In this review, we will be comparing Debut 2.0 F6.2 and RP-280F, two Passive Floor-standing speakers from ELAC and Klipsch.
Let's have a brief look at the main features
of ELAC Debut 2.0 F6.2 and Klipsch RP-280F first before getting into our more
detailed comparison.
| Key Specs | ELAC Debut 2.0 F6.2 | Klipsch RP-280F |
|---|
| Brand | ELAC
Germany · founded 1926 | Klipsch
United States · founded 1946 |
|---|
| Design | 3-way | 2-way |
|---|
| Tweeter | 1" dome with wide-dispersion waveguide | 1" Tractrix Horn |
|---|
| Midrange | 6.5" | — |
|---|
| Woofer | 2 x 6.5" Woven Aramid-Fiber | 2 x 8" Cerametallic |
|---|
| Frequency response | 39-35k Hz | 32-25k Hz |
|---|
| Sensitivity | 87 dB | 98 dB |
|---|
| Impedance | 6 ohms | 8 ohms |
|---|
| Power range | up to 140 watts | up to 150 watts |
|---|
| Weight | 19.95kg / 43.9lbs | 28.41kg / 62.5lbs |
|---|
| Dimensions (H x W x D) | 44-5/16" x 8-1/8" x 11-5/8"
1126.0 x 207.0 x 296.0mm | 43-1/16" x 10-9/16" x 17-3/8"
1094.0 x 269.0 x 442.0mm |
|---|
What size room are the ELAC Debut 2.0 F6.2 and Klipsch RP-280F speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
ELAC Debut 2.0 F6.2 |
Klipsch RP-280F |
| Near-field |
Bad |
Bad |
| Small Room |
Poor |
Poor |
| Mid-size Room |
Good |
Good |
| Large Room |
Good |
Good |
| Very Large Room |
Poor |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
Drivers
One of the fundamental differences between these two speakers is that Debut 2.0 F6.2 is a 3-way design whereas the RP-280F is a 2-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
ELAC Debut 2.0 F6.2Klipsch RP-280F
TweeterMidrangeWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
ELAC Debut 2.0 F6.2 |
Klipsch RP-280F |
|
Driver Setup
|
3-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
1 x 6.5-inch |
- |
|
Woofer
|
2 x 6.5-inch
|
2 x 8-inch
|
Debut 2.0 F6.2 features a 1" silk dome with wide-dispersion waveguide Tweeter, a 6.5" Midrange and 2 x 6.5" Woven Aramid-Fiber Woofer with a Crossover frequency at 90Hz and 2200Hz. On the other hand, the RP-280F features a 1" Tractrix Horn Tweeter and 2 x 8" Cerametallic Woofer with a Crossover frequency at 1750 Hz.
Frequency Response
Debut 2.0 F6.2 has a frequency range of 39-35k Hz whereas RP-280F has a frequency range of 32-25k Hz. With a minimum frequency of 32Hz, the RP-280F can go significantly deeper on the low side and provide stronger bass compared to the Debut 2.0 F6.2's min frequency of 39Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Debut 2.0 F6.2 is a 6 ohms speaker compared to the RP-280F which has a nominal impedance of 8 ohms.
These two speakers also have different sensitivity levels. Debut 2.0 F6.2 sensitivity is rated at 87 dB and the RP-280F's is rated at 98 dB. This 11 dB difference makes the Klipsch RP-280F a more sensitive speaker compared to ELAC Debut 2.0 F6.2, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. Staying
within that range gives nominal performance; driving the speaker beyond its maximum wattage can damage it.
RP-280F can handle a max power of 150 watts RMS, whereas Debut 2.0 F6.2 has a max power handling value of 140 watts RMS, 10 watts less than the RP-280F.
Note that higher power handling does not make a speaker louder: that depends mainly on
sensitivity and impedance. The calculator below shows how loud each of these actually plays
on a real amplifier.
Which plays louder on your amplifier?
Starting with a popular amplifier - change it to the one you own, or any you are
considering, and watch both numbers move.
Input Type and Bi-Amping / Bi-Wiring
RP-280F features Binding post posts which make bi-amping or bi-wiring possible. Debut 2.0 F6.2 has a 5-Way post which doesn't feature bi-amping/bi-wiring.
ELAC Debut 2.0 F6.2's 5-Way post terminals
Klipsch RP-280F's Binding post terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
Both Debut 2.0 F6.2 and RP-280F have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare ELAC Debut 2.0 F6.2's and Klipsch RP-280F's external dimensions. ELAC Debut 2.0 F6.2 has external dimensions of 1126.0 x 207.0 x 296.0mm (44-5/16 x 8-1/8 x 11-5/8inch) whereas Klipsch RP-280F has external dimensions of 1094.0 x 269.0 x 442.0mm (43-1/16 x 10-9/16 x 17-3/8inch).
ELAC Debut 2.0 F6.2 is 62mm narrower and 146mm less deeper than Klipsch RP-280F but it is also 32mm taller.
Below you can see the front view size comparison of ELAC Debut 2.0 F6.2 and Klipsch RP-280F in scale.
