In this review, we will be comparing Debut 2.0 B5.2 and RP-600M, two Passive Bookshelf speakers from ELAC and Klipsch.
Let's have a brief look at the main features
of ELAC Debut 2.0 B5.2 and Klipsch RP-600M first before getting into our more
detailed comparison.
ELAC Debut 2.0 B5.2 Key Specs
- 2-way Design
- 1" Soft-dome Tweeter
- 5.25" Woven Aramid-Fiber Woofer
- 46-35k Hz Frequency Response
- 86 dB Sensitivity
- Impedance: 6ohms
- Power Range:120watts
- Weight:5.90kg
- Dimensions (H x W x D): 341.0" x 7.0" x 9.2"( 341.0 x 180.0 x 234.0mm )
Klipsch RP-600M Key Specs
- 2-way Design
- 1" Tractrix Horn Tweeter
- 6.5" Cerametallic Woofer
- 45-25k Hz Frequency Response
- 96 dB Sensitivity
- Impedance: 8ohms
- Power Range:up to 100watts
- Weight:7.30kg
- Dimensions (H x W x D): 399.0" x 7.9" x 11.8"( 399.0 x 202.0 x 301.0mm )
What size room are the ELAC Debut 2.0 B5.2 and Klipsch RP-600M speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
ELAC Debut 2.0 B5.2 |
Klipsch RP-600M |
| Near-field |
Poor |
Average |
| Small Room |
Average |
Good |
| Mid-size Room |
Good |
Average |
| Large Room |
Average |
Poor |
| Very Large Room |
Poor |
Bad |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the ELAC Debut 2.0 B5.2 and Klipsch RP-600M compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Debut 2.0 B5.2 and RP-600M are 2-way speakers.
| Driver |
ELAC Debut 2.0 B5.2 |
Klipsch RP-600M |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 5.25-inch
|
1 x 6.5-inch
|
Debut 2.0 B5.2 features a 1" Cloth Soft-dome Tweeter and 1 x 5.25" Woven Aramid-Fiber Woofer with a Crossover frequency at 2200Hz. On the other hand, the RP-600M features a 1" Tractrix Horn Tweeter and 1 x 6.5" Cerametallic Woofer with a Crossover frequency at 1500Hz.
Frequency Response
Debut 2.0 B5.2 has a frequency range of 46-35k Hz whereas RP-600M has a frequency range of 45-25k Hz. With a minimum frequency of 45Hz, the RP-600M can go slightly deeper then the Debut 2.0 B5.2's min frequency of 46Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Debut 2.0 B5.2 is a 6 ohms speaker compared to the RP-600M which has a nominal impedance of 8 ohms.
These two speakers also have different sensitivity levels. Debut 2.0 B5.2 sensitivity is rated at 86 dB and the RP-600M's is rated at 96 dB. This 10 dB difference makes the Klipsch RP-600M a more sensitive speaker compared to ELAC Debut 2.0 B5.2, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
Debut 2.0 B5.2 can handle a max power of 120 watts RMS from the amp the whereas RP-600M has a max power handling value of 100 watts RMS, 20 watts less than the Debut 2.0 B5.2.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
RP-600M features Dual binding posts/bi-wire/bi-amp posts which make bi-amping or bi-wiring possible. Debut 2.0 B5.2 has a 5-Way Metal post which doesn't feature bi-amping/bi-wiring.
ELAC Debut 2.0 B5.2's 5-Way Metal post terminals
Klipsch RP-600M's Dual binding posts/bi-wire/bi-amp terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
Debut 2.0 B5.2 has a front firing port whereas RP-600M has a rear firing ports. ELAC Debut 2.0 B5.2's front-firing port gives more flexibility in placement in regards to proximity to walls compared to Klipsch RP-600M with its rear-firing port.
Klipsch RP-600M Tractrix horn-shaped Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare ELAC Debut 2.0 B5.2's and Klipsch RP-600M's external dimensions. ELAC Debut 2.0 B5.2 has external dimensions of 341.0 x 180.0 x 234.0mm ( 13.4 x 7.0 x 9.2inch) whereas Klipsch RP-600M has external dimensions of 399.0 x 202.0 x 301.0mm ( 15.7 x 7.9 x 11.8inch) .
Klipsch RP-600M is clearly the larger of the two speakers. Its body is 22mm wider, 58mm taller and 67mm deeper than ELAC Debut 2.0 B5.2.
Below you can see the front view size comparison of ELAC Debut 2.0 B5.2 and Klipsch RP-600M in scale.
Comparison image of ELAC Debut 2.0 B5.2 and Klipsch RP-600M Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the ELAC Debut 2.0 B5.2 is approximately 421.2cm2 / 65.3inch2 and base area of the Klipsch RP-600M is approximately 608.0cm2 / 94.2inch2. The Debut 2.0 B5.2 requires 31% less surface area than the RP-600M which gives it a small advantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Size Comparison image of ELAC Debut 2.0 B5.2 and Klipsch RP-600M on a Media Console