In this review, we will be comparing 3020i and R-41M, two Passive Bookshelf speakers from Q Acoustics and Klipsch. Let's have a brief look at the main features
of Q Acoustics 3020i and Klipsch R-41M first before getting into our more
detailed comparison.
What size room are the Q Acoustics 3020i and Klipsch R-41M speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Q Acoustics 3020i and Klipsch R-41M compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both 3020i and R-41M are 2-way speakers.
| Driver |
Q Acoustics 3020i |
Klipsch R-41M |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
0.9-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 5-inch
|
1 x 4-inch
|
3020i features a 0.9" decoupled Tweeter and 1 x 5" Coated paper Woofer with a Crossover frequency at 2400Hz and 2400Hz. On the other hand, the R-41M features a 1" Tractrix Horn Tweeter and 1 x 4" Copper-spun IMG Woofer with a Crossover frequency at 1730Hz.
Frequency Response
3020i has a frequency range of 64-30k Hz whereas R-41M has a frequency range of 68-21k Hz. With a minimum frequency of 46Hz, the 3020i can go significantly deeper on the low side and provide stronger bass compared to the R-41M's min frequency of 68Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
3020i is a 6 ohms speaker compared to the R-41M which has a nominal impedance of 8 ohms.
These two speakers also have different sensitivity levels. 3020i sensitivity is rated at 88 dB and the R-41M's is rated at 90 dB. This 2 dB difference makes the Klipsch R-41M a more sensitive speaker compared to Q Acoustics 3020i, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
3020i can handle a max power of 75 watts RMS from the amp the whereas R-41M has a max power handling value of 50 watts RMS, 25 watts less than the 3020i.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
3020i features Single Gold Plated Binding Posts type posts and R-41M has a Single Gold Plated Binding Posts type posts. None of these speakers feature bi-amping/bi-wiring.
Klipsch R-41M's Single Gold Plated Binding Posts terminals
Cabinet Type and Port Position
Both 3020i and R-41M have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Q Acoustics 3020i's and Klipsch R-41M's external dimensions. Q Acoustics 3020i has external dimensions of 278.0 x 170.0 x 282.0mm ( 10.9 x 6.6 x 11.1inch) whereas Klipsch R-41M has external dimensions of 287.0 x 146.0 x 200.0mm ( 11.2 x 5.7 x 7.8inch) .
Klipsch R-41M is 24mm narrower and 82mm less deeper than Q Acoustics 3020i but it is also 9mm taller.
Below you can see the front view size comparison of Q Acoustics 3020i and Klipsch R-41M in scale.
Comparison image of Q Acoustics 3020i and Klipsch R-41M Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Q Acoustics 3020i is approximately 479.4cm2 / 74.3inch2 and base area of the Klipsch R-41M is approximately 292.0cm2 / 45.3inch2. The 3020i requires 64% more surface area than the R-41M which gives it a small disadvantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Size Comparison image of Q Acoustics 3020i and Klipsch R-41M on a Media Console
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Q Acoustics 3020i weighs 4.80kg / 10.6lbs and the Klipsch R-41M weighs 3.20kg / 7lbs. This makes the 3020i 50% heavier than the R-41M.
Here is a comparison of how 3020i and R-41M's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Q Acoustics 3020i?
Here are the items that are included inside the box of 3020i:
2 x 3020i bookshelf speakers 2 x Foam Bungs 2 x Speaker Grilles 1 x User Manual 1 x Handling Gloves 8 x Rubber Speaker Grips
What's in the Box of Klipsch R-41M?
Here are the items that come with the R-41M:
2 Bookshelf loudspeakers 2 Grilles (installed) 8 Self-adhesive rubber feet Quick Setup Guide Important Safety Instructions Warranty Information
 Max Input Power |
75 watts
vs
50 watts
|
Handle more power from your amplifier |
 Woofer Size |
5 inches
vs
4 inches
|
Larger woofer |
| Low Frequency Response |
46 Hz
vs
68 Hz
|
Generates deeper bass |
 High Frequency Response |
30k Hz
vs
21k Hz
|
Generates higher frequency |
 Height |
278mm
vs
287mm
|
Easier to fit in smaller spaces |
 Sensitivity |
90 dB
vs
88 dB
|
Play louder with same amount of amplification power |
 Nominal Impedance |
8 ohms
vs
6 ohms
|
Less selective with amplifiers |
 Mounting Bracket |
Yes
vs
No
|
Allows mounting on walls |
 Base Surface Area |
292cm2 (146x200mm)
vs
479cm2 (170x282mm)
|
Takes less floor space |
 Price per pair* |
229USD
vs
399USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Q Acoustics 3020i |
Klipsch Reference R-41M |
| Brand |
Q Acoustics |
Klipsch |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
25-75 watts |
50 watts |
| Sensitivity |
88 dB |
90 dB |
| Impedance |
6 ohms |
8 ohms |
| Impedance |
4 ohms |
n/a |
| Frequency Response |
64-30k Hz |
68-21k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
5" |
4" |
| Woofer Composition |
Coated paper |
Copper-spun IMG |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
0.9" |
1" |
| Tweeter Type |
decoupled |
Tractrix Horn |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
2400Hz and 2400Hz |
1730Hz |
| Firing Direction |
rear |
rear |
Physical Specs |
|
|
| Height |
278.0mm (10.9") |
287.0mm (11.3") |
| Width |
170.0mm (6.7") |
146.0mm (5.7") |
| Depth |
282.0mm (11.1") |
200.0mm (7.9") |
| Weight |
4.80kg (10.6lbs) |
3.20kg (7lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
n/a |
MDF/Wood-grain vinyl |
| Available Colors |
Walnut, Black, White, Grey |
Black |
| Mounting Bracket |
No |
Keyhole |
| Recommended Stand Height |
n/a |
26-31" |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
No |
Other |
|
|
| Parts Warranty |
4 Years |
5 Years |
| Labor Warranty |
4 Years |
5 Years |