In this review, we will be comparing Bravus II 10D 500W 10" Powered Subwoofer and PB-1000 Pro, two Powered Subwoofer speakers from Aperion and SVS. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Aperion Bravus II 10D 500W 10" Powered Subwoofer and SVS PB-1000 Pro first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking through our links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both Aperion Bravus II 10D 500W 10" Powered Subwooferand SVS PB-1000 Pro have a single woofer setup however the Aperion Bravus II 10D 500W 10" Powered Subwoofer's woofer is 10-inch whereas the SVS PB-1000 Pro features a 12-inch woofer.
Frequency Response
Bravus II 10D 500W 10" Powered Subwoofer has a frequency range of 28-350 Hz whereas PB-1000 Pro has a frequency range of 17-260 Hz. With a minimum frequency of 17Hz, the PB-1000 Pro can go significantly deeper on the low side and provide stronger bass compared to the Bravus II 10D 500W 10" Powered Subwoofer's min frequency of 28Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
Aperion Bravus II 10D 500W 10" Powered Subwoofer
High Frequency
Subwoofer Speakers
Aperion Bravus II 10D 500W 10" Powered Subwoofer
Cabinet Type
The Aperion Bravus II 10D 500W 10" Powered Subwoofer has a Acoustic Suspension type cabinet. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs. On the other hand the SVS PB-1000 Pro have Bass Reflex type enclosure. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Aperion Bravus II 10D 500W 10" Powered Subwoofer's and SVS PB-1000 Pro's external dimensions. Aperion Bravus II 10D 500W 10" Powered Subwoofer has external dimensions of 381.0 x 342.9 x 342.9mm (15 x 13.5 x 13.5inch) whereas SVS PB-1000 Pro has external dimensions of 479.0 x 380.0 x 509.0mm (18-13/16inch x 15inch x 20-15/16inch).
SVS PB-1000 Pro is clearly the larger of the two speakers. Its body is 37.1mm wider, 98mm taller and 166.1mm deeper than Aperion Bravus II 10D 500W 10" Powered Subwoofer.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Aperion Bravus II 10D 500W 10" Powered Subwoofer is approximately 1175.8cm2 / 182.2inch2 and base area of the SVS PB-1000 Pro is approximately 1934.2cm2 / 299.8inch2. The Bravus II 10D 500W 10" Powered Subwoofer requires 39% less surface area than the PB-1000 Pro which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Aperion Bravus II 10D 500W 10" Powered Subwoofer weighs 17.24kg / 37.9lbs and the SVS PB-1000 Pro weighs 19.30kg / 42.5lbs. This makes the PB-1000 Pro 12% heavier than the Bravus II 10D 500W 10" Powered Subwoofer.
Here is a comparison of how Bravus II 10D 500W 10" Powered Subwoofer and PB-1000 Pro's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
Aperion Bravus II 10D 500W 10" Powered Subwoofer
 High Frequency Response |
350k Hz
vs
260k Hz
|
Generates higher frequency |
 Height |
381mm
vs
479mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1175cm2
vs
1934cm2
|
Takes less floor space |
 Woofer Size |
12 inches
vs
10 inches
|
Larger woofer |
| Low Frequency Response |
17 Hz
vs
28 Hz
|
Generates deeper bass |
 App-Based Control |
iOS,Android
vs
None
|
Control the speaker via an app |
 Price per pair* |
799USD
vs
899USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Aperion Bravus II 10D 500W 10" Powered Subwoofer |
SVS PB-1000 Pro |
| Brand |
Aperion |
SVS |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
500 watts |
325 watts |
| Impedance |
4 ohms |
n/a |
| Frequency Response |
28-350 Hz |
17-260 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
500-watt RMS |
325-watt RMS |
| Watts Peak (Max) |
n/a |
820-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
10" |
12" |
| Woofer Composition |
|
Fiber-composite |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
n/a |
front |
Physical Specs |
|
|
| Height |
381.0mm (15") |
479.0mm (18.9") |
| Width |
342.9mm (13.5") |
380.0mm (15") |
| Depth |
342.9mm (13.5") |
509.0mm (20") |
| Weight |
17.24kg (37.9lbs) |
19.30kg (42.5lbs) |
| Enclosure |
Acoustic Suspension |
Bass Reflex |
| Available Colors |
n/a |
Black |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
|
5 Years |
| Labor Warranty |
|
5 Years |