In this review, we will be comparing Bronze 1 and Alpha P3, two Passive Bookshelf speakers from Monitor Audio and PSB. Let's have a brief look at the main features
of Monitor Audio Bronze 1 and PSB P3 first before getting into our more
detailed comparison.
What size room are the Monitor Audio Bronze 1 and PSB P3 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Monitor Audio Bronze 1 and PSB P3 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Bronze 1 and Alpha P3 are 2-way speakers.
Driver |
Monitor Audio Bronze 1 |
PSB P3 |
Driver Setup
|
2-way
|
2-way
|
Tweeter
|
1-inch
|
0.75-inch
|
Midrange
|
- |
- |
Woofer
|
1 x 5.5-inch
|
1 x 4.5-inch
|
Bronze 1 features a 1" Dome Tweeter and 1 x 5.5" C-CAM Woofer with a Crossover frequency at 2700Hz. On the other hand, the Alpha P3 features a 0.75" anodized aluminum Hard-Dome Tweeter and 1 x 4.5" Polypropylene Woofer with a Crossover frequency at 3000Hz.
Frequency Response
Bronze 1 has a frequency range of 55-30k Hz whereas Alpha P3 has a frequency range of 57-21k Hz. With a minimum frequency of 55Hz, the Bronze 1 can go slightly deeper then the Alpha P3's min frequency of 57Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Bronze 1 and Alpha P3 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. Bronze 1 sensitivity is rated at 88 dB and the Alpha P3's is at 87 dB. This 1 dB difference makes the Monitor Audio Bronze 1 a more sensitive speaker compared to PSB P3, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Bronze 1 can handle a max power of 80 watts RMS from the amp the whereas Bronze 1 has a max power handling value of 70 watts RMS , 10 watts less than the Alpha P3.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Bronze 1 features 5-way post type posts and Alpha P3 has a 5-way post type posts. None of these speakers feature bi-amping/bi-wiring.
Cabinet Type and Port Position
Both Bronze 1 and Alpha P3 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Monitor Audio Bronze 1's and PSB P3's external dimensions. Monitor Audio Bronze 1 has external dimensions of 260.0 x 165.0 x 205.0mm ( 10.2 x 6.4 x 8.0inch) whereas PSB P3 has external dimensions of 223.0 x 132.0 x 186.0mm ( 8-3/4 x 5-3/16 x 7-5/16inch) .
Monitor Audio Bronze 1 is clearly the larger of the two speakers. Its body is 33mm wider, 37mm taller and 19mm deeper than PSB P3.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Monitor Audio Bronze 1 is approximately 338.3cm2 / 52.4inch2 and base area of the PSB P3 is approximately 245.5cm2 / 38.1inch2. The Bronze 1 requires 38% more surface area than the Alpha P3 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Monitor Audio Bronze 1 weighs 3.50kg / 7.7lbs and the PSB P3 weighs 2.23kg / 4.9lbs. This makes the Bronze 1 57% heavier than the Alpha P3.
Here is a comparison of how Bronze 1 and Alpha P3's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Monitor Audio Bronze 1?
Here are the items that are included inside the box of Bronze 1:
2 Bookshelf loudspeakers 2 Grilles 2 Foam port plugs Hex-key Owner's Manual Important Safety Instructions
What's in the Box of PSB P3?
Here are the items that come with the Alpha P3:
2 Bookshelf loudspeakers 2 Grilles 8 Self-adhesive rubber feet Quick Start Guide Warranty Card
Sensitivity |
88 dB
vs
87 dB
|
Play louder with same amount of amplification power |
Woofer Size |
5.5 inches
vs
4.5 inches
|
Larger woofer |
Low Frequency Response |
55 Hz
vs
57 Hz
|
Generates deeper bass |
High Frequency Response |
30k Hz
vs
21k Hz
|
Generates higher frequency |
Max Input Power |
80 watts
vs
70 watts
|
Handle more power from your amplifier |
Height |
223mm
vs
260mm
|
Easier to fit in smaller spaces |
Base Surface Area |
245cm2 (132x186mm)
vs
338cm2 (165x205mm)
|
Takes less floor space |
General |
Monitor Audio Bronze 1 |
PSB Alpha P3 |
Brand |
Monitor Audio |
PSB |
Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
Power Range |
20-70 watts |
10-80 watts |
Sensitivity |
88 dB |
87 dB |
Impedance |
8 ohms |
8 ohms |
Impedance |
n/a |
4 ohms |
Frequency Response |
55-30k Hz |
57-21k Hz |
Drivers |
|
|
Woofer Quantity |
1 |
1 |
Woofer Size |
5.5" |
4.5" |
Woofer Composition |
C-CAM |
Polypropylene |
Woofer Surround Material |
Rubber |
Rubber |
Tweeter Size |
1" |
0.75" |
Tweeter Type |
Dome |
Hard-Dome |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
No |
Crossover Frequency |
2700Hz |
3000Hz |
Firing Direction |
rear |
rear |
Physical Specs |
|
|
Height |
260.0mm (10.2") |
223.0mm (8.8") |
Width |
165.0mm (6.5") |
132.0mm (5.2") |
Depth |
205.0mm (8.1") |
186.0mm (7.3") |
Weight |
3.50kg (7.7lbs) |
2.23kg (4.9lbs) |
Enclosure |
Bass Reflex |
Bass Reflex |
Finish |
MDF/Wood-grain vinyl |
MDF, Wood-grain vinyl |
Available Colors |
Walnut, White, Rosemah, Black |
Walnut,Black Ash |
Mounting Bracket |
No |
No |
Recommended Stand Height |
30-31" |
28-30" |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
No |
No |
Other |
|
|
Parts Warranty |
5 Years |
5 Years |
Labor Warranty |
5 Years |
5 Years |