In this review, we will be comparing D320 and M126Be, two Passive Bookshelf speakers from Wharfedale and Revel.
Let's have a brief look at the main features
of Wharfedale D320 and Revel M126Be first before getting into our more
detailed comparison.
| Key Specs | Wharfedale D320 | Revel M126Be |
|---|
| Brand | Wharfedale
United Kingdom · founded 1932 | Revel
United States · founded 1996 |
|---|
| Design | 2-way | 2-way |
|---|
| Tweeter | 1" Soft-Dome | 1" Hard-Dome |
|---|
| Woofer | 5" Woven Kevlar | 6.5" DCC Aluminum |
|---|
| Frequency response | 56-20k Hz | 54-44k Hz |
|---|
| Sensitivity | 87 dB | 86 dB |
|---|
| Impedance | 8 ohms | 8 ohms |
|---|
| Power range | 25-100 watts | 50-150 watts |
|---|
| Weight | 6.02kg / 13.2lbs | 10.00kg / 22lbs |
|---|
| Dimensions (H x W x D) | 12-5/8" x 7-1/8" x 10-7/8"
321.0 x 181.0 x 277.0mm | 15-1/4" x 8-5/16" x 10-5/16"
388.0 x 212.0 x 262.0mm |
|---|
What size room are the Wharfedale D320 and Revel M126Be speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Wharfedale D320 |
Revel M126Be |
| Near-field |
Average |
Poor |
| Small Room |
Good |
Average |
| Mid-size Room |
Average |
Good |
| Large Room |
Poor |
Average |
| Very Large Room |
Bad |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
Drivers
Both D320 and M126Be are 2-way speakers.
Wharfedale D320Revel M126Be
TweeterWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
Wharfedale D320 |
Revel M126Be |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 5-inch
|
1 x 6.5-inch
|
D320 features a 1" Soft-Dome Tweeter and 1 x 5" Woven Kevlar Woofer. On the other hand, the M126Be features a 1" beryllium Hard-Dome Tweeter and 1 x 6.5" DCC Aluminum Woofer.
Frequency Response
D320 has a frequency range of 56-20k Hz whereas M126Be has a frequency range of 54-44k Hz. With a minimum frequency of 54Hz, the M126Be can go slightly deeper then the D320's min frequency of 56Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
D320 and M126Be have the same Impedance of 8 ohms but where they differ is the sensitivity levels. D320 sensitivity is rated at 87 dB and the M126Be's is at 86 dB. This 1 dB difference makes the Wharfedale D320 a more sensitive speaker compared to Revel M126Be, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. Staying
within that range gives nominal performance; driving the speaker beyond its maximum wattage can damage it.
M126Be can handle a max power of 150 watts RMS, whereas D320 has a max power handling value of 100 watts RMS, 50 watts less than the M126Be.
Note that higher power handling does not make a speaker louder: that depends mainly on
sensitivity and impedance. The calculator below shows how loud each of these actually plays
on a real amplifier.
Which plays louder on your amplifier?
Starting with a popular amplifier - change it to the one you own, or any you are
considering, and watch both numbers move.
Input Type and Bi-Amping / Bi-Wiring
D320 features Binding post type posts and M126Be has a Binding post type posts. None of these speakers feature bi-amping/bi-wiring.
Wharfedale D320's Post terminals
Cabinet Type and Port Position
D320 has a bottom firing port whereas M126Be has a rear firing ports. Wharfedale D320's bottom-firing port gives more flexibility in placement in regards to proximity to walls compared to Revel M126Be with its rear-firing port.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Wharfedale D320's and Revel M126Be's external dimensions. Wharfedale D320 has external dimensions of 321.0 x 181.0 x 277.0mm (12-5/8 x 7-1/8 x 10-7/8inch) whereas Revel M126Be has external dimensions of 388.0 x 212.0 x 262.0mm (15-1/4 x 8-5/16 x 10-5/16inch).
Wharfedale D320 is 31mm narrower and 67mm shorter than Revel M126Be but it is also 15mm deeper.
Below you can see the front view size comparison of Wharfedale D320 and Revel M126Be in scale.
Comparison image of Wharfedale D320 and Revel M126Be Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Wharfedale D320 is approximately 501.4cm2 / 77.7inch2 and base area of the Revel M126Be is approximately 555.4cm2 / 86.1inch2. The D320 requires 10% less surface area than the M126Be which gives it a small advantage on placement in tight spaces.
