In this review, we will be comparing D9.2 and Synchrony T600, two Passive Floor-standing speakers from Spendor and PSB.
Let's have a brief look at the main features
of Spendor D9.2 and PSB Synchrony T600 first before getting into our more
detailed comparison.
| Key Specs | Spendor D9.2 | PSB Synchrony T600 |
|---|
| Design | 3-way | 3-way |
|---|
| Tweeter | 0.87" | 1" Dome |
|---|
| Midrange | 7.09" | 5.25" |
|---|
| Woofer | 7.09" | 3 x 6.5" Carbon fiber |
|---|
| Frequency response | 27-25k Hz | 24-23k Hz |
|---|
| Sensitivity | 90 dB | 89 dB |
|---|
| Impedance | 8 ohms | 4 ohms |
|---|
| Power range | — | 20-300 watts |
|---|
| Weight | 35.00kg / 77lbs | 34.90kg / 76.8lbs |
|---|
| Dimensions (H x W x D) | 45.5" x 8.3" x 15.7" 1155.7 x 210.8 x 398.8mm | 41-1/4" x 9" x 13-1/2" 1048.0 x 228.0 x 343.0mm |
|---|
What size room are the Spendor D9.2 and PSB Synchrony T600 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Spendor D9.2 |
PSB Synchrony T600 |
| Near-field |
Bad |
Bad |
| Small Room |
Poor |
Poor |
| Mid-size Room |
Average |
Average |
| Large Room |
Good |
Good |
| Very Large Room |
Average |
Average |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking
through our links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both D9.2 and Synchrony T600 are 3-way speakers.
Spendor D9.2PSB Synchrony T600
TweeterMidrangeWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
Spendor D9.2 |
PSB Synchrony T600 |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
0.87-inch
|
1-inch
|
|
Midrange
|
1 x 7.09-inch |
1 x 5.25-inch |
|
Woofer
|
1 x 7.09-inch
|
3 x 6.5-inch
|
D9.2 features a 0.87" Tweeter, a 7.09" Midrange and 1 x 7.09" Woofer with a Crossover frequency at 500 Hz, 4.2 kHz. On the other hand, the Synchrony T600 features a 1" titanium with ferrofluid cooling and neodymium magnet Dome Tweeter, a 5.25" Midrange and 3 x 6.5" Carbon fiber Woofer with a Crossover frequency at 450Hz and 1800Hz.
Frequency Response
D9.2 has a frequency range of 27-25k Hz whereas Synchrony T600 has a frequency range of 24-23k Hz. With a minimum frequency of 24Hz, the Synchrony T600 can go slightly deeper then the D9.2's min frequency of 27Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
D9.2 is a 8 ohms speaker compared to the Synchrony T600 which has a nominal impedance of 4 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the Synchrony T600 can provide this impedance level.
These two speakers also have different sensitivity levels. D9.2 sensitivity is rated at 90 dB and the Synchrony T600's is rated at 89 dB. This 1 dB difference makes the Spendor D9.2 a more sensitive speaker compared to PSB Synchrony T600, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Which plays louder on your amplifier?
Starting with a popular amplifier — change it to the one you own, or any you are
considering, and watch both numbers move.
Input Type and Bi-Amping / Bi-Wiring
Synchrony T600 features Binding post posts which make bi-amping or bi-wiring possible. D9.2 has a Binding post which doesn't feature bi-amping/bi-wiring.
PSB Synchrony T600's Binding post terminals allows Bi-amping or bi-wiring
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Spendor D9.2's and PSB Synchrony T600's external dimensions. Spendor D9.2 has external dimensions of 1155.7 x 210.8 x 398.8mm (45.5 x 8.3 x 15.7inch) whereas PSB Synchrony T600 has external dimensions of 1048.0 x 228.0 x 343.0mm (41-1/4 x 9 x 13-1/2inch).
PSB Synchrony T600 is 107.7mm shorter and 55.8mm less deeper than Spendor D9.2 but it is also 17.2mm wider.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Spendor D9.2 is approximately 840.7cm2 / 130.3inch2 and base area of the PSB Synchrony T600 is approximately 782.0cm2 / 121.2inch2. The D9.2 requires 8% more surface area than the Synchrony T600 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Spendor D9.2 weighs 35.00kg / 77lbs and the PSB Synchrony T600 weighs 34.90kg / 76.8lbs. This makes the D9.2 0% heavier than the Synchrony T600.
