taller and 70.3mm deeper than B&W DB3D.
Size, drawn to scale
Both speakers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same surface and pushed back to the same wall, so the deeper one visibly sticks out further.
ELAC Varro DS1200-GB needs about 70% more floor or shelf area. ELAC Varro DS1200-GB is 70mm deeper, so it stands that much further out from the wall. ELAC Varro DS1200-GB is 55mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the ELAC Varro DS1200-GB is approximately 2018.9cm2 / 312.9inch2 and base area of the B&W DB3D is approximately 1186.7cm2 / 183.9inch2. The Varro DS1200-GB requires 70% more surface area than the DB3D which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The ELAC Varro DS1200-GB weighs 38.00kg / 83.6lbs and the B&W DB3D weighs 25.05kg / 55.1lbs. This makes the Varro DS1200-GB 52% heavier than the DB3D.
Here is a comparison of how Varro DS1200-GB and DB3D's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of ELAC Varro DS1200-GB?
Here are the items that are included inside the box of Varro DS1200-GB:
- 2 Grilles
- Power Cord
- 4 Spikes
What's in the Box of B&W DB3D?
Here are the items that come with the DB3D:
- Powered subwoofer
- 2 Grilles
- 6.5-feet AC power cord
- 4 Decoupling feet
- 4 Rubber feet
- 4 Spike feet
- 4 Lock-nuts
- Cleaning cloth
- Quickstart Guide
- Bowers & Wilkins brochure
- Warranty Information
- Cleaning cloth instructions
Woofer Size |
12 inches
vs
8 inches
|
Larger woofer |
Price per pair* |
3199USD
vs
3499USD
|
costs less (*prices may change depending on the seller, location and time) |
Ethernet Connection |
Yes
vs
No
|
High quality streaming over Ethernet |
Low Frequency Response |
10 Hz
vs
17 Hz
|
Generates deeper bass |
High Frequency Response |
350 Hz
vs
150 Hz
|
Generates higher frequency |
Height |
368mm
vs
423mm
|
Easier to fit in smaller spaces |
Base Surface Area |
1186cm2
vs
2018cm2
|
Takes less floor space |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
ELAC Varro DS1200-GB needs about 70% more floor area. ELAC Varro DS1200-GB stands 70mm further into the room. ELAC Varro DS1200-GB is 55mm taller.
| General |
ELAC Varro DS1200-GB |
Bowers & Wilkins DB3D |
| Brand |
ELAC |
Bowers Wilkins |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
1200 watts |
1000 watts |
| Frequency Response |
17-150 Hz |
10-350Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
1200-watt RMS |
1000-watt RMS |
| Watts Peak (Max) |
2400-watt RMS |
n/a |
Drivers |
|
|
| Woofer Quantity |
2 |
2 |
| Woofer Size |
12" |
8" |
| Woofer Composition |
Aluminum |
|
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
n/a |
Physical Specs |
|
|
| Height |
423.0mm (16.7") |
368.3mm (14.5") |
| Width |
483.0mm (19") |
341.3mm (13.4") |
| Depth |
418.0mm (16.5") |
347.7mm (13.7") |
| Weight |
38.00kg (83.6lbs) |
25.05kg (55.1lbs) |
| Enclosure |
Acoustic Suspension |
Acoustic Suspension |
| Finish |
MDF |
n/a |
| Available Colors |
Gloss Black |
n/a |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| USB Port |
USB-A port for firmware updates |
n/a |
| Ethernet Port |
Yes |
n/a |
Other |
|
|
| Parts Warranty |
1 year |
2 Years |
| Labor Warranty |
1 year |
2 Years |
Two quite different sizes of subwoofer. Room volume decides this more than anything else on the page: a big driver in a small room is wasted, and a small one in a large room is worked to death.
| Area | Better | Why |
|---|
| Bass depth | B | B&W DB3D goes deeper - 10Hz against 17Hz. Under 20Hz is felt more than heard - the bottom of a pipe organ and the bottom of a film mix. |
| Amplifier power | evenly matched | Much the same amplifier (1200W vs 1000W RMS) - under 1dB apart. |
| Driver area | A | ELAC Varro DS1200-GB moves more air: 2 x 12" against 2 x 8" is 2.25x the cone area, not the 1.5x the diameters suggest. More area means the same output with less excursion, and less distortion with it. |
| Enclosure | evenly matched | Both are sealed designs, so they roll off in much the same way. |
| Setup and tuning | evenly matched | The same tuning tools on both (app control). |
| Cabinet size | depends | B&W DB3D is about 49% smaller by volume. In a subwoofer that is a real trade rather than a preference: box volume is how you get output low down without a bigger amplifier. |
| Warranty | B | B&W DB3D carries 2 years on parts against 1 years. A subwoofer amplifier works harder than anything else in the system, so this is not a throwaway line. |
| Price | A | ELAC Varro DS1200-GB costs less - $3,199 against $3,499, about 9% less. |
A ELAC Varro DS1200-GB B B&W DB3D
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
The usual trade-off: B&W DB3D measures better, ELAC Varro DS1200-GB costs about 9% less. In a normal room, placement will make a bigger difference than the gap between these two. If placement is the constraint - a corner, behind a sofa, under a desk - B&W DB3D is the one that will actually go there, and a well-placed small subwoofer beats a badly-placed big one every time.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.