In this review, we will be comparing Debut 2.0 B6.2 and Q350, two Passive Bookshelf speakers from ELAC and KEF. Let's have a brief look at the main features
of ELAC Debut 2.0 B6.2 and KEF Q350 first before getting into our more
detailed comparison.
What size room are the ELAC Debut 2.0 B6.2 and KEF Q350 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the ELAC Debut 2.0 B6.2 and KEF Q350 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Debut 2.0 B6.2 and Q350 are 2-way speakers.
Driver |
ELAC Debut 2.0 B6.2 |
KEF Q350 |
Driver Setup
|
2-way
|
2-way
|
Tweeter
|
1-inch
|
1-inch
|
Midrange
|
- |
- |
Woofer
|
1 x 6.5-inch
|
1 x 6.5-inch
|
Debut 2.0 B6.2 features a 1" Cloth Soft-Dome Tweeter and 1 x 6.5" Woven Aramid-Fiber Woofer with a Crossover frequency at 2200Hz. On the other hand, the Q350 features a 1" vented aluminum Dome Tweeter and 1 x 6.5" Aluminum Woofer with a Crossover frequency at 2500Hz.
Frequency Response
Debut 2.0 B6.2 has a frequency range of 44-35k Hz whereas Q350 has a frequency range of 63-28k Hz. With a minimum frequency of 44Hz, the Debut 2.0 B6.2 can go significantly deeper on the low side and provide stronger bass compared to the Q350's min frequency of 63Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Debut 2.0 B6.2 is a 6 ohms speaker compared to the Q350 which has a nominal impedance of 8 ohms.
On the other hand, they have the same sensitivity of 87 dBdB.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Debut 2.0 B6.2 features Post type posts and Q350 has a Post type posts. None of these speakers feature bi-amping/bi-wiring.
Cabinet Type and Port Position
Debut 2.0 B6.2 has a front firing port whereas Q350 has a rear firing ports. ELAC Debut 2.0 B6.2's front-firing port gives more flexibility in placement in regards to proximity to walls compared to KEF Q350 with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare ELAC Debut 2.0 B6.2's and KEF Q350's external dimensions. ELAC Debut 2.0 B6.2 has external dimensions of 375.0 x 195.0 x 268.0mm ( 14.7 x 7.6 x 10.5inch) whereas KEF Q350 has external dimensions of 358.0 x 210.0 x 306.0mm ( 14.0 x 8.2 x 12.0inch) .
ELAC Debut 2.0 B6.2 is 15mm narrower and 38mm less deeper than KEF Q350 but it is also 17mm taller.
Below you can see the front view size comparison of ELAC Debut 2.0 B6.2 and KEF Q350 in scale.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the ELAC Debut 2.0 B6.2 is approximately 522.6cm2 / 81.0inch2 and base area of the KEF Q350 is approximately 642.6cm2 / 99.6inch2. The Debut 2.0 B6.2 requires 19% less surface area than the Q350 which gives it a small advantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The ELAC Debut 2.0 B6.2 weighs 7.40kg / 16.3lbs and the KEF Q350 weighs 7.60kg / 16.7lbs. This makes the Q350 3% heavier than the Debut 2.0 B6.2.
Here is a comparison of how Debut 2.0 B6.2 and Q350's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of ELAC Debut 2.0 B6.2?
Here are the items that are included inside the box of Debut 2.0 B6.2:
2 Bookshelf loudspeakers2 GrillesOperating Instructions
What's in the Box of KEF Q350?
Here are the items that come with the Q350:
2 Bookshelf loudspeakers 2 Foam port plugs 8 Self-adhesive rubber feet Owner's Manual Warranty Registration Card
Low Frequency Response |
44 Hz
vs
63 Hz
|
Generates deeper bass |
High Frequency Response |
35k Hz
vs
28k Hz
|
Generates higher frequency |
Port Position |
Front
vs
Rear
|
Gives more flexibility placing close to walls |
Base Surface Area |
522cm2 (195x268mm)
vs
642cm2 (210x306mm)
|
Takes less floor space |
Price per pair* |
400USD
vs
750USD
|
costs less (*prices may change depending on the seller, location and time) |
Nominal Impedance |
8 ohms
vs
6 ohms
|
Less selective with amplifiers |
Height |
358mm
vs
375mm
|
Easier to fit in smaller spaces |
General |
ELAC Debut 2.0 B6.2 |
KEF Q350 |
Brand |
ELAC |
KEF |
Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
Power Range |
up to 120 watts |
10-120 watts |
Sensitivity |
87 dB |
87 dB |
Impedance |
6 ohms |
8 ohms |
Impedance |
n/a |
3.7 ohms |
Frequency Response |
44-35k Hz |
63-28k Hz |
Drivers |
|
|
Woofer Quantity |
1 |
1 |
Woofer Size |
6.5" |
6.5" |
Woofer Composition |
Woven Aramid-Fiber |
Aluminum |
Woofer Surround Material |
Rubber |
Rubber |
Tweeter Size |
1" |
1" |
Tweeter Type |
Soft-Dome |
Dome |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
No |
Crossover Frequency |
2200Hz |
2500Hz |
Firing Direction |
front |
rear |
Physical Specs |
|
|
Height |
375.0mm (14.8") |
358.0mm (14.1") |
Width |
195.0mm (7.7") |
210.0mm (8.3") |
Depth |
268.0mm (10.6") |
306.0mm (12") |
Weight |
7.40kg (16.3lbs) |
7.60kg (16.7lbs) |
Enclosure |
Ported |
Bass Reflex |
Finish |
MDF/Vinyl |
MDF/Vinyl-wrapped |
Available Colors |
Black |
Black, Walnut, White |
Mounting Bracket |
No |
No |
Recommended Stand Height |
24-28" |
18-24" |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
No |
No |
Other |
|
|
Parts Warranty |
3 Years |
5 Years |
Labor Warranty |
3 Years |
5 Years |