In this review, we will be comparing DB2D and Monitor XT12, two Powered Subwoofer speakers from Bowers Wilkins and Polk Audio. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of B&W DB2D and Polk Monitor XT12 first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.B&W DB2D and Polk Monitor XT12 have a totally different setup: the B&W DB2D features 2 x 10-inch drivers whereas the Monitor XT12 features 1 x 12-inch drivers.
Frequency Response
DB2D has a frequency range of 10-350 Hz whereas Monitor XT12 has a frequency range of 24-160 Hz. With a minimum frequency of 10Hz, the DB2D can go significantly deeper on the low side and provide stronger bass compared to the Monitor XT12's min frequency of 24Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The B&W DB2D has a Acoustic Suspension type cabinet. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs. On the other hand the Polk Monitor XT12 have Bass Reflex type enclosure. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare B&W DB2D's and Polk Monitor XT12's external dimensions. B&W DB2D has external dimensions of 386.0 x 431.0 x 410.0mm (15-3/16inch x 16-15/16inch x 16-1/8inch) whereas Polk Monitor XT12 has external dimensions of 418.0 x 408.0 x 485.0mm (16-7/16inch x 16-1/16inch x 19-1/16inch).
B&W DB2D is 32mm shorter and 75mm less deeper than Polk Monitor XT12 but it is also 23mm wider.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the B&W DB2D is approximately 1767.1cm2 / 273.9inch2 and base area of the Polk Monitor XT12 is approximately 1978.8cm2 / 306.7inch2. The DB2D requires 11% less surface area than the Monitor XT12 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The B&W DB2D weighs 36.09kg / 79.4lbs and the Polk Monitor XT12 weighs 17.73kg / 39lbs. This makes the DB2D 104% heavier than the Monitor XT12.
Here is a comparison of how DB2D and Monitor XT12's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of B&W DB2D?
Here are the items that are included inside the box of DB2D:
- Powered subwoofer
- 2 Grilles
- 6.5-feet AC power cord
- 4 Decoupling feet
- 4 Rubber feet
- 4 Spike feet
- 4 Lock-nuts
- Cleaning cloth
- Quickstart Guide
- Bowers & Wilkins brochure
- Warranty Information
- Cleaning cloth instructions
What's in the Box of Polk Monitor XT12?
Here are the items that come with the Monitor XT12:
- Black powered subwoofer
- 6.5-feet AC power cord
- Grille
- Owners Manual
- Online registration card
 Number of Woofers |
2
vs
1
|
More woofers |
| Low Frequency Response |
10 Hz
vs
24 Hz
|
Generates deeper bass |
 High Frequency Response |
350 Hz
vs
160 Hz
|
Generates higher frequency |
 Height |
386mm
vs
418mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1767cm2
vs
1978cm2
|
Takes less floor space |
| Woofer Size |
12 inches
vs
10 inches
|
Larger woofer |
 Price per pair* |
399USD
vs
4499USD
|
costs less (*prices may change depending on the seller, location and time) |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
Polk Monitor XT12 needs about 12% more floor area. Polk Monitor XT12 stands 75mm further into the room. Polk Monitor XT12 is 32mm taller.
| General |
Bowers & Wilkins DB2D |
Polk Monitor XT12 |
| Brand |
Bowers Wilkins |
Polk Audio |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
1000 watts |
50 watts |
| Frequency Response |
10-350 Hz |
24-160 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
1000-watt RMS |
50-watt RMS |
Drivers |
|
|
| Woofer Quantity |
2 |
1 |
| Woofer Size |
10" |
12" |
| Woofer Composition |
Aerofoil |
Bi-laminate paper |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
386.0mm (15.2") |
418.0mm (16.5") |
| Width |
431.0mm (17") |
408.0mm (16.1") |
| Depth |
410.0mm (16.1") |
485.0mm (19.1") |
| Weight |
36.09kg (79.4lbs) |
17.73kg (39lbs) |
| Enclosure |
Acoustic Suspension |
Bass Reflex |
| Available Colors |
Gloss Black,Satin White |
n/a |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
2 Years |
3 Years |
| Labor Warranty |
2 Years |
3 Years |
A sealed subwoofer against a ported one. That is the most consequential line on this page: it decides how the bass rolls off, how it behaves in a small room, and how much output you get for the size of the box.
| Area | Better | Why |
|---|
| Bass depth | A | B&W DB2D goes deeper - 10Hz against 24Hz. Under 20Hz is felt more than heard - the bottom of a pipe organ and the bottom of a film mix. |
| Amplifier power | A | B&W DB2D has the bigger amplifier - 1000W against 50W RMS, about 13dB more on tap. In a large room that is headroom before the DSP starts limiting. |
| Driver area | A | B&W DB2D moves more air: 2 x 10" against 12" is 1.39x the cone area, not the 1.18x the diameters suggest. More area means the same output with less excursion, and less distortion with it. |
| Enclosure | depends | B&W DB2D is sealed - a sealed box rolls off gently and is usually the easier one to integrate in a small or awkward room; Polk Monitor XT12 is ported - a ported box gives more output low down for its size, at the cost of a steeper roll-off below tuning. Neither is better in the abstract; ported tends to suit films and sealed tends to suit music, and both generalisations have exceptions. |
| Speaker-level inputs | B | Polk Monitor XT12 takes a speaker-level connection as well as line level. That is what lets it work with an integrated amplifier or a vintage receiver that has no subwoofer output at all. |
| Driver placement | depends | B&W DB2D fires side and Polk Monitor XT12 fires front. A down-firing driver is more forgiving of a grille-less look and of a hard floor; a front-firing one is the safer choice on a thick carpet or a suspended timber floor. |
| Cabinet size | depends | B&W DB2D is about 18% smaller by volume. In a subwoofer that is a real trade rather than a preference: box volume is how you get output low down without a bigger amplifier. |
| Warranty | B | Polk Monitor XT12 carries 3 years on parts against 2 years. A subwoofer amplifier works harder than anything else in the system, so this is not a throwaway line. |
| Price | B | Polk Monitor XT12 costs less - $399 against $4,499, about 91% less. |
A B&W DB2D B Polk Monitor XT12
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
B&W DB2D is ahead, but on only 1 of the measured areas, and it costs about 11.3x the price. Polk Monitor XT12 is the sensible buy unless your room is large enough to need the extra. Films or music? If this is mainly a home cinema, Polk Monitor XT12 will hit harder for the money; if it is mainly for music in a normal-sized room, B&W DB2D is usually the easier one to make sound right. Check your amplifier first: if it has no subwoofer or preamp output, Polk Monitor XT12 is the only one of these two you can connect at all.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.