SpeakerDecision
  • SPEAKERS by TYPE
    • Passive Bookshelf Speakers
    • Passive Floor-standing Speakers
    • Passive Center Channel Speakers
    • Passive In-wall Speakers
    • All Passive Speakers
    • Powered Subwoofers
    • Powered Stereo Speakers
  • AMPLIFIERS
  • SMART FIND

Klipsch RP-600M vs Q Acoustics 3030i Comparison

x
Speaker to replace
Change

Klipsch RP-600M

Passive Bookshelf | 45-25k Hz

Klipsch Reference Premiere RP-600M
CHECK PRICE
Change
    
Q Acoustics 3030i

Passive Bookshelf | 46-30k Hz

Q Acoustics 3030i
CHECK PRICE
Klipsch RP-600M Klipsch RP-600M
See at AMAZON
Q Acoustics 3030i Q Acoustics 3030i
See at AMAZON
Klipsch RP-600M
See at AMAZON
Q Acoustics 3030i
See at AMAZON
Klipsch RP-600M vs Q Acoustics 3030i Speaker Comparison

In this review, we will be comparing RP-600M and 3030i, two Passive Bookshelf speakers from Klipsch and Q Acoustics.

Let's have a brief look at the main features of Klipsch RP-600M and Q Acoustics 3030i first before getting into our more detailed comparison.

Klipsch RP-600M Key Specs

  • 2-way Design
  • 1" Tractrix Horn Tweeter
  • 6.5" Cerametallic Woofer
  • 45-25k Hz Frequency Response
  • 96 dB Sensitivity
  • Impedance: 8ohms
  • Power Range:up to 100watts
  • Weight:7.30kg
  • Dimensions (H x W x D): 399.0" x 7.9" x 11.8"( 399.0 x 202.0 x 301.0mm )

Q Acoustics 3030i Key Specs

  • 2-way Design
  • 1" decoupled Tweeter
  • 6.5" Coated paper Woofer
  • 46-30k Hz Frequency Response
  • 88 dB Sensitivity
  • Impedance: 6ohms
  • Power Range:25-75watts
  • Weight:6.20kg
  • Dimensions (H x W x D): 325.0" x 7.8" x 12.9"( 325.0 x 200.0 x 329.0mm )

What size room are the Klipsch RP-600M and Q Acoustics 3030i speakers good for?

The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:

Listening Environment* Klipsch RP-600M Q Acoustics 3030i
Near-field Average Good
Small Room Good Good
Mid-size Room Average Average
Large Room Poor Poor
Very Large Room Bad No way

(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2. Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)

In the following sections, we will get into more detail in order to better understand how the Klipsch RP-600M and Q Acoustics 3030i compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.


**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.


Drivers

Both RP-600M and 3030i are 2-way speakers.

Driver Klipsch RP-600M Q Acoustics 3030i
Driver Setup 2-way 2-way
Tweeter 1-inch 1-inch
Midrange - -
Woofer 1 x 6.5-inch 1 x 6.5-inch

RP-600M features a 1" Tractrix Horn Tweeter and 1 x 6.5" Cerametallic Woofer with a Crossover frequency at 1500Hz. On the other hand, the 3030i features a 1" decoupled Tweeter and 1 x 6.5" Coated paper Woofer with a Crossover frequency at 2400Hz.

Frequency Response

RP-600M has a frequency range of 45-25k Hz whereas 3030i has a frequency range of 46-30k Hz. With a minimum frequency of 45Hz, the RP-600M can go slightly deeper then the 3030i's min frequency of 46Hz.

Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.

Low Frequency

Bookshelf Speakers

RP-600M
3030i
Min
Average
Max
High Frequency

Bookshelf Speakers

Klipsch RP-600M
Q Acoustics 3030i
Min
Average
Max

None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.

Impedance and Sensitivity

RP-600M is a 8 ohms speaker compared to the 3030i which has a nominal impedance of 6 ohms.

These two speakers also have different sensitivity levels. RP-600M sensitivity is rated at 96 dB and the 3030i's is rated at 88 dB. This 8 dB difference makes the Klipsch RP-600M a more sensitive speaker compared to Q Acoustics 3030i, hence will play louder with the same amount of watts.

Sensitivity

Bookshelf Speakers

RP-600M
3030i
Min
Average
Max

Power Range

Power range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.

RP-600M can handle a max power of 100 watts RMS from the amp the whereas 3030i has a max power handling value of 75 watts RMS, 25 watts less than the RP-600M.

Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters such as Impedance, sensitivity and system efficiencies.

Input Type and Bi-Amping / Bi-Wiring

RP-600M features Dual binding posts/bi-wire/bi-amp posts which make bi-amping or bi-wiring possible. 3030i has a Binding post which doesn't feature bi-amping/bi-wiring.

Klipsch RP-600M Terminals
Klipsch RP-600M's Dual binding posts/bi-wire/bi-amp terminals allows Bi-amping or bi-wiring

Cabinet Type and Port Position

Both RP-600M and 3030i have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.

If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.

Klipsch RP-600M  Port
Klipsch RP-600M Tractrix horn-shaped Port

Physical Specs

Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch RP-600M's and Q Acoustics 3030i's external dimensions. Klipsch RP-600M has external dimensions of 399.0 x 202.0 x 301.0mm ( 15.7 x 7.9 x 11.8inch) whereas Q Acoustics 3030i has external dimensions of 325.0 x 200.0 x 329.0mm ( 12.7 x 7.8 x 12.9inch) .

Q Acoustics 3030i is 2mm narrower and 74mm shorter than Klipsch RP-600M but it is also 28mm deeper.

