In this review, we will be comparing M30.3 XD2 and Evoke 30, two Passive Bookshelf speakers from Harbeth and Dynaudio.
Let's have a brief look at the main features
of Harbeth M30.3 XD2 and Dynaudio Evoke 10 first before getting into our more
detailed comparison.
| Key Specs | Harbeth M30.3 XD2 | Dynaudio Evoke 10 |
|---|
| Design | 2-way | 2-way |
|---|
| Tweeter | 1" Dome | 1.1" |
|---|
| Woofer | 8" RADIAL | 5.5" Magnesium Silicate Polymer |
|---|
| Frequency response | 50-20k Hz | 47-23k Hz |
|---|
| Sensitivity | 85 dB | 84 dB |
|---|
| Impedance | 6 ohms | 6 ohms |
|---|
| Power range | 25-150 watts | up to 160 watts |
|---|
| Weight | 11.60kg / 25.5lbs | 6.70kg / 14.7lbs |
|---|
| Dimensions (H x W x D) | 18-1/8" x 10-7/8" x 10-13/16"
460.0 x 277.0 x 275.0mm | 12.4" x 7.1" x 10.5"
315.0 x 180.0 x 266.0mm |
|---|
What size room are the Harbeth M30.3 XD2 and Dynaudio Evoke 10 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Harbeth M30.3 XD2 |
Dynaudio Evoke 10 |
| Near-field |
Average |
Poor |
| Small Room |
Good |
Average |
| Mid-size Room |
Average |
Good |
| Large Room |
Poor |
Average |
| Very Large Room |
Bad |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking
through our links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both M30.3 XD2 and Evoke 30 are 2-way speakers.
Harbeth M30.3 XD2Dynaudio Evoke 10
TweeterWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
Harbeth M30.3 XD2 |
Dynaudio Evoke 10 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1.1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 8-inch
|
1 x 5.5-inch
|
M30.3 XD2 features a 1" Ferrofluid-cooled dome Dome Tweeter and 1 x 8" RADIAL Woofer. On the other hand, the Evoke 30 features a 1.1" Cerotar with Hexis Tweeter and 1 x 5.5" Magnesium Silicate Polymer Woofer with a Crossover frequency at 1400Hz.
Frequency Response
M30.3 XD2 has a frequency range of 50-20k Hz whereas Evoke 30 has a frequency range of 47-23k Hz. With a minimum frequency of 47Hz, the Evoke 30 can go slightly deeper then the M30.3 XD2's min frequency of 50Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
M30.3 XD2 and Evoke 30 have the same Impedance of 6 ohms but where they differ is the sensitivity levels. M30.3 XD2 sensitivity is rated at 85 dB and the Evoke 30's is at 84 dB. This 1 dB difference makes the Harbeth M30.3 XD2 a more sensitive speaker compared to Dynaudio Evoke 10, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. Staying
within that range gives nominal performance; driving the speaker beyond its maximum wattage can damage it.
Evoke 30 can handle a max power of 160 watts RMS, whereas M30.3 XD2 has a max power handling value of 150 watts RMS, 10 watts less than the Evoke 30.
Note that higher power handling does not make a speaker louder: that depends mainly on
sensitivity and impedance. The calculator below shows how loud each of these actually plays
on a real amplifier.
Which plays louder on your amplifier?
Starting with a popular amplifier — change it to the one you own, or any you are
considering, and watch both numbers move.
Input Type and Bi-Amping / Bi-Wiring
M30.3 XD2 features Binding post type posts and Evoke 30 has a Binding post type posts. None of these speakers feature bi-amping/bi-wiring.
Dynaudio Evoke 10's Binding post terminals
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Harbeth M30.3 XD2's and Dynaudio Evoke 10's external dimensions. Harbeth M30.3 XD2 has external dimensions of 460.0 x 277.0 x 275.0mm (18-1/8 x 10-7/8 x 10-13/16inch) whereas Dynaudio Evoke 10 has external dimensions of 315.0 x 180.0 x 266.0mm (12.4 x 7.1 x 10.5inch).
