In this review, we will be comparing RP-600M and Chorus 706, two Passive Bookshelf speakers from Klipsch and Focal. Let's have a brief look at the main features
of Klipsch RP-600M and Focal Chorus 706 first before getting into our more
detailed comparison.
What size room are the Klipsch RP-600M and Focal Chorus 706 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Klipsch RP-600M and Focal Chorus 706 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both RP-600M and Chorus 706 are 2-way speakers.
Driver |
Klipsch RP-600M |
Focal Chorus 706 |
Driver Setup
|
2-way
|
2-way
|
Tweeter
|
1-inch
|
1-inch
|
Midrange
|
- |
- |
Woofer
|
1 x 6.5-inch
|
1 x 6.5-inch
|
RP-600M features a 1" Tractrix Horn Tweeter and 1 x 6.5" Cerametallic Woofer with a Crossover frequency at 1500Hz. On the other hand, the Chorus 706 features a 1" TNV2 AI/Mg inverted dome Tweeter and 1 x 6.5" Polyglass Woofer with a Crossover frequency at 3000Hz.
Frequency Response
RP-600M has a frequency range of 45-25k Hz whereas Chorus 706 has a frequency range of 55-28k Hz. With a minimum frequency of 45Hz, the RP-600M can go significantly deeper on the low side and provide stronger bass compared to the Chorus 706's min frequency of 55Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
RP-600M and Chorus 706 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. RP-600M sensitivity is rated at 96 dB and the Chorus 706's is at 90 dB. This 6 dB difference makes the Klipsch RP-600M a more sensitive speaker compared to Focal Chorus 706, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
RP-600M can handle a max power of 120 watts RMS from the amp the whereas RP-600M has a max power handling value of 100 watts RMS , 20 watts less than the Chorus 706.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
RP-600M features Dual binding posts/bi-wire/bi-amp posts which make bi-amping or bi-wiring possible. Chorus 706 has a Binding post which doesn't feature bi-amping/bi-wiring.
Cabinet Type and Port Position
RP-600M has a rear firing port whereas Chorus 706 has a front firing ports. Focal Chorus 706's front-firing port gives more flexibility in placement in regards to proximity to walls compared to Klipsch RP-600M with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch RP-600M's and Focal Chorus 706's external dimensions. Klipsch RP-600M has external dimensions of 399.0 x 202.0 x 301.0mm ( 15.7 x 7.9 x 11.8inch) whereas Focal Chorus 706 has external dimensions of 390.0 x 220.0 x 263.0mm ( 15.4 x 8.7 x 10.4inch) .
Focal Chorus 706 is 9mm shorter and 38mm less deeper than Klipsch RP-600M but it is also 18mm wider.
Below you can see the front view size comparison of Klipsch RP-600M and Focal Chorus 706 in scale.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch RP-600M is approximately 608.0cm2 / 94.2inch2 and base area of the Focal Chorus 706 is approximately 578.6cm2 / 89.7inch2. The RP-600M requires 5% more surface area than the Chorus 706 which gives it a small disadvantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Klipsch RP-600M weighs 7.30kg / 16.1lbs and the Focal Chorus 706 weighs 8.20kg / 18lbs. This makes the Chorus 706 12% heavier than the RP-600M.
Here is a comparison of how RP-600M and Chorus 706's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Klipsch RP-600M?
Here are the items that are included inside the box of RP-600M:
2 Bookshelf loudspeakers2 Grilles (installed)8 Self-adhesive rubber feet4 Terminal jumpers (installed)User ManualImportant Safety InstructionsWarranty Information
What's in the Box of Focal Chorus 706?
Here are the items that come with the Chorus 706:
2 Bookshelf loudspeakers 2 Cloth grilles (attached) User manual
Sensitivity |
96 dB
vs
90 dB
|
Play louder with same amount of amplification power |
Low Frequency Response |
45 Hz
vs
55 Hz
|
Generates deeper bass |
Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
Max Input Power |
120 watts
vs
100 watts
|
Handle more power from your amplifier |
High Frequency Response |
28k Hz
vs
25k Hz
|
Generates higher frequency |
Port Position |
Front
vs
Rear
|
Gives more flexibility placing close to walls |
Height |
390mm
vs
399mm
|
Easier to fit in smaller spaces |
Base Surface Area |
578cm2 (220x263mm)
vs
608cm2 (202x301mm)
|
Takes less floor space |
General |
Klipsch Reference Premiere RP-600M |
Focal Chorus 706 |
Brand |
Klipsch |
Focal |
Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
Power Range |
up to 100 watts |
25 - 120 watts |
Sensitivity |
96 dB |
90 dB |
Impedance |
8 ohms |
8 ohms |
Impedance |
n/a |
3.6 ohms |
Frequency Response |
45-25k Hz |
55-28k Hz |
Drivers |
|
|
Woofer Quantity |
1 |
1 |
Woofer Size |
6.5" |
6.5" |
Woofer Composition |
Cerametallic |
Polyglass |
Woofer Surround Material |
Rubber |
Rubber |
Tweeter Size |
1" |
1" |
Tweeter Type |
Tractrix Horn |
inverted dome |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
No |
Crossover Frequency |
1500Hz |
3000Hz |
Firing Direction |
rear |
front |
Physical Specs |
|
|
Height |
399.0mm (15.7") |
390.0mm (15.4") |
Width |
202.0mm (8") |
220.0mm (8.7") |
Depth |
301.0mm (11.9") |
263.0mm (10.4") |
Weight |
7.30kg (16.1lbs) |
8.20kg (18lbs) |
Enclosure |
Bass Reflex |
Bass Reflex |
Finish |
MDF/Wood-grain vinyl |
Lacquer/Leatherette |
Available Colors |
Ebony, Walnut, Piano Black |
Rosewood, Walnut, Black |
Mounting Bracket |
No |
No |
Recommended Stand Height |
22-26" |
24-26" |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
Yes |
No |
Other |
|
|
Parts Warranty |
5 Years |
5 |
Labor Warranty |
5 Years |
5 |