In this review, we will be comparing DS123 and KUBE 10b, two Powered Subwoofer speakers from ELAC and KEF. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of ELAC DS123 and KEF KUBE 10b first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both ELAC DS123and KEF KUBE 10b have a single woofer setup however the ELAC DS123's woofer is 12-inch whereas the KEF KUBE 10b features a 10-inch woofer.
Frequency Response
DS123 has a frequency range of 28-150 Hz whereas KUBE 10b has a frequency range of 24-140 Hz. With a minimum frequency of 24Hz, the KUBE 10b can go slightly deeper then the DS123's min frequency of 28Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare ELAC DS123's and KEF KUBE 10b's external dimensions. ELAC DS123 has external dimensions of 374.7 x 360.4 x 446.1mm () whereas KEF KUBE 10b has external dimensions of 372.0 x 356.0 x 397.0mm (14-5/8 x 14 x 15-5/8inch).
ELAC DS123 is clearly the larger of the two speakers. Its body is 4.4mm wider, 2.7mm taller and 49.1mm deeper than KEF KUBE 10b.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the ELAC DS123 is approximately 1607.7cm2 / 249.2inch2 and base area of the KEF KUBE 10b is approximately 1413.3cm2 / 219.1inch2. The DS123 requires 14% more surface area than the KUBE 10b which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The ELAC DS123 weighs 13.70kg / 30.1lbs and the KEF KUBE 10b weighs 17.50kg / 38.5lbs. This makes the KUBE 10b 28% heavier than the DS123.
Here is a comparison of how DS123 and KUBE 10b's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 Woofer Size |
12 inches
vs
10 inches
|
Larger woofer |
 High Frequency Response |
150 Hz
vs
140 Hz
|
Generates higher frequency |
 Price per pair* |
599USD
vs
750USD
|
costs less (*prices may change depending on the seller, location and time) |
| Low Frequency Response |
24 Hz
vs
28 Hz
|
Generates deeper bass |
 Height |
372mm
vs
374mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1413cm2
vs
1607cm2
|
Takes less floor space |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
ELAC DS123 needs about 14% more floor area. ELAC DS123 stands 49mm further into the room.
| General |
ELAC DS123 |
KEF KUBE 10b |
| Brand |
ELAC |
KEF |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Frequency Response |
28-150 Hz |
24-140 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
200-watt RMS |
300-watt RMS |
| Watts Peak (Max) |
400-watt RMS |
n/a |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
12" |
10" |
| Woofer Composition |
|
|
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
n/a |
40-140 Hz |
| Firing Direction |
n/a |
front |
Physical Specs |
|
|
| Height |
374.7mm (14.8") |
372.0mm (14.6") |
| Width |
360.4mm (14.2") |
356.0mm (14") |
| Depth |
446.1mm (17.6") |
397.0mm (15.6") |
| Weight |
13.70kg (30.1lbs) |
17.50kg (38.5lbs) |
| Enclosure |
|
Acoustic Suspension |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
1 Year |
2 Years |
| Labor Warranty |
1 Year |
2 Years |
No single best subwoofer here. Your room, where the box can physically go, and whether this is mainly for films or mainly for music will settle it long before the specs do.
| Area | Better | Why |
|---|
| Bass depth | B | KEF KUBE 10b goes deeper - 24Hz against 28Hz. A real difference, though most music has little content below 28Hz. |
| Amplifier power | B | KEF KUBE 10b has the bigger amplifier - 300W against 200W RMS, about 1.8dB more on tap. In a large room that is headroom before the DSP starts limiting. |
| Driver area | A | ELAC DS123 moves more air: 12" against 10" is 1.44x the cone area, not the 1.2x the diameters suggest. More area means the same output with less excursion, and less distortion with it. |
| Enclosure | evenly matched | Both are sealed designs, so they roll off in much the same way. |
| Warranty | B | KEF KUBE 10b carries 2 years on parts against 1 years. A subwoofer amplifier works harder than anything else in the system, so this is not a throwaway line. |
| Price | A | ELAC DS123 costs less - $599 against $750, about 20% less. |
A ELAC DS123 B KEF KUBE 10b
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
The usual trade-off: KEF KUBE 10b measures better, ELAC DS123 costs about 20% less. In a normal room, placement will make a bigger difference than the gap between these two.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.