In this review, we will be comparing .7 and Imagine X2T, two Passive Floor-standing speakers from Magnepan and PSB.
Let's have a brief look at the main features
of Magnepan .7 and PSB Imagine X2T first before getting into our more
detailed comparison.
| Key Specs | Magnepan .7 | PSB Imagine X2T |
|---|
| Design | — | 3-way |
|---|
| Tweeter | — | 1" Dome |
|---|
| Midrange | — | 5.25" |
|---|
| Woofer | — | 2 x 6.2" Clay/Ceramic/Poly |
|---|
| Frequency response | 45-22k Hz | 30-23k Hz |
|---|
| Sensitivity | 86 dB | 90 dB |
|---|
| Impedance | 4 ohms | 8 ohms |
|---|
| Power range | — | 20-200 watts |
|---|
| Weight | — | 23.60kg / 51.9lbs |
|---|
| Dimensions (H x W x D) | 54.25" x 15.25" x 1.25"
1378.0 x 387.4 x 31.8mm | 40-1/8" x 9" x 16-3/4"
1020.0 x 229.0 x 426.0mm |
|---|
What size room are the Magnepan .7 and PSB Imagine X2T speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Magnepan .7 |
PSB Imagine X2T |
| Near-field |
Poor |
Bad |
| Small Room |
Average |
Poor |
| Mid-size Room |
Good |
Good |
| Large Room |
Average |
Good |
| Very Large Room |
Poor |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking
through our links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that .7 is a -way design whereas the Imagine X2T is a 3-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
Magnepan .7 |
PSB Imagine X2T |
|
Driver Setup
|
-way
|
3-way
|
|
Tweeter
|
-inch
|
1-inch
|
|
Midrange
|
- |
1 x 5.25-inch |
|
Woofer
|
x -inch
|
2 x 6.2-inch
|
.7 features a " Tweeter and x " Woofer. On the other hand, the Imagine X2T features a 1" titanium with neodymium magnets Dome Tweeter, a 5.25" Midrange and 2 x 6.2" Clay/Ceramic/Poly Woofer with a Crossover frequency at 500Hz and 2200Hz.
Frequency Response
.7 has a frequency range of 45-22k Hz whereas Imagine X2T has a frequency range of 30-23k Hz. With a minimum frequency of 30Hz, the Imagine X2T can go significantly deeper on the low side and provide stronger bass compared to the .7's min frequency of 45Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
.7 is a 4 ohms speaker compared to the Imagine X2T which has a nominal impedance of 8 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the .7 can provide this impedance level.
These two speakers also have different sensitivity levels. .7 sensitivity is rated at 86 dB and the Imagine X2T's is rated at 90 dB. This 4 dB difference makes the PSB Imagine X2T a more sensitive speaker compared to Magnepan .7, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Which plays louder on your amplifier?
Starting with a popular amplifier — change it to the one you own, or any you are
considering, and watch both numbers move.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Magnepan .7's and PSB Imagine X2T's external dimensions. Magnepan .7 has external dimensions of 1378.0 x 387.4 x 31.8mm (54.25 x 15.25 x 1.25inch) whereas PSB Imagine X2T has external dimensions of 1020.0 x 229.0 x 426.0mm (40-1/8 x 9 x 16-3/4inch).
PSB Imagine X2T is 158.4mm narrower and 358mm shorter than Magnepan .7 but it is also 394.2mm deeper.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Magnepan .7 is approximately 123.2cm2 / 19.1inch2 and base area of the PSB Imagine X2T is approximately 975.5cm2 / 151.2inch2. The .7 requires 87% less surface area than the Imagine X2T which gives it a small advantage on placement in tight spaces.
What's in the Box of PSB Imagine X2T?
Here are the items that come with the Imagine X2T:
- Floor-standing speaker
- Grille
- 4 Rubber feet
- 4 Spiked Feet
- Wrench
- Quick Start Guide
- Warranty Card