In this review, we will be comparing Bronze 1 and 3030i, two Passive Bookshelf speakers from Monitor Audio and Q Acoustics. Let's have a brief look at the main features
of Monitor Audio Bronze 1 and Q Acoustics 3030i first before getting into our more
detailed comparison.
What size room are the Monitor Audio Bronze 1 and Q Acoustics 3030i speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Monitor Audio Bronze 1 and Q Acoustics 3030i compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Bronze 1 and 3030i are 2-way speakers.
Driver |
Monitor Audio Bronze 1 |
Q Acoustics 3030i |
Driver Setup
|
2-way
|
2-way
|
Tweeter
|
1-inch
|
1-inch
|
Midrange
|
- |
- |
Woofer
|
1 x 5.5-inch
|
1 x 6.5-inch
|
Bronze 1 features a 1" Dome Tweeter and 1 x 5.5" C-CAM Woofer with a Crossover frequency at 2700Hz. On the other hand, the 3030i features a 1" decoupled Tweeter and 1 x 6.5" Coated paper Woofer with a Crossover frequency at 2400Hz.
Frequency Response
Bronze 1 has a frequency range of 55-30k Hz whereas 3030i has a frequency range of 46-30k Hz. With a minimum frequency of 46Hz, the 3030i can go significantly deeper on the low side and provide stronger bass compared to the Bronze 1's min frequency of 55Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Bronze 1 is a 8 ohms speaker compared to the 3030i which has a nominal impedance of 6 ohms.
On the other hand, they have the same sensitivity of 88 dBdB.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Bronze 1 can handle a max power of 75 watts RMS from the amp the whereas Bronze 1 has a max power handling value of 70 watts RMS , 5 watts less than the 3030i.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Bronze 1 features Post type posts and 3030i has a Post type posts. None of these speakers feature bi-amping/bi-wiring.
Cabinet Type and Port Position
Both Bronze 1 and 3030i have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Monitor Audio Bronze 1's and Q Acoustics 3030i's external dimensions. Monitor Audio Bronze 1 has external dimensions of 260.0 x 165.0 x 205.0mm ( 10.2 x 6.4 x 8.0inch) whereas Q Acoustics 3030i has external dimensions of 325.0 x 200.0 x 329.0mm ( 12.7 x 7.8 x 12.9inch) .
Q Acoustics 3030i is clearly the larger of the two speakers. Its body is 35mm wider, 65mm taller and 124mm deeper than Monitor Audio Bronze 1.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Monitor Audio Bronze 1 is approximately 338.3cm2 / 52.4inch2 and base area of the Q Acoustics 3030i is approximately 658.0cm2 / 102.0inch2. The Bronze 1 requires 49% less surface area than the 3030i which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Monitor Audio Bronze 1 weighs 3.50kg / 7.7lbs and the Q Acoustics 3030i weighs 6.20kg / 13.6lbs. This makes the 3030i 77% heavier than the Bronze 1.
Here is a comparison of how Bronze 1 and 3030i's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Monitor Audio Bronze 1?
Here are the items that are included inside the box of Bronze 1:
2 Bookshelf loudspeakers 2 Grilles 2 Foam port plugs Hex-key Owner's Manual Important Safety Instructions
What's in the Box of Q Acoustics 3030i?
Here are the items that come with the 3030i:
2 x 3030i bookshelf speakers 2 x Speaker Grilles 2 x Foam Bungs 1 x User Manual
Nominal Impedance |
8 ohms
vs
6 ohms
|
Less selective with amplifiers |
Height |
260mm
vs
325mm
|
Easier to fit in smaller spaces |
Base Surface Area |
338cm2 (165x205mm)
vs
658cm2 (200x329mm)
|
Takes less floor space |
Max Input Power |
75 watts
vs
70 watts
|
Handle more power from your amplifier |
Woofer Size |
6.5 inches
vs
5.5 inches
|
Larger woofer |
Low Frequency Response |
46 Hz
vs
55 Hz
|
Generates deeper bass |
General |
Monitor Audio Bronze 1 |
Q Acoustics 3030i |
Brand |
Monitor Audio |
Q Acoustics |
Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
Power Range |
20-70 watts |
25-75 watts |
Sensitivity |
88 dB |
88 dB |
Impedance |
8 ohms |
6 ohms |
Impedance |
n/a |
4 ohms |
Frequency Response |
55-30k Hz |
46-30k Hz |
Drivers |
|
|
Woofer Quantity |
1 |
1 |
Woofer Size |
5.5" |
6.5" |
Woofer Composition |
C-CAM |
Coated paper |
Woofer Surround Material |
Rubber |
Rubber |
Tweeter Size |
1" |
1" |
Tweeter Type |
Dome |
decoupled |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
No |
Crossover Frequency |
2700Hz |
2400Hz |
Firing Direction |
rear |
rear |
Physical Specs |
|
|
Height |
260.0mm (10.2") |
325.0mm (12.8") |
Width |
165.0mm (6.5") |
200.0mm (7.9") |
Depth |
205.0mm (8.1") |
329.0mm (13") |
Weight |
3.50kg (7.7lbs) |
6.20kg (13.6lbs) |
Enclosure |
Bass Reflex |
Bass Reflex |
Finish |
MDF/Wood-grain vinyl |
n/a |
Available Colors |
Walnut, White, Rosemah, Black |
Walnut, Black, White |
Mounting Bracket |
No |
No |
Recommended Stand Height |
30-31" |
n/a |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
No |
No |
Other |
|
|
Parts Warranty |
5 Years |
4 Years |
Labor Warranty |
5 Years |
4 Years |