Harbeth M30.3 XD2 is clearly the larger of the two speakers. Its body is 97mm wider, 145mm taller and 9mm deeper than Dynaudio Evoke 10.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Harbeth M30.3 XD2 is approximately 761.8cm2 / 118.1inch2 and base area of the Dynaudio Evoke 10 is approximately 478.8cm2 / 74.2inch2. The M30.3 XD2 requires 59% more surface area than the Evoke 30 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Harbeth M30.3 XD2 weighs 11.60kg / 25.5lbs and the Dynaudio Evoke 10 weighs 6.70kg / 14.7lbs. This makes the M30.3 XD2 73% heavier than the Evoke 30.
Here is a comparison of how M30.3 XD2 and Evoke 30's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Dynaudio Evoke 10?
Here are the items that come with the Evoke 30:
 Sensitivity |
85 dB
vs
84 dB
|
Play louder with same amount of amplification power |
 Woofer Size |
8 inches
vs
5.5 inches
|
Larger woofer |
 Max Input Power |
160 watts
vs
150 watts
|
Handle more power from your amplifier |
|
Low Frequency Response |
47 Hz
vs
50 Hz
|
Generates deeper bass |
 High Frequency Response |
23k Hz
vs
20k Hz
|
Generates higher frequency |
 Height |
315mm
vs
460mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
478cm2
vs
761cm2
|
Takes less floor space |
 Price per pair* |
3500USD
vs
6290USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Harbeth M30.3 XD2 |
Dynaudio Evoke 10 |
| Brand |
Harbeth |
Dynaudio |
| Speaker Type |
Bookshelf speakers |
Floor-standing speaker |
| Power Range |
25-150 watts |
up to 160 watts |
| Sensitivity |
85 dB |
84 dB |
| Impedance |
6 ohms |
6 ohms |
| Frequency Response |
50-20k Hz |
47-23k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
8" |
5.5" |
| Woofer Composition |
RADIAL |
Magnesium Silicate Polymer |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
1" |
1.1" |
| Tweeter Type |
Dome |
n/a |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
n/a |
1400Hz |
| Firing Direction |
n/a |
rear |
Physical Specs |
|
|
| Height |
460.0mm (18.1") |
315.0mm (12.4") |
| Width |
277.0mm (10.9") |
180.0mm (7.1") |
| Depth |
275.0mm (10.8") |
266.0mm (10.5") |
| Weight |
11.60kg (25.5lbs) |
6.70kg (14.7lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
n/a |
MDF/Wood veneer |
| Available Colors |
n/a |
Black |
| Mounting Bracket |
|
No |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
No |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years (8 Years registered) |
| Labor Warranty |
5 Years |
5 Years (8 Years registered) |
These sit in different price classes - Harbeth M30.3 XD2 costs roughly 1.8x what Dynaudio Evoke 10 does. Expect it to lead on paper; the question is whether the gap is audible enough in your room to be worth it.
| Area | Better | Why |
|---|
| Bass |
B |
Dynaudio Evoke 10 digs deeper - 47Hz against 50Hz. A subwoofer would even that out. |
| Amplifier needs |
evenly matched |
Similar sensitivity (85dB vs 84dB) - both want much the same power. |
| Headroom |
evenly matched |
Similar power handling (150W vs 160W). |
| Size |
depends |
Dynaudio Evoke 10 is easier to place; Harbeth M30.3 XD2 is bigger, which usually goes with fuller bass. Your room decides. |
| Price |
B |
Dynaudio Evoke 10 is cheaper - $3,500 against $6,290, about 44% less; arguably a different class. |
A Harbeth M30.3 XD2
B Dynaudio Evoke 10
depends neither is better in the abstract - it turns on your room, placement or how you will use them.
Only specs published for both speakers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
Dynaudio Evoke 10 has the edge on paper, though the margin is not large. The rows marked "depends" may matter more to you than the score does. Match it to your room: we rate Harbeth M30.3 XD2 the better fit for near-field listening and a small room, and Dynaudio Evoke 10 for a mid-size room and a large room. In a large or open-plan room, Harbeth M30.3 XD2 has the cabinet volume to fill it more easily; in a small room, near a wall or at desk distance, Dynaudio Evoke 10 is the easier speaker to get right.
And remember what a spec sheet cannot show: how each looks in your room and whether the finish suits it, what dealer support and warranty are like where you live, and how they actually sound to you. If you can hear them first - ideally with your own music - that will tell you more than any number above.