In this review, we will be comparing Debut 2.0 SUB3010 and ASW610, two Powered Subwoofer speakers from ELAC and Bowers Wilkins. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of ELAC Debut 2.0 SUB3010 and B&W ASW610 first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking through our links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.ELAC Debut 2.0 SUB3010and B&W ASW610 have the same driver set up: Both subwoofers have 1 x 10" drivers.
Frequency Response
Debut 2.0 SUB3010 has a frequency range of 28-150 Hz whereas ASW610 has a frequency range of 27-140 Hz. With a minimum frequency of 27Hz, the ASW610 can go slightly deeper then the Debut 2.0 SUB3010's min frequency of 28Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The ELAC Debut 2.0 SUB3010 has a Passive radiator type cabinet. On the other hand the B&W ASW610 have Acoustic Suspension type enclosure. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare ELAC Debut 2.0 SUB3010's and B&W ASW610's external dimensions. ELAC Debut 2.0 SUB3010 has external dimensions of 374.0 x 355.0 x 383.0mm (14-11/16 x 13-15/16 x 15-1/16inch) whereas B&W ASW610 has external dimensions of 321.0 x 312.0 x 394.0mm (12-5/8 x 12-1/4 x 15-1/2inch).
B&W ASW610 is 43mm narrower and 53mm shorter than ELAC Debut 2.0 SUB3010 but it is also 11mm deeper.
Below you can see the front view size comparison of ELAC Debut 2.0 SUB3010 and B&W ASW610 in scale.
Comparison image of ELAC Debut 2.0 SUB3010 and B&W ASW610 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the ELAC Debut 2.0 SUB3010 is approximately 1359.7cm2 / 210.8inch2 and base area of the B&W ASW610 is approximately 1229.3cm2 / 190.5inch2. The Debut 2.0 SUB3010 requires 11% more surface area than the ASW610 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The ELAC Debut 2.0 SUB3010 weighs 14.59kg / 32.1lbs and the B&W ASW610 weighs 12.55kg / 27.6lbs. This makes the Debut 2.0 SUB3010 16% heavier than the ASW610.
Here is a comparison of how Debut 2.0 SUB3010 and ASW610's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of ELAC Debut 2.0 SUB3010?
Here are the items that are included inside the box of Debut 2.0 SUB3010:
- Powered subwoofer
- 9-feet AC power cord
- 4 Spikes
- 4 Hex-nuts
- Operating Instructions
What's in the Box of B&W ASW610?
Here are the items that come with the ASW610:
- Powered subwoofer
- Grille
- 6.5-feet AC power cord
- 4 Rubber feet
- 4 Spike feet
- 4 Lock-nuts
- Manual
- Bowers & Wilkins brochure
- Warranty Information
 High Frequency Response |
150 Hz
vs
140 Hz
|
Generates higher frequency |
 App-Based Control |
iOS,Android
vs
None
|
Control the speaker via an app |
 Price per pair* |
650USD
vs
899USD
|
costs less (*prices may change depending on the seller, location and time) |
 Low Frequency Response |
27 Hz
vs
28 Hz
|
Generates deeper bass |
 Height |
321mm
vs
374mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1229cm2
vs
1359cm2
|
Takes less floor space |
| General |
ELAC Debut 2.0 SUB3010 |
Bowers & Wilkins ASW610 |
| Brand |
ELAC |
Bowers Wilkins |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
200 watts |
200 watts |
| Frequency Response |
28-150 Hz |
27-140 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
200-watt RMS |
200-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
10" |
10" |
| Woofer Composition |
Doped Paper |
Paper/Aramid Fiber |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
374.0mm (14.7") |
321.0mm (12.6") |
| Width |
355.0mm (14") |
312.0mm (12.3") |
| Depth |
383.0mm (15.1") |
394.0mm (15.5") |
| Weight |
14.59kg (32.1lbs) |
12.55kg (27.6lbs) |
| Enclosure |
Passive radiator |
Acoustic Suspension |
| Grille |
n/a |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
1 Year |
2 Years |
| Labor Warranty |
1 Year |
2 Years |
A passive radiator subwoofer against a sealed one. That is the most consequential line on this page: it decides how the bass rolls off, how it behaves in a small room, and how much output you get for the size of the box.
| Area | Better | Why |
|---|
| Bass depth | evenly matched | Effectively the same reach (28Hz vs 27Hz). |
| Amplifier power | evenly matched | Much the same amplifier (200W vs 200W RMS) - under 1dB apart. |
| Driver area | evenly matched | Near-identical radiating area (10" against 10"). |
| Enclosure | depends | ELAC Debut 2.0 SUB3010 is passive radiator - a passive radiator behaves like a port without the pipe noise, and suits a slim cabinet; B&W ASW610 is sealed - a sealed box rolls off gently and is usually the easier one to integrate in a small or awkward room. Neither is better in the abstract; ported tends to suit films and sealed tends to suit music, and both generalisations have exceptions. |
| Speaker-level inputs | B | B&W ASW610 takes a speaker-level connection as well as line level. That is what lets it work with an integrated amplifier or a vintage receiver that has no subwoofer output at all. |
| Cabinet size | depends | B&W ASW610 is about 22% smaller by volume. In a subwoofer that is a real trade rather than a preference: box volume is how you get output low down without a bigger amplifier. |
| Warranty | B | B&W ASW610 carries 2 years on parts against 1 years. A subwoofer amplifier works harder than anything else in the system, so this is not a throwaway line. |
| Price | A | ELAC Debut 2.0 SUB3010 costs less - $650 against $899, about 28% less. |
A ELAC Debut 2.0 SUB3010 B B&W ASW610
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
The usual trade-off: B&W ASW610 measures better, ELAC Debut 2.0 SUB3010 costs about 28% less. In a normal room, placement will make a bigger difference than the gap between these two. Films or music? If this is mainly a home cinema, ELAC Debut 2.0 SUB3010 will hit harder for the money; if it is mainly for music in a normal-sized room, B&W ASW610 is usually the easier one to make sound right. Check your amplifier first: if it has no subwoofer or preamp output, B&W ASW610 is the only one of these two you can connect at all.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.