In this review, we will be comparing Muro SUB2020 and ASW610, two Powered Subwoofer speakers from ELAC and Bowers Wilkins. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of ELAC Muro SUB2020 and B&W ASW610 first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.ELAC Muro SUB2020and B&W ASW610 have the same driver set up: Both subwoofers have 1 x 10" drivers.
Frequency Response
Muro SUB2020 has a frequency range of 28-200 Hz whereas ASW610 has a frequency range of 27-140 Hz. With a minimum frequency of 27Hz, the ASW610 can go slightly deeper then the Muro SUB2020's min frequency of 28Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
Both ELAC Muro SUB2020 and B&W ASW610 have Acoustic Suspension type cabinets. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare ELAC Muro SUB2020's and B&W ASW610's external dimensions. ELAC Muro SUB2020 has external dimensions of 399.0 x 185.0 x 515.0mm (15-11/16 x 7-1/4 x 20-1/4inch) whereas B&W ASW610 has external dimensions of 321.0 x 312.0 x 394.0mm (12-5/8 x 12-1/4 x 15-1/2inch).
B&W ASW610 is 78mm shorter and 121mm less deeper than ELAC Muro SUB2020 but it is also 127mm wider.
Below you can see the front view size comparison of ELAC Muro SUB2020 and B&W ASW610 in scale.
Comparison image of ELAC Muro SUB2020 and B&W ASW610 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the ELAC Muro SUB2020 is approximately 952.8cm2 / 147.7inch2 and base area of the B&W ASW610 is approximately 1229.3cm2 / 190.5inch2. The Muro SUB2020 requires 22% less surface area than the ASW610 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The ELAC Muro SUB2020 weighs 12.73kg / 28lbs and the B&W ASW610 weighs 12.55kg / 27.6lbs. This makes the Muro SUB2020 1% heavier than the ASW610.
Here is a comparison of how Muro SUB2020 and ASW610's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of ELAC Muro SUB2020?
Here are the items that are included inside the box of Muro SUB2020:
- Powered subwoofer
- 8-feet AC power cord
- 4 Cone feet
- 2 Brackets
- 2 Machine screws
- 2 Wood screws
- 2 Washers
- 2 Wall anchors
- Operating Instructions
What's in the Box of B&W ASW610?
Here are the items that come with the ASW610:
- Powered subwoofer
- Grille
- 6.5-feet AC power cord
- 4 Rubber feet
- 4 Spike feet
- 4 Lock-nuts
- Manual
- Bowers & Wilkins brochure
- Warranty Information
 High Frequency Response |
200 Hz
vs
140 Hz
|
Generates higher frequency |
 App-Based Control |
iOS,Android
vs
None
|
Control the speaker via an app |
 Base Surface Area |
952cm2
vs
1229cm2
|
Takes less floor space |
 Wireless Operation |
Optional
vs
No
|
Connect your subwoofer to your system wireless |
 Low Frequency Response |
27 Hz
vs
28 Hz
|
Generates deeper bass |
 Height |
321mm
vs
399mm
|
Easier to fit in smaller spaces |
 Price per pair* |
899USD
vs
1000USD
|
costs less (*prices may change depending on the seller, location and time) |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
B&W ASW610 needs about 29% more floor area. ELAC Muro SUB2020 stands 121mm further into the room. ELAC Muro SUB2020 is 78mm taller.
| General |
ELAC Muro SUB2020 |
Bowers & Wilkins ASW610 |
| Brand |
ELAC |
Bowers Wilkins |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
200 watts |
200 watts |
| Frequency Response |
28-200 Hz |
27-140 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
200-watt RMS |
200-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
10" |
10" |
| Woofer Composition |
Woven Cellulose Fiber |
Paper/Aramid Fiber |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
side or bottom |
front |
Physical Specs |
|
|
| Height |
399.0mm (15.7") |
321.0mm (12.6") |
| Width |
185.0mm (7.3") |
312.0mm (12.3") |
| Depth |
515.0mm (20.3") |
394.0mm (15.5") |
| Weight |
12.73kg (28lbs) |
12.55kg (27.6lbs) |
| Enclosure |
Acoustic Suspension |
Acoustic Suspension |
| Grille |
n/a |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
1 Year |
2 Years |
| Labor Warranty |
1 Year |
2 Years |
No single best subwoofer here. Your room, where the box can physically go, and whether this is mainly for films or mainly for music will settle it long before the specs do.
| Area | Better | Why |
|---|
| Bass depth | evenly matched | Effectively the same reach (28Hz vs 27Hz). |
| Amplifier power | evenly matched | Much the same amplifier (200W vs 200W RMS) - under 1dB apart. |
| Driver area | evenly matched | Near-identical radiating area (10" against 10"). |
| Enclosure | evenly matched | Both are sealed designs, so they roll off in much the same way. |
| Speaker-level inputs | B | B&W ASW610 takes a speaker-level connection as well as line level. That is what lets it work with an integrated amplifier or a vintage receiver that has no subwoofer output at all. |
| Wireless option | depends | Only ELAC Muro SUB2020 offers a wireless link (as a paid option). It decides where the sub can go if you cannot run a cable, and is worth nothing if you can. |
| Driver placement | depends | ELAC Muro SUB2020 fires side or down and B&W ASW610 fires front. A down-firing driver is more forgiving of a grille-less look and of a hard floor; a front-firing one is the safer choice on a thick carpet or a suspended timber floor. |
| Warranty | B | B&W ASW610 carries 2 years on parts against 1 years. A subwoofer amplifier works harder than anything else in the system, so this is not a throwaway line. |
| Price | B | B&W ASW610 costs less - $899 against $1,000, about 10% less. |
A ELAC Muro SUB2020 B B&W ASW610
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
B&W ASW610 is the easier recommendation: it leads on most of the measured areas and costs less. Take ELAC Muro SUB2020 if one of the "depends" rows describes your room. Check your amplifier first: if it has no subwoofer or preamp output, B&W ASW610 is the only one of these two you can connect at all.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.