In this review, we will be comparing S6 and ASW608, two Powered Subwoofer speakers from Audioengine and Bowers Wilkins. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Audioengine S6 and B&W ASW608 first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both Audioengine S6and B&W ASW608 have a single woofer setup however the Audioengine S6's woofer is 6-inch whereas the B&W ASW608 features a 8-inch woofer.
Frequency Response
S6 has a frequency range of 33-132 Hz whereas ASW608 has a frequency range of 32-140 Hz. With a minimum frequency of 32Hz, the ASW608 can go slightly deeper then the S6's min frequency of 33Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
Both Audioengine S6 and B&W ASW608 have Acoustic Suspension type cabinets. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Audioengine S6's and B&W ASW608's external dimensions. Audioengine S6 has external dimensions of 250.0 x 221.0 x 281.0mm (9-13/16inch x 8-11/16inch x 11-1/16inch) whereas B&W ASW608 has external dimensions of 272.0 x 261.0 x 350.0mm (10-11/16 x 10-1/4 x 13-3/4inch).
B&W ASW608 is clearly the larger of the two speakers. Its body is 40mm wider, 22mm taller and 69mm deeper than Audioengine S6.
Size, drawn to scale
Both speakers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same surface and pushed back to the same wall, so the deeper one visibly sticks out further.
B&W ASW608 needs about 47% more floor or shelf area. B&W ASW608 is 69mm deeper, so it stands that much further out from the wall. B&W ASW608 is 22mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Audioengine S6 is approximately 621.0cm2 / 96.3inch2 and base area of the B&W ASW608 is approximately 913.5cm2 / 141.6inch2. The S6 requires 32% less surface area than the ASW608 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Audioengine S6 weighs 7.00kg / 15.4lbs and the B&W ASW608 weighs 8.86kg / 19.5lbs. This makes the ASW608 27% heavier than the S6.
Here is a comparison of how S6 and ASW608's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of Audioengine S6?
Here are the items that are included inside the box of S6:
- Powered subwoofer
- Grille
- 6-feet AC power cord
- 6.5-feet Stereo RCA cable
- 6.5-feet Stereo minijack audio cable
- Cloth subwoofer bag
- Cloth cable bag
- Quick Start Guide
- Audioengine brochure
What's in the Box of B&W ASW608?
Here are the items that come with the ASW608:
- Powered subwoofer
- Grille
- 6.5-feet AC power cord
- 4 Rubber feet
- 4 Spike feet
- 4 Lock-nuts
- Manual
- Bowers & Wilkins brochure
- Warranty Information
 Height |
250mm
vs
272mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
621cm2
vs
913cm2
|
Takes less floor space |
 Price per pair* |
299USD
vs
599USD
|
costs less (*prices may change depending on the seller, location and time) |
 Wireless Operation |
Optional
vs
No
|
Connect your subwoofer to your system wireless |
 Woofer Size |
8 inches
vs
6 inches
|
Larger woofer |
| Low Frequency Response |
32 Hz
vs
33 Hz
|
Generates deeper bass |
 High Frequency Response |
140 Hz
vs
132 Hz
|
Generates higher frequency |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
B&W ASW608 needs about 47% more floor area. B&W ASW608 stands 69mm further into the room. B&W ASW608 is 22mm taller.
| General |
Audioengine S6 |
Bowers & Wilkins ASW608 |
| Brand |
Audioengine |
Bowers Wilkins |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
140 watts |
200 watts |
| Frequency Response |
33-132 Hz |
32-140 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
140-watt RMS |
200-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
6" |
8" |
| Woofer Composition |
Treated paper |
Paper/Aramid Fiber |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
250.0mm (9.8") |
272.0mm (10.7") |
| Width |
221.0mm (8.7") |
261.0mm (10.3") |
| Depth |
281.0mm (11.1") |
350.0mm (13.8") |
| Weight |
7.00kg (15.4lbs) |
8.86kg (19.5lbs) |
| Enclosure |
Acoustic Suspension |
Acoustic Suspension |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
3 Years |
2 Years |
| Labor Warranty |
3 Years |
2 Years |
Two quite different sizes of subwoofer. Room volume decides this more than anything else on the page: a big driver in a small room is wasted, and a small one in a large room is worked to death.
| Area | Better | Why |
|---|
| Bass depth | evenly matched | Effectively the same reach (33Hz vs 32Hz). |
| Amplifier power | B | B&W ASW608 has the bigger amplifier - 200W against 140W RMS, about 1.5dB more on tap. In a large room that is headroom before the DSP starts limiting. |
| Driver area | B | B&W ASW608 moves more air: 8" against 6" is 1.78x the cone area, not the 1.33x the diameters suggest. More area means the same output with less excursion, and less distortion with it. |
| Enclosure | evenly matched | Both are sealed designs, so they roll off in much the same way. |
| Speaker-level inputs | B | B&W ASW608 takes a speaker-level connection as well as line level. That is what lets it work with an integrated amplifier or a vintage receiver that has no subwoofer output at all. |
| Wireless option | depends | Only Audioengine S6 offers a wireless link (as a paid option). It decides where the sub can go if you cannot run a cable, and is worth nothing if you can. |
| Cabinet size | depends | Audioengine S6 is about 38% smaller by volume. In a subwoofer that is a real trade rather than a preference: box volume is how you get output low down without a bigger amplifier. |
| Warranty | A | Audioengine S6 carries 3 years on parts against 2 years. A subwoofer amplifier works harder than anything else in the system, so this is not a throwaway line. |
| Price | A | Audioengine S6 costs less - $299 against $599, about 50% less. |
A Audioengine S6 B B&W ASW608
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
The usual trade-off: B&W ASW608 measures better, Audioengine S6 costs about 50% less. In a normal room, placement will make a bigger difference than the gap between these two. Check your amplifier first: if it has no subwoofer or preamp output, B&W ASW608 is the only one of these two you can connect at all. Two small subwoofers beat one big one in most rooms - a pair evens out the room modes in a way no single box can, whatever its specs. At $299 each, two Audioengine S6 cost about $598 against $599 for one of the other, which is worth a thought.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.