In this review, we will be comparing Debut 2.0 B6.2 and EVO4.2, two Passive Bookshelf speakers from ELAC and Wharfedale.
Let's have a brief look at the main features
of ELAC Debut 2.0 B6.2 and Wharfedale EVO4.2 first before getting into our more
detailed comparison.
ELAC Debut 2.0 B6.2 Key Specs
- 2-way Design
- 1" Soft-Dome Tweeter
- 6.5" Woven Aramid-Fiber Woofer
- 44-35k Hz Frequency Response
- 87 dB Sensitivity
- Impedance: 6ohms
- Power Range:up to 120watts
- Weight:7.40kg
- Dimensions (H x W x D): 375.0" x 7-3/4" x 11-5/16"( 375.0 x 195.0 x 268.0mm )
Wharfedale EVO4.2 Key Specs
- 3-way Design
- 1.18x2.36" AMT (Ribbon) Tweeter
- 2" Midrange
- 6.5" Kevlar Woofer
- 2" Midrange
- 54-22k Hz Frequency Response
- 88 dB Sensitivity
- Impedance: 8ohms
- Power Range:25-120watts
- Weight:13.40kg
- Dimensions (H x W x D): 455.0" x 9.8" x 13.7"( 455.0 x 250.0 x 350.0mm )
What size room are the ELAC Debut 2.0 B6.2 and Wharfedale EVO4.2 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
ELAC Debut 2.0 B6.2 |
Wharfedale EVO4.2 |
| Near-field |
Poor |
Poor |
| Small Room |
Average |
Average |
| Mid-size Room |
Good |
Good |
| Large Room |
Average |
Average |
| Very Large Room |
Poor |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the ELAC Debut 2.0 B6.2 and Wharfedale EVO4.2 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that Debut 2.0 B6.2 is a 2-way design whereas the EVO4.2 is a 3-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
ELAC Debut 2.0 B6.2 |
Wharfedale EVO4.2 |
|
Driver Setup
|
2-way
|
3-way
|
|
Tweeter
|
1-inch
|
1.18x2.36-inch
|
|
Midrange
|
- |
1 x 2-inch |
|
Woofer
|
1 x 6.5-inch
|
1 x 6.5-inch
|
Debut 2.0 B6.2 features a 1" Cloth Soft-Dome Tweeter and 1 x 6.5" Woven Aramid-Fiber Woofer with a Crossover frequency at 2200Hz. On the other hand, the EVO4.2 features a 1.18x2.36" AMT (Ribbon) Tweeter , a 2" Midrange and 1 x 6.5" Kevlar Woofer .
Frequency Response
Debut 2.0 B6.2 has a frequency range of 44-35k Hz whereas EVO4.2 has a frequency range of 54-22k Hz. With a minimum frequency of 44Hz, the Debut 2.0 B6.2 can go significantly deeper on the low side and provide stronger bass compared to the EVO4.2's min frequency of 54Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Debut 2.0 B6.2 is a 6 ohms speaker compared to the EVO4.2 which has a nominal impedance of 8 ohms.
These two speakers also have different sensitivity levels. Debut 2.0 B6.2 sensitivity is rated at 87 dB and the EVO4.2's is rated at 88 dB. This 1 dB difference makes the Wharfedale EVO4.2 a more sensitive speaker compared to ELAC Debut 2.0 B6.2, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
EVO4.2 features Post posts which make bi-amping or bi-wiring possible. Debut 2.0 B6.2 has a 5-Way post which doesn't feature bi-amping/bi-wiring.
ELAC Debut 2.0 B6.2's 5-Way post terminals
Cabinet Type and Port Position
Debut 2.0 B6.2 has a front firing port whereas EVO4.2 has a bottom firing ports. ELAC Debut 2.0 B6.2's front-firing port gives more flexibility in placement in regards to proximity to walls compared to Wharfedale EVO4.2 with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare ELAC Debut 2.0 B6.2's and Wharfedale EVO4.2's external dimensions. ELAC Debut 2.0 B6.2 has external dimensions of 375.0 x 195.0 x 268.0mm ( 14.7 x 7.6 x 10.5inch) whereas Wharfedale EVO4.2 has external dimensions of 455.0 x 250.0 x 350.0mm ( 17.9 x 9.8 x 13.7inch) .
Wharfedale EVO4.2 is clearly the larger of the two speakers. Its body is 55mm wider, 80mm taller and 82mm deeper than ELAC Debut 2.0 B6.2.
Below you can see the front view size comparison of ELAC Debut 2.0 B6.2 and Wharfedale EVO4.2 in scale.
Comparison image of ELAC Debut 2.0 B6.2 and Wharfedale EVO4.2 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the ELAC Debut 2.0 B6.2 is approximately 522.6cm2 / 81.0inch2 and base area of the Wharfedale EVO4.2 is approximately 875.0cm2 / 135.6inch2. The Debut 2.0 B6.2 requires 40% less surface area than the EVO4.2 which gives it a small advantage on placement in tight spaces.