In this review, we will be comparing BASIK SUB and ASW610, two Powered Subwoofer speakers from DALI and Bowers Wilkins. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of DALI BASIK SUB and B&W ASW610 first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both DALI BASIK SUBand B&W ASW610 have a single woofer setup however the DALI BASIK SUB's woofer is 8-inch whereas the B&W ASW610 features a 10-inch woofer.
Frequency Response
BASIK SUB has a frequency range of 33-200 Hz whereas ASW610 has a frequency range of 27-140 Hz. With a minimum frequency of 27Hz, the ASW610 can go significantly deeper on the low side and provide stronger bass compared to the BASIK SUB's min frequency of 33Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The DALI BASIK SUB has a Bass Reflex type cabinet. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs. On the other hand the B&W ASW610 have Acoustic Suspension type enclosure. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare DALI BASIK SUB's and B&W ASW610's external dimensions. DALI BASIK SUB has external dimensions of 319.0 x 295.0 x 310.0mm () whereas B&W ASW610 has external dimensions of 321.0 x 312.0 x 394.0mm (12-5/8 x 12-1/4 x 15-1/2inch).
B&W ASW610 is clearly the larger of the two speakers. Its body is 17mm wider, 2mm taller and 84mm deeper than DALI BASIK SUB.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the DALI BASIK SUB is approximately 914.5cm2 / 141.7inch2 and base area of the B&W ASW610 is approximately 1229.3cm2 / 190.5inch2. The BASIK SUB requires 26% less surface area than the ASW610 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The DALI BASIK SUB weighs 9.75kg / 21.5lbs and the B&W ASW610 weighs 12.55kg / 27.6lbs. This makes the ASW610 29% heavier than the BASIK SUB.
Here is a comparison of how BASIK SUB and ASW610's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 High Frequency Response |
200 Hz
vs
140 Hz
|
Generates higher frequency |
 Height |
319mm
vs
321mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
914cm2
vs
1229cm2
|
Takes less floor space |
 Price per pair* |
800USD
vs
899USD
|
costs less (*prices may change depending on the seller, location and time) |
 Driver Setup |
1-way
vs
-way
|
Have a dedicated mid-range driver |
 Woofer Size |
10 inches
vs
8 inches
|
Larger woofer |
| Low Frequency Response |
27 Hz
vs
33 Hz
|
Generates deeper bass |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
B&W ASW610 needs about 34% more floor area. B&W ASW610 stands 84mm further into the room.
| General |
DALI BASIK SUB |
Bowers & Wilkins ASW610 |
| Brand |
DALI |
Bowers Wilkins |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
170 watts |
200 watts |
| Frequency Response |
33-200 Hz |
27-140 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
170-watt RMS |
200-watt RMS |
| Watts Peak (Max) |
220-watt RMS |
n/a |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
8" |
10" |
| Woofer Composition |
Paper, long stroke |
Paper/Aramid Fiber |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
n/a |
front |
Physical Specs |
|
|
| Height |
319.0mm (12.6") |
321.0mm (12.6") |
| Width |
295.0mm (11.6") |
312.0mm (12.3") |
| Depth |
310.0mm (12.2") |
394.0mm (15.5") |
| Weight |
9.75kg (21.5lbs) |
12.55kg (27.6lbs) |
| Enclosure |
Bass Reflex |
Acoustic Suspension |
| Grille |
n/a |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
|
2 Years |
| Labor Warranty |
|
2 Years |
A ported subwoofer against a sealed one. That is the most consequential line on this page: it decides how the bass rolls off, how it behaves in a small room, and how much output you get for the size of the box.
| Area | Better | Why |
|---|
| Bass depth | B | B&W ASW610 goes deeper - 27Hz against 33Hz. A real difference, though most music has little content below 33Hz. |
| Amplifier power | evenly matched | Much the same amplifier (170W vs 200W RMS) - under 1dB apart. |
| Driver area | B | B&W ASW610 moves more air: 10" against 8" is 1.56x the cone area, not the 1.25x the diameters suggest. More area means the same output with less excursion, and less distortion with it. |
| Enclosure | depends | DALI BASIK SUB is ported - a ported box gives more output low down for its size, at the cost of a steeper roll-off below tuning; B&W ASW610 is sealed - a sealed box rolls off gently and is usually the easier one to integrate in a small or awkward room. Neither is better in the abstract; ported tends to suit films and sealed tends to suit music, and both generalisations have exceptions. |
| Driver placement | depends | DALI BASIK SUB fires down and B&W ASW610 fires front. A down-firing driver is more forgiving of a grille-less look and of a hard floor; a front-firing one is the safer choice on a thick carpet or a suspended timber floor. |
| Cabinet size | depends | DALI BASIK SUB is about 26% smaller by volume. In a subwoofer that is a real trade rather than a preference: box volume is how you get output low down without a bigger amplifier. |
| Price | A | DALI BASIK SUB costs less - $800 against $899, about 11% less. |
A DALI BASIK SUB B B&W ASW610
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
The usual trade-off: B&W ASW610 measures better, DALI BASIK SUB costs about 11% less. In a normal room, placement will make a bigger difference than the gap between these two. Films or music? If this is mainly a home cinema, DALI BASIK SUB will hit harder for the money; if it is mainly for music in a normal-sized room, B&W ASW610 is usually the easier one to make sound right.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.