In this review, we will be comparing two different type of speakers by Klipsch. Klipsch Reference RF-7 III is a Floor-standing speaker whereas the R-41M is a Bookshelf speaker.
Let's have a brief look at the main features
of Klipsch RF-7 III and Klipsch R-41M first before getting into our more
detailed comparison.
Klipsch RF-7 III Key Specs
- 2-way Design
- 1.75" dome Tweeter
- 2 x 10" Cerametallic Woofer
- 32-25k Hz Frequency Response
- 100 dB Sensitivity
- Impedance: 8ohms
- Power Range:up to 250watts
- Weight:44.10kg
- Dimensions (H x W x D): 1247.0" x 13-15/16" x 17-15/16"( 1247.0 x 355.0 x 456.0mm )
Klipsch R-41M Key Specs
- 2-way Design
- 1" Tractrix Horn Tweeter
- 4" Copper-spun IMG Woofer
- 68-21k Hz Frequency Response
- 90 dB Sensitivity
- Impedance: 8ohms
- Power Range:50watts
- Weight:3.20kg
- Dimensions (H x W x D): 287.0" x 5.7" x 7.8"( 287.0 x 146.0 x 200.0mm )
What size room are the Klipsch RF-7 III and Klipsch R-41M speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Klipsch RF-7 III |
Klipsch R-41M |
| Near-field |
Bad |
Good |
| Small Room |
Poor |
Good |
| Mid-size Room |
Average |
Average |
| Large Room |
Good |
Poor |
| Very Large Room |
Average |
No way |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Klipsch RF-7 III and Klipsch R-41M compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both RF-7 III and R-41M are 2-way speakers.
| Driver |
Klipsch RF-7 III |
Klipsch R-41M |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1.75-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 10-inch
|
1 x 4-inch
|
RF-7 III features a 1.75" titanium dome Tweeter and 2 x 10" Cerametallic Woofer with a Crossover frequency at 1300Hz. On the other hand, the R-41M features a 1" Tractrix Horn Tweeter and 1 x 4" Copper-spun IMG Woofer with a Crossover frequency at 1730Hz.
Frequency Response
RF-7 III has a frequency range of 32-25k Hz whereas R-41M has a frequency range of 68-21k Hz. With a minimum frequency of 32Hz, the RF-7 III can go significantly deeper on the low side and provide stronger bass compared to the R-41M's min frequency of 68Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
RF-7 III and R-41M have the same Impedance of 8 ohms but where they differ is the sensitivity levels. RF-7 III sensitivity is rated at 100 dB and the R-41M's is at 90 dB. This 10 dB difference makes the Klipsch RF-7 III a more sensitive speaker compared to Klipsch R-41M, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
RF-7 III can handle a max power of 250 watts RMS from the amp the whereas R-41M has a max power handling value of 50 watts RMS, 200 watts less than the RF-7 III.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
RF-7 III features Binding post posts which make bi-amping or bi-wiring possible. R-41M has a Single Gold Plated Binding Posts which doesn't feature bi-amping/bi-wiring.
Klipsch RF-7 III's Binding post terminals allows Bi-amping or bi-wiring
Klipsch R-41M's Single Gold Plated Binding Posts terminals
Cabinet Type and Port Position
Both RF-7 III and R-41M have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch RF-7 III's and Klipsch R-41M's external dimensions. Klipsch RF-7 III has external dimensions of 1247.0 x 355.0 x 456.0mm ( 49-1/16 x 13-15/16 x 17-15/16inch) whereas Klipsch R-41M has external dimensions of 287.0 x 146.0 x 200.0mm ( 11.2 x 5.7 x 7.8inch) .
Klipsch RF-7 III is clearly the larger of the two speakers. Its body is 209mm wider, 960mm taller and 256mm deeper than Klipsch R-41M.
Below you can see the front view size comparison of Klipsch RF-7 III and Klipsch R-41M in scale.
Comparison image of Klipsch RF-7 III and Klipsch R-41M Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch RF-7 III is approximately 1618.8cm2 / 250.9inch2 and base area of the Klipsch R-41M is approximately 292.0cm2 / 45.3inch2. The RF-7 III requires 454% more surface area than the R-41M which gives it a small disadvantage on placement in tight spaces.
What's in the Box of Klipsch RF-7 III?
Here are the items that are included inside the box of RF-7 III:
Floorstanding loudspeakerPlinthGrille4 Spike feet4 Rubber feet2 Jumpers (pre-installed)4 Machine screwsOwners Manual
What's in the Box of Klipsch R-41M?
Here are the items that come with the R-41M:
2 Bookshelf loudspeakers 2 Grilles (installed) 8 Self-adhesive rubber feet Quick Setup Guide Important Safety Instructions Warranty Information