In this review, we will be comparing SUB10 and ASW610, two Powered Subwoofer speakers from Buchardt and Bowers Wilkins. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Buchardt SUB10 and B&W ASW610 first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Buchardt SUB10and B&W ASW610 have the same driver set up: Both subwoofers have 1 x 10" drivers.
Frequency Response
SUB10 has a frequency range of 20-300 Hz whereas ASW610 has a frequency range of 27-140 Hz. With a minimum frequency of 20Hz, the SUB10 can go significantly deeper on the low side and provide stronger bass compared to the ASW610's min frequency of 27Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
Both Buchardt SUB10 and B&W ASW610 have Acoustic Suspension type cabinets. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Buchardt SUB10's and B&W ASW610's external dimensions. Buchardt SUB10 has external dimensions of 490 x 320 x 160 mm (19.3 x 12.6 x 6.3 inch) whereas B&W ASW610 has external dimensions of 321.0 x 312.0 x 394.0mm (12-5/8 x 12-1/4 x 15-1/2inch).
B&W ASW610 is 8mm narrower and 169mm shorter than Buchardt SUB10 but it is also 234mm deeper.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Buchardt SUB10 is approximately 512.0cm2 / 79.4inch2 and base area of the B&W ASW610 is approximately 1229.3cm2 / 190.5inch2. The SUB10 requires 58% less surface area than the ASW610 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Buchardt SUB10 weighs 14.00kg / 30.8lbs and the B&W ASW610 weighs 12.55kg / 27.6lbs. This makes the SUB10 12% heavier than the ASW610.
Here is a comparison of how SUB10 and ASW610's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 Low Frequency Response |
20 Hz
vs
27 Hz
|
Generates deeper bass |
 High Frequency Response |
300 Hz
vs
140 Hz
|
Generates higher frequency |
 App-Based Control |
Yes
vs
None
|
Control the speaker via an app |
 Base Surface Area |
512cm2
vs
1229cm2
|
Takes less floor space |
 Wireless Operation |
Yes
vs
No
|
Connect your subwoofer to your system wireless |
 Height |
321mm
vs
490mm
|
Easier to fit in smaller spaces |
 Price per pair* |
899USD
vs
1300USD
|
costs less (*prices may change depending on the seller, location and time) |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
B&W ASW610 needs about 140% more floor area. B&W ASW610 stands 234mm further into the room. Buchardt SUB10 is 169mm taller.
| General |
Buchardt SUB10 |
Bowers & Wilkins ASW610 |
| Brand |
Buchardt |
Bowers Wilkins |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
400 watts |
200 watts |
| Frequency Response |
20-300 Hz |
27-140 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
400-watt RMS |
200-watt RMS |
| Watts Peak (Max) |
1200-watt RMS |
n/a |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
10" |
10" |
| Woofer Composition |
|
Paper/Aramid Fiber |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
n/a |
front |
Physical Specs |
|
|
| Height |
490.0mm (19.3") |
321.0mm (12.6") |
| Width |
320.0mm (12.6") |
312.0mm (12.3") |
| Depth |
160.0mm (6.3") |
394.0mm (15.5") |
| Weight |
14.00kg (30.8lbs) |
12.55kg (27.6lbs) |
| Enclosure |
Acoustic Suspension |
Acoustic Suspension |
| Finish |
MDF |
n/a |
| Available Colors |
Black,White |
n/a |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
5 years on woofer and cabinet, 2 years on amp module |
2 Years |
| Labor Warranty |
|
2 Years |
No single best subwoofer here. Your room, where the box can physically go, and whether this is mainly for films or mainly for music will settle it long before the specs do.
| Area | Better | Why |
|---|
| Bass depth | A | Buchardt SUB10 goes deeper - 20Hz against 27Hz. Under 20Hz is felt more than heard - the bottom of a pipe organ and the bottom of a film mix. |
| Amplifier power | A | Buchardt SUB10 has the bigger amplifier - 400W against 200W RMS, about 3dB more on tap. In a large room that is headroom before the DSP starts limiting. |
| Driver area | evenly matched | Near-identical radiating area (10" against 10"). |
| Enclosure | evenly matched | Both are sealed designs, so they roll off in much the same way. |
| Wireless option | depends | Only Buchardt SUB10 offers a wireless link. It decides where the sub can go if you cannot run a cable, and is worth nothing if you can. |
| Cabinet size | depends | Buchardt SUB10 is about 36% smaller by volume. In a subwoofer that is a real trade rather than a preference: box volume is how you get output low down without a bigger amplifier. |
| Warranty | A | Buchardt SUB10 carries 5 years on parts against 2 years. A subwoofer amplifier works harder than anything else in the system, so this is not a throwaway line. |
| Price | B | B&W ASW610 costs less - $899 against $1,300, about 31% less. |
A Buchardt SUB10 B B&W ASW610
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
The usual trade-off: Buchardt SUB10 measures better, B&W ASW610 costs about 31% less. In a normal room, placement will make a bigger difference than the gap between these two. If placement is the constraint - a corner, behind a sofa, under a desk - Buchardt SUB10 is the one that will actually go there, and a well-placed small subwoofer beats a badly-placed big one every time.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.