Comparison image of ELAC Debut 2.0 F6.2 and Klipsch RP-280F Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the ELAC Debut 2.0 F6.2 is approximately 612.7cm2 / 95.0inch2 and base area of the Klipsch RP-280F is approximately 1189.0cm2 / 184.3inch2. The Debut 2.0 F6.2 requires 48% less surface area than the RP-280F which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The ELAC Debut 2.0 F6.2 weighs 19.95kg / 43.9lbs and the Klipsch RP-280F weighs 28.41kg / 62.5lbs. This makes the RP-280F 42% heavier than the Debut 2.0 F6.2.
Here is a comparison of how Debut 2.0 F6.2 and RP-280F's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of ELAC Debut 2.0 F6.2?
Here are the items that are included inside the box of Debut 2.0 F6.2:
- Floorstanding loudspeaker
- Grille
- 4 Spikes (hex-nuts attached)
- Operating Instructions
What's in the Box of Klipsch RP-280F?
Here are the items that come with the RP-280F:
- Floorstanding loudspeaker (Ebony)
- Speaker base
- Detachable magnetic grille
- Four 1-inch #6 Wood screws
- 4 Spike feet
- 6 Rubber feet
- User Manual
- Warranty Information
- Important Safety Instructions
 Driver Setup |
3-way
vs
2-way
|
Have a dedicated mid-range driver |
 High Frequency Response |
35k Hz
vs
25k Hz
|
Generates higher frequency |
 Dolby Atmos Drivers |
Optional
vs
No
|
Dolby Atmos Compatibility |
 Base Surface Area |
612cm2
vs
1189cm2
|
Takes less floor space |
 Price per pair* |
1060USD
vs
1198USD
|
costs less (*prices may change depending on the seller, location and time) |
 Max Input Power |
150 watts
vs
140 watts
|
Handle more power from your amplifier |
 Sensitivity |
98 dB
vs
87 dB
|
Play louder with same amount of amplification power |
 Nominal Impedance |
8 ohms
vs
6 ohms
|
Less selective with amplifiers |
 Woofer Size |
8 inches
vs
6.5 inches
|
Larger woofer |
|
Low Frequency Response |
32 Hz
vs
39 Hz
|
Generates deeper bass |
 Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
 Height |
1094mm
vs
1126mm
|
Easier to fit in smaller spaces |
| General |
ELAC Debut 2.0 F6.2 |
Klipsch Reference Premiere RP-280F |
| Brand |
ELAC |
Klipsch |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
up to 140 watts |
up to 150 watts |
| Sensitivity |
87 dB |
98 dB |
| Impedance |
6 ohms |
8 ohms |
| Frequency Response |
39-35k Hz |
32-25k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
2 |
| Woofer Size |
6.5" |
8" |
| Woofer Composition |
Woven Aramid-Fiber |
Cerametallic |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
dome with wide-dispersion waveguide |
Tractrix Horn |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
6.5" |
No |
| Crossover Frequency |
90Hz and 2200Hz |
1750 Hz |
| Firing Direction |
rear |
rear |
Physical Specs |
|
|
| Height |
1126.0mm (44.3") |
1094.0mm (43.1") |
| Width |
207.0mm (8.1") |
269.0mm (10.6") |
| Depth |
296.0mm (11.7") |
442.0mm (17.4") |
| Weight |
19.95kg (43.9lbs) |
28.41kg (62.5lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Vinyl |
MDF/Wood-grain vinyl |
| Available Colors |
Black |
Walnut, Black |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
Yes |
Other |
|
|
| Parts Warranty |
3 Years |
5 Years |
| Labor Warranty |
3 Years |
5 Years |
No single best speaker here - they are built to different priorities, and the right one depends on your room, your amplifier and what you listen to.
| Area | Better | Why |
|---|
| Bass | B | Klipsch RP-280F digs deeper - 32Hz against 39Hz. A subwoofer would even that out. |
| Amplifier needs | B | Klipsch RP-280F is more sensitive (98dB vs 87dB), so it goes louder on the same amplifier. |
| Amplifier match | B | Klipsch RP-280F is the easier load at 8 ohms. |
| Headroom | evenly matched | Similar power handling (140W vs 150W). |
| Size | depends | ELAC Debut 2.0 F6.2 is easier to place; Klipsch RP-280F is bigger, which usually goes with fuller bass. Your room decides. |
| Expandability | depends | ELAC Debut 2.0 F6.2: Atmos drivers; Klipsch RP-280F: bi-amping. Klipsch RP-280F sits in a wider range (17 models), so a matched surround system is easier later. |
| Price | A | ELAC Debut 2.0 F6.2 is cheaper - $1,060 against $1,198, about 12% less. |
A ELAC Debut 2.0 F6.2 B Klipsch RP-280F
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both speakers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
Klipsch RP-280F leads across most of the measured areas for a fairly modest premium, which makes it the easier pick if the budget stretches. ELAC Debut 2.0 F6.2 is the one to take if it does not. If a subwoofer is in your plans, the bass gap largely stops mattering - you would be crossing over above 39Hz anyway, which makes the cheaper ELAC Debut 2.0 F6.2 much easier to justify. In a large or open-plan room, Klipsch RP-280F has the cabinet volume to fill it more easily; in a small room, near a wall or at desk distance, ELAC Debut 2.0 F6.2 is the easier speaker to get right.
And remember what a spec sheet cannot show: how each looks in your room and whether the finish suits it, what dealer support and warranty are like where you live, and how they actually sound to you. If you can hear them first - ideally with your own music - that will tell you more than any number above.