In this review, we will be comparing Bronze 1 and Diamond 220, two Passive Bookshelf speakers from Monitor Audio and Wharfedale. Let's have a brief look at the main features
of Monitor Audio Bronze 1 and Wharfedale 220 first before getting into our more
detailed comparison.
What size room are the Monitor Audio Bronze 1 and Wharfedale 220 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Monitor Audio Bronze 1 and Wharfedale 220 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Bronze 1 and Diamond 220 are 2-way speakers.
Driver |
Monitor Audio Bronze 1 |
Wharfedale 220 |
Driver Setup
|
2-way
|
2-way
|
Tweeter
|
1-inch
|
1-inch
|
Midrange
|
- |
- |
Woofer
|
1 x 5.5-inch
|
1 x 5-inch
|
Bronze 1 features a 1" Dome Tweeter and 1 x 5.5" C-CAM Woofer with a Crossover frequency at 2700Hz. On the other hand, the Diamond 220 features a 1" Dome Tweeter and 1 x 5" Woven Kevlar Woofer with a Crossover frequency at 2200Hz.
Frequency Response
Bronze 1 has a frequency range of 55-30k Hz whereas Diamond 220 has a frequency range of 56-20k Hz. With a minimum frequency of 55Hz, the Bronze 1 can go slightly deeper then the Diamond 220's min frequency of 56Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Bronze 1 and Diamond 220 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. Bronze 1 sensitivity is rated at 88 dB and the Diamond 220's is at 86 dB. This 2 dB difference makes the Monitor Audio Bronze 1 a more sensitive speaker compared to Wharfedale 220, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Bronze 1 can handle a max power of 100 watts RMS from the amp the whereas Bronze 1 has a max power handling value of 70 watts RMS , 30 watts less than the Diamond 220.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Diamond 220 features Post posts which make bi-amping or bi-wiring possible. Bronze 1 has a Post which doesn't feature bi-amping/bi-wiring.
Cabinet Type and Port Position
Bronze 1 has a rear firing port whereas Diamond 220 has a bottom firing ports. Wharfedale 220's bottom-firing port gives more flexibility in placement in regards to proximity to walls compared to Monitor Audio Bronze 1 with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Monitor Audio Bronze 1's and Wharfedale 220's external dimensions. Monitor Audio Bronze 1 has external dimensions of 260.0 x 165.0 x 205.0mm ( 10.2 x 6.4 x 8.0inch) whereas Wharfedale 220 has external dimensions of 315.0 x 174.0 x 255.0mm ( 12.4 x 6.8 x 10.0inch) .
Wharfedale 220 is clearly the larger of the two speakers. Its body is 9mm wider, 55mm taller and 50mm deeper than Monitor Audio Bronze 1.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Monitor Audio Bronze 1 is approximately 338.3cm2 / 52.4inch2 and base area of the Wharfedale 220 is approximately 443.7cm2 / 68.8inch2. The Bronze 1 requires 24% less surface area than the Diamond 220 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Monitor Audio Bronze 1 weighs 3.50kg / 7.7lbs and the Wharfedale 220 weighs 5.32kg / 11.7lbs. This makes the Diamond 220 52% heavier than the Bronze 1.
Here is a comparison of how Bronze 1 and Diamond 220's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Monitor Audio Bronze 1?
Here are the items that are included inside the box of Bronze 1:
2 Bookshelf loudspeakers 2 Grilles 2 Foam port plugs Hex-key Owner's Manual Important Safety Instructions
What's in the Box of Wharfedale 220?
Here are the items that come with the Diamond 220:
2 Bookshelf loudspeakers 2 Grilles (pre-installed) 8 Self-adhesive rubber feet User's Manual Installation Guide
Sensitivity |
88 dB
vs
86 dB
|
Play louder with same amount of amplification power |
Woofer Size |
5.5 inches
vs
5 inches
|
Larger woofer |
Low Frequency Response |
55 Hz
vs
56 Hz
|
Generates deeper bass |
High Frequency Response |
30k Hz
vs
20k Hz
|
Generates higher frequency |
Height |
260mm
vs
315mm
|
Easier to fit in smaller spaces |
Base Surface Area |
338cm2 (165x205mm)
vs
443cm2 (174x255mm)
|
Takes less floor space |
Max Input Power |
100 watts
vs
70 watts
|
Handle more power from your amplifier |
Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
General |
Monitor Audio Bronze 1 |
Wharfedale Diamond 220 |
Brand |
Monitor Audio |
Wharfedale |
Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
Power Range |
20-70 watts |
25-100 watts |
Sensitivity |
88 dB |
86 dB |
Impedance |
8 ohms |
8 ohms |
Impedance |
n/a |
4.1 ohms |
Frequency Response |
55-30k Hz |
56-20k Hz |
Drivers |
|
|
Woofer Quantity |
1 |
1 |
Woofer Size |
5.5" |
5" |
Woofer Composition |
C-CAM |
Woven Kevlar |
Woofer Surround Material |
Rubber |
Rubber |
Tweeter Size |
1" |
1" |
Tweeter Type |
Dome |
Dome |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
No |
Crossover Frequency |
2700Hz |
2200Hz |
Firing Direction |
rear |
bottom |
Physical Specs |
|
|
Height |
260.0mm (10.2") |
315.0mm (12.4") |
Width |
165.0mm (6.5") |
174.0mm (6.9") |
Depth |
205.0mm (8.1") |
255.0mm (10") |
Weight |
3.50kg (7.7lbs) |
5.32kg (11.7lbs) |
Enclosure |
Bass Reflex |
Bass Reflex |
Finish |
MDF/Wood-grain vinyl |
MDF/Wood veneer |
Available Colors |
Walnut, White, Rosemah, Black |
Black, White, Walnut |
Mounting Bracket |
No |
No |
Recommended Stand Height |
30-31" |
24" |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
No |
Yes |
Other |
|
|
Parts Warranty |
5 Years |
5 Years |
Labor Warranty |
5 Years |
5 Years |