Here is another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Size Comparison image of Wharfedale D320 and Revel M126Be on a Media Console
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Wharfedale D320 weighs 6.02kg / 13.2lbs and the Revel M126Be weighs 10.00kg / 22lbs. This makes the M126Be 66% heavier than the D320.
Here is a comparison of how D320 and M126Be's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Wharfedale D320?
Here are the items that are included inside the box of D320:
- 2 Bookshelf loudspeakers
- 2 Tweeter grilles (pre-installed)
- 2 Woofer grilles (pre-installed)
- User-feets Manual
- Installation Guide
What's in the Box of Revel M126Be?
Here are the items that come with the M126Be:
- Bookshelf loudspeaker
- Grille
- Foam port plug
- Owners Manual
 Sensitivity |
87 dB
vs
86 dB
|
Play louder with same amount of amplification power |
 Height |
321mm
vs
388mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
501cm2
vs
555cm2
|
Takes less floor space |
 Price per pair* |
249USD
vs
4400USD
|
costs less (*prices may change depending on the seller, location and time) |
 Max Input Power |
150 watts
vs
100 watts
|
Handle more power from your amplifier |
 Woofer Size |
6.5 inches
vs
5 inches
|
Larger woofer |
|
Low Frequency Response |
54 Hz
vs
56 Hz
|
Generates deeper bass |
 High Frequency Response |
44k Hz
vs
20k Hz
|
Generates higher frequency |
| General |
Wharfedale D320 |
Revel PerformaBe M126Be |
| Brand |
Wharfedale |
Revel |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
25-100 watts |
50-150 watts |
| Sensitivity |
87 dB |
86 dB |
| Impedance |
8 ohms |
8 ohms |
| Impedance |
3.8 ohms |
n/a |
| Frequency Response |
56-20k Hz |
54-44k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
5" |
6.5" |
| Woofer Composition |
Woven Kevlar |
DCC Aluminum |
| Woofer Surround Material |
Foamed Polyether |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Soft-Dome |
Hard-Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
bottom |
rear |
Physical Specs |
|
|
| Height |
321.0mm (12.6") |
388.0mm (15.3") |
| Width |
181.0mm (7.1") |
212.0mm (8.3") |
| Depth |
277.0mm (10.9") |
262.0mm (10.3") |
| Weight |
6.02kg (13.2lbs) |
10.00kg (22lbs) |
| Enclosure |
Bass Reflex |
Bass reflex |
| Finish |
MDF/Wood-grain vinyl |
Wood/Lacquer |
| Available Colors |
Rosewood, Black, White, Walnut |
Walnut,Black,White,Silver |
| Mounting Bracket |
No |
No |
| Recommended Stand Height |
22-24" |
22-26" |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
No |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |
These sit in different price classes - Revel M126Be costs roughly 17.7x what Wharfedale D320 does. Expect it to lead on paper; the question is whether the gap is audible enough in your room to be worth it.
| Area | Better | Why |
|---|
| Bass | evenly matched | Much the same reach (56Hz vs 54Hz). |
| Amplifier needs | evenly matched | Similar sensitivity (87dB vs 86dB) - both want much the same power. |
| Headroom | B | Revel M126Be takes more power (150W vs 100W) - more in hand in a big room. |
| Size | depends | Wharfedale D320 is easier to place; Revel M126Be is bigger, which usually goes with fuller bass. Your room decides. |
| Price | A | Wharfedale D320 is cheaper - $249 against $4,400, about 94% less; arguably a different class. |
A Wharfedale D320 B Revel M126Be
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both speakers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
Revel M126Be is ahead, but only on 1 of the measured areas, and it costs about 17.7x the price. That is a lot of money for a narrow margin on paper - Wharfedale D320 looks like the sensible buy unless something else about the Revel M126Be appeals to you. Match it to your room: we rate Wharfedale D320 the better fit for near-field listening and a small room, and Revel M126Be for a mid-size room and a large room. Think about the whole system, not just the speakers: the roughly $4,151 saved by taking the cheaper pair would buy a subwoofer or a better amplifier, and either usually does more for the sound than the difference between these two.
And remember what a spec sheet cannot show: how each looks in your room and whether the finish suits it, what dealer support and warranty are like where you live, and how they actually sound to you. If you can hear them first - ideally with your own music - that will tell you more than any number above.