In this review, we will be comparing RP-600M and Bronze 2, two Passive Bookshelf speakers from Klipsch and Monitor Audio. Let's have a brief look at the main features
of Klipsch RP-600M and Monitor Audio Bronze 2 first before getting into our more
detailed comparison.
What size room are the Klipsch RP-600M and Monitor Audio Bronze 2 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Klipsch RP-600M and Monitor Audio Bronze 2 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both RP-600M and Bronze 2 are 2-way speakers.
Driver |
Klipsch RP-600M |
Monitor Audio Bronze 2 |
Driver Setup
|
2-way
|
2-way
|
Tweeter
|
1-inch
|
1-inch
|
Midrange
|
- |
- |
Woofer
|
1 x 6.5-inch
|
1 x 6.5-inch
|
RP-600M features a 1" Tractrix Horn Tweeter and 1 x 6.5" Cerametallic Woofer with a Crossover frequency at 1500Hz. On the other hand, the Bronze 2 features a 1" Dome Tweeter and 1 x 6.5" C-CAM Woofer with a Crossover frequency at 3100Hz.
Frequency Response
RP-600M has a frequency range of 45-25k Hz whereas Bronze 2 has a frequency range of 42-30k Hz. With a minimum frequency of 42Hz, the Bronze 2 can go slightly deeper then the RP-600M's min frequency of 45Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
RP-600M and Bronze 2 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. RP-600M sensitivity is rated at 96 dB and the Bronze 2's is at 90 dB. This 6 dB difference makes the Klipsch RP-600M a more sensitive speaker compared to Monitor Audio Bronze 2, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both RP-600M and Bronze 2 features dual binding post speaker terminals for bi-amping or bi-wiring.
Cabinet Type and Port Position
RP-600M has a rear firing port whereas Bronze 2 has a front firing ports. Monitor Audio Bronze 2's front-firing port gives more flexibility in placement in regards to proximity to walls compared to Klipsch RP-600M with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch RP-600M's and Monitor Audio Bronze 2's external dimensions. Klipsch RP-600M has external dimensions of 399.0 x 202.0 x 301.0mm ( 15.7 x 7.9 x 11.8inch) whereas Monitor Audio Bronze 2 has external dimensions of 350.0 x 185.0 x 281.0mm ( 13.7 x 7.2 x 11.0inch) .
Klipsch RP-600M is clearly the larger of the two speakers. Its body is 17mm wider, 49mm taller and 20mm deeper than Monitor Audio Bronze 2.
Below you can see the front view size comparison of Klipsch RP-600M and Monitor Audio Bronze 2 in scale.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch RP-600M is approximately 608.0cm2 / 94.2inch2 and base area of the Monitor Audio Bronze 2 is approximately 519.9cm2 / 80.6inch2. The RP-600M requires 17% more surface area than the Bronze 2 which gives it a small disadvantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Klipsch RP-600M weighs 7.30kg / 16.1lbs and the Monitor Audio Bronze 2 weighs 5.30kg / 11.7lbs. This makes the RP-600M 38% heavier than the Bronze 2.
Here is a comparison of how RP-600M and Bronze 2's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Klipsch RP-600M?
Here are the items that are included inside the box of RP-600M:
2 Bookshelf loudspeakers2 Grilles (installed)8 Self-adhesive rubber feet4 Terminal jumpers (installed)User ManualImportant Safety InstructionsWarranty Information
What's in the Box of Monitor Audio Bronze 2?
Here are the items that come with the Bronze 2:
2 Bookshelf loudspeakers 2 Grilles 2 Foam port plugs Hex-key Owner's Manual Important Safety Instructions
Sensitivity |
96 dB
vs
90 dB
|
Play louder with same amount of amplification power |
Low Frequency Response |
42 Hz
vs
45 Hz
|
Generates deeper bass |
High Frequency Response |
30k Hz
vs
25k Hz
|
Generates higher frequency |
Port Position |
Front
vs
Rear
|
Gives more flexibility placing close to walls |
Height |
350mm
vs
399mm
|
Easier to fit in smaller spaces |
Base Surface Area |
519cm2 (185x281mm)
vs
608cm2 (202x301mm)
|
Takes less floor space |
General |
Klipsch Reference Premiere RP-600M |
Monitor Audio Bronze 2 |
Brand |
Klipsch |
Monitor Audio |
Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
Power Range |
up to 100 watts |
30-100 watts |
Sensitivity |
96 dB |
90 dB |
Impedance |
8 ohms |
8 ohms |
Frequency Response |
45-25k Hz |
42-30k Hz |
Drivers |
|
|
Woofer Quantity |
1 |
1 |
Woofer Size |
6.5" |
6.5" |
Woofer Composition |
Cerametallic |
C-CAM |
Woofer Surround Material |
Rubber |
Rubber |
Tweeter Size |
1" |
1" |
Tweeter Type |
Tractrix Horn |
Dome |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
No |
Crossover Frequency |
1500Hz |
3100Hz |
Firing Direction |
rear |
front |
Physical Specs |
|
|
Height |
399.0mm (15.7") |
350.0mm (13.8") |
Width |
202.0mm (8") |
185.0mm (7.3") |
Depth |
301.0mm (11.9") |
281.0mm (11.1") |
Weight |
7.30kg (16.1lbs) |
5.30kg (11.7lbs) |
Enclosure |
Bass Reflex |
Bass Reflex |
Finish |
MDF/Wood-grain vinyl |
MDF/Wood-grain vinyl |
Available Colors |
Ebony, Walnut, Piano Black |
Walnut, White, Rosemah, Black |
Mounting Bracket |
No |
No |
Recommended Stand Height |
22-26" |
30-31" |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
Yes |
Yes |
Other |
|
|
Parts Warranty |
5 Years |
5 Years |
Labor Warranty |
5 Years |
5 Years |