Below you can see the front view size comparison of Klipsch RP-600M and Q Acoustics 3030i in scale.

Klipsch RP-600M vs Q Acoustics 3030i Size Comparison - Front View
Comparison image of Klipsch RP-600M and Q Acoustics 3030i Size and External Dimensions

Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited. The base surface area of the Klipsch RP-600M is approximately 608.0cm2 / 94.2inch2 and base area of the Q Acoustics 3030i is approximately 658.0cm2 / 102.0inch2. The RP-600M requires 8% less surface area than the 3030i which gives it a small advantage on placement in tight spaces.

Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:

Klipsch RP-600M vs Q Acoustics 3030i Size Comparison on a Media Console
Size Comparison image of Klipsch RP-600M and Q Acoustics 3030i on a Media Console
Weight Comparison

The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Klipsch RP-600M weighs 7.30kg / 16.1lbs and the Q Acoustics 3030i weighs 6.20kg / 13.6lbs. This makes the RP-600M 18% heavier than the 3030i.

Here is a comparison of how RP-600M and 3030i's weights compare with the average, max and min weights in Passive Bookshelf class.

Weight
All Bookshelf Speakers
Klipsch RP-600M
Q Acoustics 3030i
Min
Average
Max

What's in the Box of Klipsch RP-600M?

Here are the items that are included inside the box of RP-600M:
  • 2 Bookshelf loudspeakers
  • 2 Grilles (installed)
  • 8 Self-adhesive rubber feet
  • 4 Terminal jumpers (installed)
  • User Manual
  • Important Safety Instructions
  • Warranty Information
  • What's in the Box of Q Acoustics 3030i?

    Here are the items that come with the 3030i:
  • 2 x 3030i bookshelf speakers
  • 2 x Speaker Grilles
  • 2 x Foam Bungs
  • 1 x User Manual

  • Reasons to choose Klipsch Reference Premiere RP-600M over Q Acoustics 3030i
    Max Input Power 100 watts vs 75 watts Handle more power from your amplifier
    Sensitivity 96 dB vs 88 dB Play louder with same amount of amplification power
    Nominal Impedance 8 ohms vs 6 ohms Less selective with amplifiers
    Low Frequency Response 45 Hz vs 46 Hz Generates deeper bass
    Bi-Amping and Bi-Wiring Yes vs No Allows bi-amping and bi-wiring connections
    Base Surface Area 608cm2 vs 658cm2 Takes less floor space
    Price per pair* 369USD vs 499USD costs less (*prices may change depending on the seller, location and time)

    Reasons to choose Q Acoustics 3030i over Klipsch Reference Premiere RP-600M

    High Frequency Response 30k Hz vs 25k Hz Generates higher frequency
    Height 325mm vs 399mm Easier to fit in smaller spaces
    Klipsch RP-600M vs Q Acoustics 3030i Specs Table
    Detailed comparison of specifications
    General Klipsch Reference Premiere RP-600M Q Acoustics 3030i
    Brand Klipsch Q Acoustics
    Speaker Type Bookshelf speakers Bookshelf speakers
    Power Range up to 100 watts 25-75 watts
    Sensitivity 96 dB 88 dB
    Impedance 8 ohms 6 ohms
    Impedance n/a 4 ohms
    Frequency Response 45-25k Hz 46-30k Hz
    Drivers
    Woofer Quantity 1 1
    Woofer Size 6.5" 6.5"
    Woofer Composition Cerametallic Coated paper
    Woofer Surround Material Rubber Rubber
    Tweeter Size 1" 1"
    Tweeter Type Tractrix Horn decoupled
    Aimable Tweeter No No
    Midrange Driver No No
    Crossover Frequency 1500Hz 2400Hz
    Firing Direction rear rear
    Physical Specs
    Height 399.0mm (15.7") 325.0mm (12.8")
    Width 202.0mm (8") 200.0mm (7.9")
    Depth 301.0mm (11.9") 329.0mm (13")
    Weight 7.30kg (16.1lbs) 6.20kg (13.6lbs)
    Enclosure Bass Reflex Bass Reflex
    Finish MDF/Wood-grain vinyl n/a
    Available Colors Ebony, Walnut, Piano Black Walnut, Black, White
    Mounting Bracket No No
    Recommended Stand Height 22-26" n/a
    Grille Yes Yes
    Moisture Resistancy No No
    Connections
    Biamp Inputs Yes No
    Other
    Parts Warranty 5 Years 4 Years
    Labor Warranty 5 Years 4 Years

    Most Popular Speakers
    Klipsch Reference R-51M
    Klipsch R-51M
    2-way | 93 dB | 8 ohms
    Wharfedale Elysian 2
    Wharfedale Elysian 2
    3-way | 89 dB | 4 ohms
    ELAC Debut 2.0 B6.2
    ELAC Debut 2.0 B6.2
    2-way | 87 dB | 6 ohms
    Bowers & Wilkins 606 S2 Anniversary Edition
    B&W 606 S2
    2-way | 88 dB | 8 ohms
    KEF Q150
    KEF Q150
    2-way | 86 dB | 8 ohms
    Klipsch Reference Premiere RP-500M
    Klipsch RP-500M
    2-way | 93 dB | 8 ohms
    Wharfedale EVO4.1
    Wharfedale EVO4.1
    2-way | 87 dB | 8 ohms
    Bowers & Wilkins 606
    B&W 606
    2-way | 88 dB | 8 ohms
    Copyright © 2025 by SpeakerDecision
    About Privacy Contact US Camera Decision

    Report a Correction