In this review, we will be comparing Descend DN12 and KUBE 10b, two Powered Subwoofer speakers from Definitive Technology and KEF. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Definitive DN12 and KEF KUBE 10b first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the Definitive DN12 and KEF KUBE 10b compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both Definitive DN12and KEF KUBE 10b have a single woofer setup however the Definitive DN12's woofer is 12-inch whereas the KEF KUBE 10b features a 10-inch woofer.
Frequency Response
Descend DN12 has a frequency range of 25-150 Hz whereas KUBE 10b has a frequency range of 24-140 Hz. With a minimum frequency of 24Hz, the KUBE 10b can go slightly deeper then the Descend DN12's min frequency of 25Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The Definitive DN12 has a Passive Radiator type cabinet. Passive Radiator type subwoofers sports a non-powered cone that moves in response to the main woofer to move air out in order to generate stronger bass in a smaller body compared to ported or sealed designs. On the other hand the KEF KUBE 10b have Acoustic Suspension type enclosure. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Definitive DN12's and KEF KUBE 10b's external dimensions. Definitive DN12 has external dimensions of 488.0 x 459.0 x 512.0mm ( 19-3/16inch x 18-1/16inch x 20-1/8inch ) whereas KEF KUBE 10b has external dimensions of 372.0 x 356.0 x 397.0mm ( 14-5/8 x 14 x 15-5/8inch) .
Definitive DN12 is clearly the larger of the two speakers. Its body is 103mm wider, 116mm taller and 115mm deeper than KEF KUBE 10b.
Below you can see the front view size comparison of Definitive DN12 and KEF KUBE 10b in scale.
Comparison image of Definitive DN12 and KEF KUBE 10b Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Definitive DN12 is approximately 2350.1cm2 / 364.3inch2 and base area of the KEF KUBE 10b is approximately 1413.3cm2 / 219.1inch2. The Descend DN12 requires 66% more surface area than the KUBE 10b which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Definitive DN12 weighs 33.23kg / 73.1lbs and the KEF KUBE 10b weighs 17.50kg / 38.5lbs. This makes the Descend DN12 90% heavier than the KUBE 10b.
Here is a comparison of how Descend DN12 and KUBE 10b's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of Definitive DN12?
Here are the items that are included inside the box of Descend DN12:
Powered subwoofer6-feet AC power cordRemote controlCR2032 3V battery (pre-installed in remote)Owners Manual
What's in the Box of KEF KUBE 10b?
Here are the items that come with the KUBE 10b:
Powered subwoofer6.5-feet AC power cordSpeaker-level input blockUser ManualImportant Safety InformationWarranty Information
 Woofer Size |
12 inches
vs
10 inches
|
Larger woofer |
 High Frequency Response |
150k Hz
vs
140k Hz
|
Generates higher frequency |
 Passive Radiator |
2 x 12-inch
vs
None
|
Increases the bass performance |
| Low Frequency Response |
24 Hz
vs
25 Hz
|
Generates deeper bass |
 Height |
372mm
vs
488mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1413cm2 (356x397mm)
vs
2350cm2 (459x512mm)
|
Takes less floor space |
 Price per pair* |
750USD
vs
1199USD
|
costs less (*prices may change depending on the seller, location and time) |
 Wireless Operation |
Optional
vs
No
|
Connect your subwoofer to your system wireless |
| General |
Definitive Technology Descend DN12 |
KEF KUBE 10b |
| Brand |
Definitive Technology |
KEF |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
500 watts |
300 watts |
| Frequency Response |
25-150 Hz |
24-140 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
500-watt RMS |
300-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
12" |
10" |
| Woofer Composition |
Polypropylene |
Not given |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
n/a |
40-140 Hz |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
488.0mm (19.2") |
372.0mm (14.6") |
| Width |
459.0mm (18.1") |
356.0mm (14") |
| Depth |
512.0mm (20.2") |
397.0mm (15.6") |
| Weight |
33.23kg (73.1lbs) |
17.50kg (38.5lbs) |
| Enclosure |
Passive Radiator |
Acoustic Suspension |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
3 Years |
2 Years |
| Labor Warranty |
3 Years |
2 Years |