Here is a comparison of how D9.2 and Synchrony T600's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of PSB Synchrony T600?
Here are the items that come with the Synchrony T600:
- Floorstanding loudspeakr
- Grille
- 2 Binding-post jumpers (pre-installed)
- 4 Isolation feet
- 2 Port plugs
- Owners Manual
- Warranty Card
Sensitivity |
90 dB
vs
89 dB
|
Play louder with same amount of amplification power |
Nominal Impedance |
8 ohms
vs
4 ohms
|
Less selective with amplifiers |
Woofer Size |
7.09 inches
vs
6.5 inches
|
Larger woofer |
High Frequency Response |
25k Hz
vs
23k Hz
|
Generates higher frequency |
Number of Woofers |
3
vs
1
|
More woofers |
Low Frequency Response |
24 Hz
vs
27 Hz
|
Generates deeper bass |
Height |
1048mm
vs
1155mm
|
Easier to fit in smaller spaces |
Base Surface Area |
782cm2
vs
840cm2
|
Takes less floor space |
Price per pair* |
8000USD
vs
14998USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Spendor D9.2 |
PSB Synchrony T600 |
| Brand |
Spendor |
PSB |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Sensitivity |
90 dB |
89 dB |
| Impedance |
8 ohms |
4 ohms |
| Impedance |
n/a |
4 ohms |
| Frequency Response |
27-25k Hz |
24-23k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
3 |
| Woofer Size |
7.09" |
6.5" |
| Woofer Composition |
|
Carbon fiber |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
0.87" |
1" |
| Tweeter Type |
n/a |
Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
7.09" |
5.25" |
| Crossover Frequency |
500 Hz, 4.2 kHz |
450Hz and 1800Hz |
| Firing Direction |
n/a |
rear |
Physical Specs |
|
|
| Height |
1155.7mm (45.5") |
1048.0mm (41.3") |
| Width |
210.8mm (8.3") |
228.0mm (9") |
| Depth |
398.8mm (15.7") |
343.0mm (13.5") |
| Weight |
35.00kg (77lbs) |
34.90kg (76.8lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
n/a |
MDF/Lacquer |
| Available Colors |
n/a |
Gloss Black, Satin Walnut |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
n/a |
Yes |
Other |
|
|
| Parts Warranty |
|
5 Years |
| Labor Warranty |
|
5 Years |
These sit in different price classes - Spendor D9.2 costs roughly 1.9x what PSB Synchrony T600 does. Expect it to lead on paper; the question is whether the gap is audible enough in your room to be worth it.
| Area | Better | Why |
| Bass |
B |
PSB Synchrony T600 digs deeper - 24Hz against 27Hz. A subwoofer would even that out. |
| Amplifier needs |
evenly matched |
Similar sensitivity (90dB vs 89dB) - both want much the same power. |
| Amplifier match |
A |
Spendor D9.2 is the easier load at 8 ohms; the other is 4 ohms and wants an amplifier rated for it. |
| Size |
depends |
Similar cabinet size - neither is easier to fit. |
| Expandability |
B |
PSB Synchrony T600: bi-amping. |
| Price |
B |
PSB Synchrony T600 is cheaper - $8,000 against $14,998, about 47% less; arguably a different class. |
A Spendor D9.2
B PSB Synchrony T600
depends neither is better in the abstract - it turns on your room, placement or how you will use them.
Only specs published for both speakers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
PSB Synchrony T600 has the edge on paper, though the margin is not large. The rows marked "depends" may matter more to you than the score does. If your amplifier is modest, vintage or valve-based, Spendor D9.2 is the safer partner - the other will want more current or more watts to sound its best. Think about the whole system, not just the speakers: the roughly $6,998 saved by taking the cheaper pair would buy a subwoofer or a better amplifier, and either usually does more for the sound than the difference between these two.
And remember what a spec sheet cannot show: how each looks in your room and whether the finish suits it, what dealer support and warranty are like where you live, and how they actually sound to you. If you can hear them first - ideally with your own music - that will tell you more than any number above.