In this review, we will be comparing Muro SUB2010 and ASW610, two Powered Subwoofer speakers from ELAC and Bowers Wilkins. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of ELAC Muro SUB2010 and B&W ASW610 first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both ELAC Muro SUB2010and B&W ASW610 have a single woofer setup however the ELAC Muro SUB2010's woofer is 8-inch whereas the B&W ASW610 features a 10-inch woofer.
Frequency Response
Muro SUB2010 has a frequency range of 38-150 Hz whereas ASW610 has a frequency range of 27-140 Hz. With a minimum frequency of 27Hz, the ASW610 can go significantly deeper on the low side and provide stronger bass compared to the Muro SUB2010's min frequency of 38Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The ELAC Muro SUB2010 has a Bass Reflex type cabinet. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs. On the other hand the B&W ASW610 have Acoustic Suspension type enclosure. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare ELAC Muro SUB2010's and B&W ASW610's external dimensions. ELAC Muro SUB2010 has external dimensions of 388.0 x 135.0 x 405.0mm (15-1/4 x 5-5/16 x 15-15/16inch) whereas B&W ASW610 has external dimensions of 321.0 x 312.0 x 394.0mm (12-5/8 x 12-1/4 x 15-1/2inch).
B&W ASW610 is 67mm shorter and 11mm less deeper than ELAC Muro SUB2010 but it is also 177mm wider.
Below you can see the front view size comparison of ELAC Muro SUB2010 and B&W ASW610 in scale.
Comparison image of ELAC Muro SUB2010 and B&W ASW610 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the ELAC Muro SUB2010 is approximately 546.8cm2 / 84.8inch2 and base area of the B&W ASW610 is approximately 1229.3cm2 / 190.5inch2. The Muro SUB2010 requires 56% less surface area than the ASW610 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The ELAC Muro SUB2010 weighs 7.82kg / 17.2lbs and the B&W ASW610 weighs 12.55kg / 27.6lbs. This makes the ASW610 60% heavier than the Muro SUB2010.
Here is a comparison of how Muro SUB2010 and ASW610's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of ELAC Muro SUB2010?
Here are the items that are included inside the box of Muro SUB2010:
- Powered subwoofer
- 6-feet AC power cord
- 4 Cone feet
- 2 Brackets
- 2 Machine screws
- 2 Wood screws
- 2 Washers
- 2 Wall anchors
- Operating Instructions
What's in the Box of B&W ASW610?
Here are the items that come with the ASW610:
- Powered subwoofer
- Grille
- 6.5-feet AC power cord
- 4 Rubber feet
- 4 Spike feet
- 4 Lock-nuts
- Manual
- Bowers & Wilkins brochure
- Warranty Information
 High Frequency Response |
150 Hz
vs
140 Hz
|
Generates higher frequency |
 App-Based Control |
iOS,Android
vs
None
|
Control the speaker via an app |
 Base Surface Area |
546cm2
vs
1229cm2
|
Takes less floor space |
 Price per pair* |
770USD
vs
899USD
|
costs less (*prices may change depending on the seller, location and time) |
 Wireless Operation |
Optional
vs
No
|
Connect your subwoofer to your system wireless |
 Woofer Size |
10 inches
vs
8 inches
|
Larger woofer |
| Low Frequency Response |
27 Hz
vs
38 Hz
|
Generates deeper bass |
 Height |
321mm
vs
388mm
|
Easier to fit in smaller spaces |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
B&W ASW610 needs about 125% more floor area. ELAC Muro SUB2010 is 67mm taller.
| General |
ELAC Muro SUB2010 |
Bowers & Wilkins ASW610 |
| Brand |
ELAC |
Bowers Wilkins |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
125 watts |
200 watts |
| Frequency Response |
38-150 Hz |
27-140 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
125-watt RMS |
200-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
8" |
10" |
| Woofer Composition |
Polypropylene |
Paper/Aramid Fiber |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
side or bottom |
front |
Physical Specs |
|
|
| Height |
388.0mm (15.3") |
321.0mm (12.6") |
| Width |
135.0mm (5.3") |
312.0mm (12.3") |
| Depth |
405.0mm (15.9") |
394.0mm (15.5") |
| Weight |
7.82kg (17.2lbs) |
12.55kg (27.6lbs) |
| Enclosure |
Bass Reflex |
Acoustic Suspension |
| Grille |
n/a |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
1 Year |
2 Years |
| Labor Warranty |
1 Year |
2 Years |
A ported subwoofer against a sealed one. That is the most consequential line on this page: it decides how the bass rolls off, how it behaves in a small room, and how much output you get for the size of the box.
| Area | Better | Why |
|---|
| Bass depth | B | B&W ASW610 goes deeper - 27Hz against 38Hz. A real difference, though most music has little content below 38Hz. |
| Amplifier power | B | B&W ASW610 has the bigger amplifier - 200W against 125W RMS, about 2dB more on tap. In a large room that is headroom before the DSP starts limiting. |
| Driver area | B | B&W ASW610 moves more air: 10" against 8" is 1.56x the cone area, not the 1.25x the diameters suggest. More area means the same output with less excursion, and less distortion with it. |
| Enclosure | depends | ELAC Muro SUB2010 is ported - a ported box gives more output low down for its size, at the cost of a steeper roll-off below tuning; B&W ASW610 is sealed - a sealed box rolls off gently and is usually the easier one to integrate in a small or awkward room. Neither is better in the abstract; ported tends to suit films and sealed tends to suit music, and both generalisations have exceptions. |
| Speaker-level inputs | B | B&W ASW610 takes a speaker-level connection as well as line level. That is what lets it work with an integrated amplifier or a vintage receiver that has no subwoofer output at all. |
| Wireless option | depends | Only ELAC Muro SUB2010 offers a wireless link (as a paid option). It decides where the sub can go if you cannot run a cable, and is worth nothing if you can. |
| Driver placement | depends | ELAC Muro SUB2010 fires side or down and B&W ASW610 fires front. A down-firing driver is more forgiving of a grille-less look and of a hard floor; a front-firing one is the safer choice on a thick carpet or a suspended timber floor. |
| Cabinet size | depends | ELAC Muro SUB2010 is about 46% smaller by volume. In a subwoofer that is a real trade rather than a preference: box volume is how you get output low down without a bigger amplifier. |
| Warranty | B | B&W ASW610 carries 2 years on parts against 1 years. A subwoofer amplifier works harder than anything else in the system, so this is not a throwaway line. |
| Price | A | ELAC Muro SUB2010 costs less - $770 against $899, about 14% less. |
A ELAC Muro SUB2010 B B&W ASW610
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
B&W ASW610 leads across most of the measured areas for a modest premium, so it is the easier pick if the budget stretches. ELAC Muro SUB2010 is the one to take if it does not. Films or music? If this is mainly a home cinema, ELAC Muro SUB2010 will hit harder for the money; if it is mainly for music in a normal-sized room, B&W ASW610 is usually the easier one to make sound right. Check your amplifier first: if it has no subwoofer or preamp output, B&W ASW610 is the only one of these two you can connect at all.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.