In this review, we will be comparing DS153 and PB-1000 Pro, two Powered Subwoofer speakers from ELAC and SVS. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of ELAC DS153 and SVS PB-1000 Pro first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both ELAC DS153and SVS PB-1000 Pro have a single woofer setup however the ELAC DS153's woofer is 15-inch whereas the SVS PB-1000 Pro features a 12-inch woofer.
Frequency Response
DS153 has a frequency range of 20-150 Hz whereas PB-1000 Pro has a frequency range of 17-260 Hz. With a minimum frequency of 17Hz, the PB-1000 Pro can go slightly deeper then the DS153's min frequency of 20Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare ELAC DS153's and SVS PB-1000 Pro's external dimensions. ELAC DS153 has external dimensions of 485.8 x 469.9 x 552.5mm () whereas SVS PB-1000 Pro has external dimensions of 479.0 x 380.0 x 509.0mm (18-13/16inch x 15inch x 20-15/16inch).
ELAC DS153 is clearly the larger of the two speakers. Its body is 89.9mm wider, 6.8mm taller and 43.5mm deeper than SVS PB-1000 Pro.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the ELAC DS153 is approximately 2596.2cm2 / 402.4inch2 and base area of the SVS PB-1000 Pro is approximately 1934.2cm2 / 299.8inch2. The DS153 requires 34% more surface area than the PB-1000 Pro which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The ELAC DS153 weighs 25.10kg / 55.2lbs and the SVS PB-1000 Pro weighs 19.30kg / 42.5lbs. This makes the DS153 30% heavier than the PB-1000 Pro.
Here is a comparison of how DS153 and PB-1000 Pro's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 Woofer Size |
15 inches
vs
12 inches
|
Larger woofer |
| Low Frequency Response |
17 Hz
vs
20 Hz
|
Generates deeper bass |
 High Frequency Response |
260 Hz
vs
150 Hz
|
Generates higher frequency |
 App-Based Control |
iOS,Android
vs
None
|
Control the speaker via an app |
 Height |
479mm
vs
485mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1934cm2
vs
2596cm2
|
Takes less floor space |
 Price per pair* |
799USD
vs
949USD
|
costs less (*prices may change depending on the seller, location and time) |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
ELAC DS153 needs about 34% more floor area. ELAC DS153 stands 44mm further into the room.
| General |
ELAC DS153 |
SVS PB-1000 Pro |
| Brand |
ELAC |
SVS |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Frequency Response |
20-150 Hz |
17-260 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
300-watt RMS |
325-watt RMS |
| Watts Peak (Max) |
600-watt RMS |
820-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
15" |
12" |
| Woofer Composition |
|
Fiber-composite |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
n/a |
front |
Physical Specs |
|
|
| Height |
485.8mm (19.1") |
479.0mm (18.9") |
| Width |
469.9mm (18.5") |
380.0mm (15") |
| Depth |
552.5mm (21.8") |
509.0mm (20") |
| Weight |
25.10kg (55.2lbs) |
19.30kg (42.5lbs) |
| Enclosure |
|
Bass Reflex |
| Available Colors |
n/a |
Black |
| Grille |
n/a |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
1 Year |
5 Years |
| Labor Warranty |
1 Year |
5 Years |
A sealed subwoofer against a ported one. That is the most consequential line on this page: it decides how the bass rolls off, how it behaves in a small room, and how much output you get for the size of the box.
| Area | Better | Why |
|---|
| Bass depth | B | SVS PB-1000 Pro goes deeper - 17Hz against 20Hz. Under 20Hz is felt more than heard - the bottom of a pipe organ and the bottom of a film mix. |
| Amplifier power | evenly matched | Much the same amplifier (300W vs 325W RMS) - under 1dB apart. |
| Driver area | A | ELAC DS153 moves more air: 15" against 12" is 1.56x the cone area, not the 1.25x the diameters suggest. More area means the same output with less excursion, and less distortion with it. |
| Enclosure | depends | ELAC DS153 is sealed - a sealed box rolls off gently and is usually the easier one to integrate in a small or awkward room; SVS PB-1000 Pro is ported - a ported box gives more output low down for its size, at the cost of a steeper roll-off below tuning. Neither is better in the abstract; ported tends to suit films and sealed tends to suit music, and both generalisations have exceptions. |
| Cabinet size | depends | SVS PB-1000 Pro is about 27% smaller by volume. In a subwoofer that is a real trade rather than a preference: box volume is how you get output low down without a bigger amplifier. |
| Warranty | B | SVS PB-1000 Pro carries 5 years on parts against 1 years. A subwoofer amplifier works harder than anything else in the system, so this is not a throwaway line. |
| Price | B | SVS PB-1000 Pro costs less - $799 against $949, about 16% less. |
A ELAC DS153 B SVS PB-1000 Pro
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
SVS PB-1000 Pro has the edge on paper, though not by much. The "depends" rows are more likely to decide this than the score is. Films or music? If this is mainly a home cinema, SVS PB-1000 Pro will hit harder for the money; if it is mainly for music in a normal-sized room, ELAC DS153 is usually the easier one to make sound right.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.