In this review, we will be comparing Debut S10 2 and ProSub 1000, two Powered Subwoofer speakers from ELAC and Definitive Technology. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of ELAC Debut S10 2 and Definitive ProSub 1000 first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.ELAC Debut S10 2and Definitive ProSub 1000 have the same driver set up: Both subwoofers have 1 x 10" drivers.
Frequency Response
Debut S10 2 has a frequency range of 35-150 Hz whereas ProSub 1000 has a frequency range of 18-150 Hz. With a minimum frequency of 18Hz, the ProSub 1000 can go significantly deeper on the low side and provide stronger bass compared to the Debut S10 2's min frequency of 35Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare ELAC Debut S10 2's and Definitive ProSub 1000's external dimensions. ELAC Debut S10 2 has external dimensions of 368.3 x 344.5 x 379.4mm () whereas Definitive ProSub 1000 has external dimensions of 366.0 x 307.0 x 486.0mm (14-3/8 x 12-1/16 x 19-1/8inch).
Definitive ProSub 1000 is 37.5mm narrower and 2.3mm shorter than ELAC Debut S10 2 but it is also 106.6mm deeper.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the ELAC Debut S10 2 is approximately 1307.0cm2 / 202.6inch2 and base area of the Definitive ProSub 1000 is approximately 1492.0cm2 / 231.3inch2. The Debut S10 2 requires 12% less surface area than the ProSub 1000 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The ELAC Debut S10 2 weighs 13.02kg / 28.6lbs and the Definitive ProSub 1000 weighs 14.09kg / 31lbs. This makes the ProSub 1000 8% heavier than the Debut S10 2.
Here is a comparison of how Debut S10 2 and ProSub 1000's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 Base Surface Area |
1307cm2
vs
1492cm2
|
Takes less floor space |
 Price per pair* |
399USD
vs
499USD
|
costs less (*prices may change depending on the seller, location and time) |
 Low Frequency Response |
18 Hz
vs
35 Hz
|
Generates deeper bass |
 Height |
366mm
vs
368mm
|
Easier to fit in smaller spaces |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
Definitive ProSub 1000 needs about 14% more floor area. Definitive ProSub 1000 stands 107mm further into the room.
| General |
ELAC Debut S10 2 |
Definitive Technology ProSub 1000 |
| Brand |
ELAC |
Definitive Technology |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Frequency Response |
35-150 Hz |
18-150 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
100-watt RMS |
300-watt RMS |
| Watts Peak (Max) |
200-watt RMS |
n/a |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
10" |
10" |
| Woofer Composition |
|
Polymer |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
n/a |
40-150 Hz and 80 Hz |
| Firing Direction |
n/a |
front |
Physical Specs |
|
|
| Height |
368.3mm (14.5") |
366.0mm (14.4") |
| Width |
344.5mm (13.6") |
307.0mm (12.1") |
| Depth |
379.4mm (14.9") |
486.0mm (19.1") |
| Weight |
13.02kg (28.6lbs) |
14.09kg (31lbs) |
| Enclosure |
|
Passive Radiator |
| Grille |
n/a |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
3 Years |
3 Years |
| Labor Warranty |
3 Years |
3 Years |
A ported subwoofer against a passive radiator one. That is the most consequential line on this page: it decides how the bass rolls off, how it behaves in a small room, and how much output you get for the size of the box.
| Area | Better | Why |
|---|
| Bass depth | B | Definitive ProSub 1000 goes deeper - 18Hz against 35Hz. Under 20Hz is felt more than heard - the bottom of a pipe organ and the bottom of a film mix. |
| Amplifier power | B | Definitive ProSub 1000 has the bigger amplifier - 300W against 100W RMS, about 4.8dB more on tap. In a large room that is headroom before the DSP starts limiting. |
| Driver area | evenly matched | Near-identical radiating area (10" against 10"). |
| Enclosure | depends | ELAC Debut S10 2 is ported - a ported box gives more output low down for its size, at the cost of a steeper roll-off below tuning; Definitive ProSub 1000 is passive radiator - a passive radiator behaves like a port without the pipe noise, and suits a slim cabinet. Neither is better in the abstract; ported tends to suit films and sealed tends to suit music, and both generalisations have exceptions. |
| Price | A | ELAC Debut S10 2 costs less - $399 against $499, about 20% less. |
A ELAC Debut S10 2 B Definitive ProSub 1000
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
The usual trade-off: Definitive ProSub 1000 measures better, ELAC Debut S10 2 costs about 20% less. In a normal room, placement will make a bigger difference than the gap between these two.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.