In this review, we will be comparing M106 and Bronze 2, two Passive Bookshelf speakers from Revel and Monitor Audio.
Let's have a brief look at the main features
of Revel M106 and Monitor Audio Bronze 2 first before getting into our more
detailed comparison.
Revel M106 Key Specs
- 2-way Design
- 1" Hard-Dome with Acoustic Lens Waveguide Tweeter
- 6.5" Aluminum Woofer
- 59Hz- 20kHz Frequency Response
- 87 dB Sensitivity
- Impedance: 8ohms
- Power Range:50-150watts
- Weight:8.41kg
- Dimensions (H x W x D): 383.0" x 8-1/4" x 11"( 383.0 x 210.0 x 280.0mm )
Monitor Audio Bronze 2 Key Specs
- 2-way Design
- 1" Dome Tweeter
- 6.5" C-CAM Woofer
- 42-30k Hz Frequency Response
- 90 dB Sensitivity
- Impedance: 8ohms
- Power Range:30-100watts
- Weight:5.30kg
- Dimensions (H x W x D): 350.0" x 7.2" x 11.0"( 350.0 x 185.0 x 281.0mm )
What size room are the Revel M106 and Monitor Audio Bronze 2 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Revel M106 |
Monitor Audio Bronze 2 |
| Near-field |
Poor |
Average |
| Small Room |
Average |
Good |
| Mid-size Room |
Good |
Average |
| Large Room |
Average |
Poor |
| Very Large Room |
Poor |
Bad |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Revel M106 and Monitor Audio Bronze 2 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both M106 and Bronze 2 are 2-way speakers.
| Driver |
Revel M106 |
Monitor Audio Bronze 2 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 6.5-inch
|
1 x 6.5-inch
|
M106 features a 1" aluminum Hard-Dome with Acoustic Lens Waveguide Tweeter and 1 x 6.5" Aluminum Woofer with a Crossover frequency at 2300Hz. On the other hand, the Bronze 2 features a 1" Dome Tweeter and 1 x 6.5" C-CAM Woofer with a Crossover frequency at 3100Hz.
Frequency Response
M106 has a frequency range of 59Hz- 20kHz whereas Bronze 2 has a frequency range of 42-30k Hz. With a minimum frequency of 42Hz, the Bronze 2 can go significantly deeper on the low side and provide stronger bass compared to the M106's min frequency of 59Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
M106 and Bronze 2 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. M106 sensitivity is rated at 87 dB and the Bronze 2's is at 90 dB. This 3 dB difference makes the Monitor Audio Bronze 2 a more sensitive speaker compared to Revel M106, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
M106 can handle a max power of 150 watts RMS from the amp the whereas Bronze 2 has a max power handling value of 100 watts RMS, 50 watts less than the M106.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Bronze 2 features Post posts which make bi-amping or bi-wiring possible. M106 has a Binding post which doesn't feature bi-amping/bi-wiring.
Revel M106's Binding post terminals
Cabinet Type and Port Position
M106 has a rear firing port whereas Bronze 2 has a front firing ports. Monitor Audio Bronze 2's front-firing port gives more flexibility in placement in regards to proximity to walls compared to Revel M106 with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Revel M106's and Monitor Audio Bronze 2's external dimensions. Revel M106 has external dimensions of 383.0 x 210.0 x 280.0mm ( 15-1/16 x 8-1/4 x 11inch) whereas Monitor Audio Bronze 2 has external dimensions of 350.0 x 185.0 x 281.0mm ( 13.7 x 7.2 x 11.0inch) .
Monitor Audio Bronze 2 is 25mm narrower and 33mm shorter than Revel M106 but it is also 1mm deeper.
Below you can see the front view size comparison of Revel M106 and Monitor Audio Bronze 2 in scale.
Comparison image of Revel M106 and Monitor Audio Bronze 2 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Revel M106 is approximately 588.0cm2 / 91.1inch2 and base area of the Monitor Audio Bronze 2 is approximately 519.9cm2 / 80.6inch2. The M106 requires 13% more surface area than the Bronze 2 which gives it a small disadvantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Size Comparison image of Revel M106 and Monitor Audio Bronze 2 on a Media Console
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Revel M106 weighs 8.41kg / 18.5lbs and the Monitor Audio Bronze 2 weighs 5.30kg / 11.7lbs. This makes the M106 59% heavier than the Bronze 2.
Here is a comparison of how M106 and Bronze 2's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Revel M106?
Here are the items that are included inside the box of M106:
Bookshelf loudspeakerGrilleFoam port plugOwners Manual
What's in the Box of Monitor Audio Bronze 2?
Here are the items that come with the Bronze 2:
2 Bookshelf loudspeakers 2 Grilles 2 Foam port plugs Hex-key Owner's Manual Important Safety Instructions
 Max Input Power |
150 watts
vs
100 watts
|
Handle more power from your amplifier |
 Sensitivity |
90 dB
vs
87 dB
|
Play louder with same amount of amplification power |
 Low Frequency Response |
42 Hz
vs
59 Hz
|
Generates deeper bass |
 High Frequency Response |
30k Hz
vs
20k Hz
|
Generates higher frequency |
 Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
 Port Position |
Front
vs
Rear
|
Gives more flexibility placing close to walls |
 Height |
350mm
vs
383mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
519cm2
vs
588cm2
|
Takes less floor space |
| General |
Revel Performa3 M106 |
Monitor Audio Bronze 2 |
| Brand |
Revel |
Monitor Audio |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
50-150 watts |
30-100 watts |
| Sensitivity |
87 dB |
90 dB |
| Impedance |
8 ohms |
8 ohms |
| Frequency Response |
59Hz- 20kHz |
42-30k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
6.5" |
6.5" |
| Woofer Composition |
Aluminum |
C-CAM |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Hard-Dome with Acoustic Lens Waveguide |
Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
2300Hz |
3100Hz |
| Firing Direction |
rear |
front |
Physical Specs |
|
|
| Height |
383.0mm (15.1") |
350.0mm (13.8") |
| Width |
210.0mm (8.3") |
185.0mm (7.3") |
| Depth |
280.0mm (11") |
281.0mm (11.1") |
| Weight |
8.41kg (18.5lbs) |
5.30kg (11.7lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
Wood/Lacquer |
MDF/Wood-grain vinyl |
| Available Colors |
Gloss Walnut,Piano Black |
Walnut, White, Rosemah, Black |
| Mounting Bracket |
No |
No |
| Recommended Stand Height |
24-25" |
30-31" |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |