In this review, we will be comparing Sub V-16 F and RP-1200SW, two Powered Subwoofer speakers from DALI and Klipsch. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of DALI Sub V-16 F and Klipsch RP-1200SW first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both DALI Sub V-16 Fand Klipsch RP-1200SW have a single woofer setup however the DALI Sub V-16 F's woofer is 16-inch whereas the Klipsch RP-1200SW features a 12-inch woofer.
Frequency Response
Sub V-16 F has a frequency range of 19-200 Hz whereas RP-1200SW has a frequency range of 16.5-138 Hz. With a minimum frequency of 17Hz, the RP-1200SW can go slightly deeper then the Sub V-16 F's min frequency of 19Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
Both DALI Sub V-16 F and Klipsch RP-1200SW have Bass Reflex type cabinets. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare DALI Sub V-16 F's and Klipsch RP-1200SW's external dimensions. DALI Sub V-16 F has external dimensions of 590 x 560 x 650 mm () whereas Klipsch RP-1200SW has external dimensions of 482.0 x 432.0 x 659.0mm (18-15/16inch x 17inch x 25-15/16inch).
Klipsch RP-1200SW is 128mm narrower and 108mm shorter than DALI Sub V-16 F but it is also 9mm deeper.
Size, drawn to scale
Both speakers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same surface and pushed back to the same wall, so the deeper one visibly sticks out further.
DALI Sub V-16 F needs about 28% more floor or shelf area. DALI Sub V-16 F is 108mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the DALI Sub V-16 F is approximately 3640.0cm2 / 564.2inch2 and base area of the Klipsch RP-1200SW is approximately 2846.9cm2 / 441.3inch2. The Sub V-16 F requires 28% more surface area than the RP-1200SW which gives it a small disadvantage on placement in tight spaces.