In this review, we will be comparing Chorus 706 and Q150, two Passive Bookshelf speakers from Focal and KEF.
Let's have a brief look at the main features
of Focal Chorus 706 and KEF Q150 first before getting into our more
detailed comparison.
Focal Chorus 706 Key Specs
- 2-way Design
- 1" inverted dome Tweeter
- 6.5" Polyglass Woofer
- 55-28k Hz Frequency Response
- 90 dB Sensitivity
- Impedance: 8ohms
- Power Range:25 - 120watts
- Weight:8.20kg
- Dimensions (H x W x D): 390.0" x 8.7" x 10.4"( 390.0 x 220.0 x 263.0mm )
KEF Q150 Key Specs
- 2-way Design
- 11th Generation Uni-Q Driver
- 1" Dome Tweeter
- 5.25" Aluminum Woofer
- 51-28k Hz Frequency Response
- 86 dB Sensitivity
- Impedance: 8ohms
- Power Range:10-100watts
- Weight:5.60kg
- Dimensions (H x W x D): 303.0" x 7.0" x 10.9"( 303.0 x 180.0 x 278.0mm )
What size room are the Focal Chorus 706 and KEF Q150 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Focal Chorus 706 |
KEF Q150 |
| Near-field |
Poor |
Average |
| Small Room |
Average |
Good |
| Mid-size Room |
Good |
Average |
| Large Room |
Average |
Poor |
| Very Large Room |
Poor |
Bad |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Focal Chorus 706 and KEF Q150 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Chorus 706 and Q150 are 2-way speakers.
| Driver |
Focal Chorus 706 |
KEF Q150 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 6.5-inch
|
1 x 5.25-inch
|
Chorus 706 features a 1" TNV2 AI/Mg inverted dome Tweeter and 1 x 6.5" Polyglass Woofer with a Crossover frequency at 3000Hz. On the other hand, the Q150 features a 1" vented aluminum Dome Tweeter and 1 x 5.25" Aluminum Woofer with a Crossover frequency at 2500Hz.
Frequency Response
Chorus 706 has a frequency range of 55-28k Hz whereas Q150 has a frequency range of 51-28k Hz. With a minimum frequency of 51Hz, the Q150 can go slightly deeper then the Chorus 706's min frequency of 55Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Chorus 706 and Q150 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. Chorus 706 sensitivity is rated at 90 dB and the Q150's is at 86 dB. This 4 dB difference makes the Focal Chorus 706 a more sensitive speaker compared to KEF Q150, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
Chorus 706 can handle a max power of 120 watts RMS from the amp the whereas Q150 has a max power handling value of 100 watts RMS, 20 watts less than the Chorus 706.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Chorus 706 features Post type posts and Q150 has a Post type posts. None of these speakers feature bi-amping/bi-wiring.
KEF Q150's Post terminals
Cabinet Type and Port Position
Chorus 706 has a front firing port whereas Q150 has a rear firing ports. Focal Chorus 706's front-firing port gives more flexibility in placement in regards to proximity to walls compared to KEF Q150 with its rear-firing port.
KEF Q150 Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Focal Chorus 706's and KEF Q150's external dimensions. Focal Chorus 706 has external dimensions of 390.0 x 220.0 x 263.0mm ( 15.4 x 8.7 x 10.4inch) whereas KEF Q150 has external dimensions of 303.0 x 180.0 x 278.0mm ( 11.9 x 7.0 x 10.9inch) .
KEF Q150 is 40mm narrower and 87mm shorter than Focal Chorus 706 but it is also 15mm deeper.
Below you can see the front view size comparison of Focal Chorus 706 and KEF Q150 in scale.
Comparison image of Focal Chorus 706 and KEF Q150 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Focal Chorus 706 is approximately 578.6cm2 / 89.7inch2 and base area of the KEF Q150 is approximately 500.4cm2 / 77.6inch2. The Chorus 706 requires 16% more surface area than the Q150 which gives it a small disadvantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Size Comparison image of Focal Chorus 706 and KEF Q150 on a Media Console
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Focal Chorus 706 weighs 8.20kg / 18lbs and the KEF Q150 weighs 5.60kg / 12.3lbs. This makes the Chorus 706 46% heavier than the Q150.
Here is a comparison of how Chorus 706 and Q150's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Focal Chorus 706?
Here are the items that are included inside the box of Chorus 706:
2 Bookshelf loudspeakers 2 Cloth grilles (attached) User manual
What's in the Box of KEF Q150?
Here are the items that come with the Q150:
2 Bookshelf loudspeakers 2 Foam port plugs 8 Self-adhesive rubber feet Owner's Manual Warranty Registration Card
 Max Input Power |
120 watts
vs
100 watts
|
Handle more power from your amplifier |
 Sensitivity |
90 dB
vs
86 dB
|
Play louder with same amount of amplification power |
 Woofer Size |
6.5 inches
vs
5.25 inches
|
Larger woofer |
 Port Position |
Front
vs
Rear
|
Gives more flexibility placing close to walls |
 Minimum Impedance |
3.7 ohms
vs
3.6 ohms
|
Very low impedance levels puts more pressure on amplifier |
|
Low Frequency Response |
51 Hz
vs
55 Hz
|
Generates deeper bass |
 Height |
303mm
vs
390mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
500cm2
vs
578cm2
|
Takes less floor space |
| General |
Focal Chorus 706 |
KEF Q150 |
| Brand |
Focal |
KEF |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
25 - 120 watts |
10-100 watts |
| Sensitivity |
90 dB |
86 dB |
| Impedance |
8 ohms |
8 ohms |
| Impedance |
3.6 ohms |
3.7 ohms |
| Frequency Response |
55-28k Hz |
51-28k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
6.5" |
5.25" |
| Woofer Composition |
Polyglass |
Aluminum |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
inverted dome |
Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
3000Hz |
2500Hz |
| Firing Direction |
front |
rear |
Physical Specs |
|
|
| Height |
390.0mm (15.4") |
303.0mm (11.9") |
| Width |
220.0mm (8.7") |
180.0mm (7.1") |
| Depth |
263.0mm (10.4") |
278.0mm (10.9") |
| Weight |
8.20kg (18lbs) |
5.60kg (12.3lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
Lacquer/Leatherette |
MDF/Vinyl-wrapped |
| Available Colors |
Rosewood, Walnut, Black |
Black, Walnut, White |
| Mounting Bracket |
No |
No |
| Recommended Stand Height |
24-26" |
18-24" |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
No |
Other |
|
|
| Parts Warranty |
5 |
5 Years |
| Labor Warranty |
5 |
5 Years |