In this review, we will be comparing PULSE SUB and ASW610, two Powered Subwoofer speakers from Bluesound and Bowers Wilkins. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Bluesound PULSE SUB and B&W ASW610 first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Bluesound PULSE SUB and B&W ASW610 have a totally different setup: the Bluesound PULSE SUB features 2 x 6.5-inch drivers whereas the ASW610 features 1 x 10-inch drivers.
Frequency Response
PULSE SUB has a frequency range of whereas ASW610 has a frequency range of 27-140 Hz. With a minimum frequency of Hz, the PULSE SUB can go significantly deeper on the low side and provide stronger bass compared to the ASW610's min frequency of 27Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Bluesound PULSE SUB's and B&W ASW610's external dimensions. Bluesound PULSE SUB has external dimensions of 330 x 292 x 315 mm () whereas B&W ASW610 has external dimensions of 321.0 x 312.0 x 394.0mm (12-5/8 x 12-1/4 x 15-1/2inch).
Bluesound PULSE SUB is 20mm narrower and 79mm less deeper than B&W ASW610 but it is also 9mm taller.
Size, drawn to scale
Both speakers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same surface and pushed back to the same wall, so the deeper one visibly sticks out further.
B&W ASW610 needs about 34% more floor or shelf area. B&W ASW610 is 79mm deeper, so it stands that much further out from the wall.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Bluesound PULSE SUB is approximately 919.8cm2 / 142.6inch2 and base area of the B&W ASW610 is approximately 1229.3cm2 / 190.5inch2. The PULSE SUB requires 25% less surface area than the ASW610 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Bluesound PULSE SUB weighs 10.00kg / 22lbs and the B&W ASW610 weighs 12.55kg / 27.6lbs. This makes the ASW610 26% heavier than the PULSE SUB.
Here is a comparison of how PULSE SUB and ASW610's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 Number of Woofers |
2
vs
1
|
More woofers |
| Low Frequency Response |
Hz
vs
27 Hz
|
Generates deeper bass |
 App-Based Control |
BluOS Controller (iOS, Android, Windows, macOS)
vs
None
|
Control the speaker via an app |
 Base Surface Area |
919cm2
vs
1229cm2
|
Takes less floor space |
 Ethernet Connection |
Yes
vs
No
|
High quality streaming over Ethernet |
 Wireless Operation |
Yes
vs
No
|
Connect your subwoofer to your system wireless |
| Woofer Size |
10 inches
vs
6.5 inches
|
Larger woofer |
 High Frequency Response |
140 Hz
vs
Hz
|
Generates higher frequency |
 Height |
321mm
vs
330mm
|
Easier to fit in smaller spaces |
 Price per pair* |
899USD
vs
1299USD
|
costs less (*prices may change depending on the seller, location and time) |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
B&W ASW610 needs about 34% more floor area. B&W ASW610 stands 79mm further into the room.
| General |
Bluesound PULSE SUB |
Bowers & Wilkins ASW610 |
| Brand |
Bluesound |
Bowers Wilkins |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Frequency Response |
|
27-140 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
350-watt RMS |
200-watt RMS |
Drivers |
|
|
| Woofer Quantity |
2 |
1 |
| Woofer Size |
6.5" |
10" |
| Woofer Composition |
|
Paper/Aramid Fiber |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
n/a |
front |
Physical Specs |
|
|
| Height |
330.0mm (13") |
321.0mm (12.6") |
| Width |
292.0mm (11.5") |
312.0mm (12.3") |
| Depth |
315.0mm (12.4") |
394.0mm (15.5") |
| Weight |
10.00kg (22lbs) |
12.55kg (27.6lbs) |
| Enclosure |
|
Acoustic Suspension |
| Finish |
Matte satin paint |
n/a |
| Available Colors |
Black, White/Tan |
n/a |
| Grille |
Removable magnetic |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Ethernet Port |
Yes |
n/a |
Other |
|
|
| Parts Warranty |
|
2 Years |
| Labor Warranty |
|
2 Years |
No single best subwoofer here. Your room, where the box can physically go, and whether this is mainly for films or mainly for music will settle it long before the specs do.
| Area | Better | Why |
|---|
| Amplifier power | A | Bluesound PULSE SUB has the bigger amplifier - 350W against 200W RMS, about 2.4dB more on tap. In a large room that is headroom before the DSP starts limiting. |
| Driver area | evenly matched | Near-identical radiating area (2 x 6.5" against 10"). |
| Wireless option | depends | Only Bluesound PULSE SUB offers a wireless link. It decides where the sub can go if you cannot run a cable, and is worth nothing if you can. |
| Cabinet size | depends | Bluesound PULSE SUB is about 23% smaller by volume. In a subwoofer that is a real trade rather than a preference: box volume is how you get output low down without a bigger amplifier. |
| Price | B | B&W ASW610 costs less - $899 against $1,299, about 31% less. |
A Bluesound PULSE SUB B B&W ASW610
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
Bluesound PULSE SUB is ahead, but on only 1 of the measured areas, and it costs about 44% more. B&W ASW610 is the sensible buy unless your room is large enough to need the extra.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.