In this review, we will be comparing Minx X301 and ASW608, two Powered Subwoofer speakers from Cambridge Audio and Bowers Wilkins. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Cambridge Audio Minx X301 and B&W ASW608 first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Cambridge Audio Minx X301and B&W ASW608 have the same driver set up: Both subwoofers have 1 x 8" drivers.
Frequency Response
Minx X301 has a frequency range of 31-200 Hz whereas ASW608 has a frequency range of 32-140 Hz. With a minimum frequency of 31Hz, the Minx X301 can go slightly deeper then the ASW608's min frequency of 32Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
Cambridge Audio Minx X301
High Frequency
Subwoofer Speakers
Cambridge Audio Minx X301
Cabinet Type
The Cambridge Audio Minx X301 has a Passive Radiator type cabinet. Passive Radiator type subwoofers sports a non-powered cone that moves in response to the main woofer to move air out in order to generate stronger bass in a smaller body compared to ported or sealed designs. On the other hand the B&W ASW608 have Acoustic Suspension type enclosure. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Cambridge Audio Minx X301's and B&W ASW608's external dimensions. Cambridge Audio Minx X301 has external dimensions of 312.0 x 267.0 x 310.0mm (12-1/4 x 10-1/2 x 12-3/16inch) whereas B&W ASW608 has external dimensions of 272.0 x 261.0 x 350.0mm (10-11/16 x 10-1/4 x 13-3/4inch).
B&W ASW608 is 6mm narrower and 40mm shorter than Cambridge Audio Minx X301 but it is also 40mm deeper.
Below you can see the front view size comparison of Cambridge Audio Minx X301 and B&W ASW608 in scale.
Comparison image of Cambridge Audio Minx X301 and B&W ASW608 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Cambridge Audio Minx X301 is approximately 827.7cm2 / 128.3inch2 and base area of the B&W ASW608 is approximately 913.5cm2 / 141.6inch2. The Minx X301 requires 9% less surface area than the ASW608 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Cambridge Audio Minx X301 weighs 7.50kg / 16.5lbs and the B&W ASW608 weighs 8.86kg / 19.5lbs. This makes the ASW608 18% heavier than the Minx X301.
Here is a comparison of how Minx X301 and ASW608's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
Cambridge Audio Minx X301
What's in the Box of Cambridge Audio Minx X301?
Here are the items that are included inside the box of Minx X301:
- Powered subwoofer
- Grille (installed)
- 6-feet AC power cord
- Installation Guide
- Important Safety Instructions
What's in the Box of B&W ASW608?
Here are the items that come with the ASW608:
- Powered subwoofer
- Grille
- 6.5-feet AC power cord
- 4 Rubber feet
- 4 Spike feet
- 4 Lock-nuts
- Manual
- Bowers & Wilkins brochure
- Warranty Information
 Low Frequency Response |
31 Hz
vs
32 Hz
|
Generates deeper bass |
 High Frequency Response |
200 Hz
vs
140 Hz
|
Generates higher frequency |
 Base Surface Area |
827cm2
vs
913cm2
|
Takes less floor space |
 Price per pair* |
549USD
vs
599USD
|
costs less (*prices may change depending on the seller, location and time) |
 Height |
272mm
vs
312mm
|
Easier to fit in smaller spaces |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
B&W ASW608 needs about 10% more floor area. B&W ASW608 stands 40mm further into the room. Cambridge Audio Minx X301 is 40mm taller.
| General |
Cambridge Audio Minx X301 |
Bowers & Wilkins ASW608 |
| Brand |
Cambridge Audio |
Bowers Wilkins |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
300 watts |
200 watts |
| Frequency Response |
31-200 Hz |
32-140 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
300-watt RMS |
200-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
8" |
8" |
| Woofer Composition |
Aluminum |
Paper/Aramid Fiber |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
312.0mm (12.3") |
272.0mm (10.7") |
| Width |
267.0mm (10.5") |
261.0mm (10.3") |
| Depth |
310.0mm (12.2") |
350.0mm (13.8") |
| Weight |
7.50kg (16.5lbs) |
8.86kg (19.5lbs) |
| Enclosure |
Passive Radiator |
Acoustic Suspension |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
3 Years |
2 Years |
| Labor Warranty |
3 Years |
2 Years |
A passive radiator subwoofer against a sealed one. That is the most consequential line on this page: it decides how the bass rolls off, how it behaves in a small room, and how much output you get for the size of the box.
| Area | Better | Why |
|---|
| Bass depth | evenly matched | Effectively the same reach (31Hz vs 32Hz). |
| Amplifier power | A | Cambridge Audio Minx X301 has the bigger amplifier - 300W against 200W RMS, about 1.8dB more on tap. In a large room that is headroom before the DSP starts limiting. |
| Driver area | evenly matched | Near-identical radiating area (8" against 8"). |
| Enclosure | depends | Cambridge Audio Minx X301 is passive radiator - a passive radiator behaves like a port without the pipe noise, and suits a slim cabinet; B&W ASW608 is sealed - a sealed box rolls off gently and is usually the easier one to integrate in a small or awkward room. Neither is better in the abstract; ported tends to suit films and sealed tends to suit music, and both generalisations have exceptions. |
| Speaker-level inputs | B | B&W ASW608 takes a speaker-level connection as well as line level. That is what lets it work with an integrated amplifier or a vintage receiver that has no subwoofer output at all. |
| Warranty | A | Cambridge Audio Minx X301 carries 3 years on parts against 2 years. A subwoofer amplifier works harder than anything else in the system, so this is not a throwaway line. |
| Price | A | Cambridge Audio Minx X301 costs less - $549 against $599, about 8% less. |
A Cambridge Audio Minx X301 B B&W ASW608
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
Cambridge Audio Minx X301 has the edge on paper, though not by much. The "depends" rows are more likely to decide this than the score is. Films or music? If this is mainly a home cinema, Cambridge Audio Minx X301 will hit harder for the money; if it is mainly for music in a normal-sized room, B&W ASW608 is usually the easier one to make sound right. Check your amplifier first: if it has no subwoofer or preamp output, B&W ASW608 is the only one of these two you can connect at all.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.