In this review, we will be comparing Bronze 1 and Debut 2.0 B5.2, two Passive Bookshelf speakers from Monitor Audio and ELAC.
Let's have a brief look at the main features
of Monitor Audio Bronze 1 and ELAC Debut 2.0 B5.2 first before getting into our more
detailed comparison.
Monitor Audio Bronze 1 Key Specs
- 2-way Design
- 1" Dome Tweeter
- 5.5" C-CAM Woofer
- 55-30k Hz Frequency Response
- 88 dB Sensitivity
- Impedance: 8ohms
- Power Range:20-70watts
- Weight:3.50kg
- Dimensions (H x W x D): 260.0" x 6.4" x 8.0"( 260.0 x 165.0 x 205.0mm )
ELAC Debut 2.0 B5.2 Key Specs
- 2-way Design
- 1" Soft-dome Tweeter
- 5.25" Woven Aramid-Fiber Woofer
- 46-35k Hz Frequency Response
- 86 dB Sensitivity
- Impedance: 6ohms
- Power Range:120watts
- Weight:5.90kg
- Dimensions (H x W x D): 341.0" x 7.0" x 9.2"( 341.0 x 180.0 x 234.0mm )
What size room are the Monitor Audio Bronze 1 and ELAC Debut 2.0 B5.2 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Monitor Audio Bronze 1 |
ELAC Debut 2.0 B5.2 |
| Near-field |
Good |
Poor |
| Small Room |
Good |
Average |
| Mid-size Room |
Average |
Good |
| Large Room |
Poor |
Average |
| Very Large Room |
No way |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Monitor Audio Bronze 1 and ELAC Debut 2.0 B5.2 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Bronze 1 and Debut 2.0 B5.2 are 2-way speakers.
| Driver |
Monitor Audio Bronze 1 |
ELAC Debut 2.0 B5.2 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 5.5-inch
|
1 x 5.25-inch
|
Bronze 1 features a 1" Dome Tweeter and 1 x 5.5" C-CAM Woofer with a Crossover frequency at 2700Hz. On the other hand, the Debut 2.0 B5.2 features a 1" Cloth Soft-dome Tweeter and 1 x 5.25" Woven Aramid-Fiber Woofer with a Crossover frequency at 2200Hz.
Frequency Response
Bronze 1 has a frequency range of 55-30k Hz whereas Debut 2.0 B5.2 has a frequency range of 46-35k Hz. With a minimum frequency of 46Hz, the Debut 2.0 B5.2 can go significantly deeper on the low side and provide stronger bass compared to the Bronze 1's min frequency of 55Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Bronze 1 is a 8 ohms speaker compared to the Debut 2.0 B5.2 which has a nominal impedance of 6 ohms.
These two speakers also have different sensitivity levels. Bronze 1 sensitivity is rated at 88 dB and the Debut 2.0 B5.2's is rated at 86 dB. This 2 dB difference makes the Monitor Audio Bronze 1 a more sensitive speaker compared to ELAC Debut 2.0 B5.2, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
Bronze 1 can handle a max power of 120 watts RMS from the amp the whereas Bronze 1 has a max power handling value of 70 watts RMS , 50 watts less than the Debut 2.0 B5.2.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Bronze 1 features 5-Way Metal post type posts and Debut 2.0 B5.2 has a 5-Way Metal post type posts. None of these speakers feature bi-amping/bi-wiring.
Monitor Audio Bronze 1's Post terminals
ELAC Debut 2.0 B5.2's 5-Way Metal post terminals
Cabinet Type and Port Position
Bronze 1 has a rear firing port whereas Debut 2.0 B5.2 has a front firing ports. ELAC Debut 2.0 B5.2's front-firing port gives more flexibility in placement in regards to proximity to walls compared to Monitor Audio Bronze 1 with its rear-firing port.
Monitor Audio Bronze 1 Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Monitor Audio Bronze 1's and ELAC Debut 2.0 B5.2's external dimensions. Monitor Audio Bronze 1 has external dimensions of 260.0 x 165.0 x 205.0mm ( 10.2 x 6.4 x 8.0inch) whereas ELAC Debut 2.0 B5.2 has external dimensions of 341.0 x 180.0 x 234.0mm ( 13.4 x 7.0 x 9.2inch) .
ELAC Debut 2.0 B5.2 is clearly the larger of the two speakers. Its body is 15mm wider, 81mm taller and 29mm deeper than Monitor Audio Bronze 1.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Monitor Audio Bronze 1 is approximately 338.3cm2 / 52.4inch2 and base area of the ELAC Debut 2.0 B5.2 is approximately 421.2cm2 / 65.3inch2. The Bronze 1 requires 20% less surface area than the Debut 2.0 B5.2 which gives it a small advantage on placement in tight spaces.