In this review, we will be comparing RP-600M and RP-600M, two Passive Bookshelf speakers by Klipsch.
Let's have a brief look at the main features
of Klipsch RP-600M and Klipsch RP-600M first before getting into our more
detailed comparison.
| Key Specs | Klipsch RP-600M | Klipsch RP-600M |
|---|
| Brand | Klipsch
United States · founded 1946 | Klipsch
United States · founded 1946 |
|---|
| Design | 2-way | 2-way |
|---|
| Tweeter | 1" Tractrix Horn | 1" Tractrix Horn |
|---|
| Woofer | 6.5" Cerametallic | 6.5" Cerametallic |
|---|
| Frequency response | 45-25k Hz | 45-25k Hz |
|---|
| Sensitivity | 96 dB | 96 dB |
|---|
| Impedance | 8 ohms | 8 ohms |
|---|
| Power range | up to 100 watts | up to 100 watts |
|---|
| Weight | 7.30kg / 16.1lbs | 7.30kg / 16.1lbs |
|---|
| Dimensions (H x W x D) | 15.7" x 7.9" x 11.8"
399.0 x 202.0 x 301.0mm | 15.7" x 7.9" x 11.8"
399.0 x 202.0 x 301.0mm |
|---|
RP-600M and RP-600M are members of Klipsch's Reference Premiere (RP) series of speakers. Below you can find the loudspeakers from this series.
Klipsch Reference Premiere (RP) Series
History
What size room are the Klipsch RP-600M and Klipsch RP-600M speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Klipsch RP-600M |
Klipsch RP-600M |
| Near-field |
Average |
Average |
| Small Room |
Good |
Good |
| Mid-size Room |
Average |
Average |
| Large Room |
Poor |
Poor |
| Very Large Room |
Bad |
Bad |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
Drivers
Both RP-600M and RP-600M are 2-way speakers.
Klipsch RP-600MKlipsch RP-600M
TweeterWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
Klipsch RP-600M |
Klipsch RP-600M |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 6.5-inch
|
1 x 6.5-inch
|
RP-600M features a 1" Tractrix Horn Tweeter and 1 x 6.5" Cerametallic Woofer with a Crossover frequency at 1500Hz. On the other hand, the RP-600M features a 1" Tractrix Horn Tweeter and 1 x 6.5" Cerametallic Woofer with a Crossover frequency at 1500Hz.
Frequency Response
RP-600M and RP-600M has exactly the same frequency range of 45-25k Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
RP-600M and RP-600M have the same Impedance of 8 ohms and their sensitivity is also same at 96 dB.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. Staying
within that range gives nominal performance; driving the speaker beyond its maximum wattage can damage it.
RP-600M and RP-600M have the same power range of up to 100 watts.
Note that higher power handling does not make a speaker louder: that depends mainly on
sensitivity and impedance. The calculator below shows how loud each of these actually plays
on a real amplifier.
Which plays louder on your amplifier?
Starting with a popular amplifier - change it to the one you own, or any you are
considering, and watch both numbers move.
Input Type and Bi-Amping / Bi-Wiring
Both RP-600M and RP-600M features dual binding post speaker terminals for bi-amping or bi-wiring.
Klipsch RP-600M's Dual binding posts/bi-wire/bi-amp terminals allows Bi-amping or bi-wiring
Klipsch RP-600M's Dual binding posts/bi-wire/bi-amp terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
Both RP-600M and RP-600M have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Klipsch RP-600M Tractrix horn-shaped Port
Klipsch RP-600M Tractrix horn-shaped Port
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch RP-600M's and Klipsch RP-600M's external dimensions. Klipsch RP-600M has external dimensions of 399.0 x 202.0 x 301.0mm (15.7 x 7.9 x 11.8inch) whereas Klipsch RP-600M has external dimensions of 399.0 x 202.0 x 301.0mm (15.7 x 7.9 x 11.8inch).
In this case, we can see that Klipsch RP-600M and Klipsch RP-600M have the exact same height, width and thickness.
Below you can see the front view size comparison of Klipsch RP-600M and Klipsch RP-600M in scale.
Comparison image of Klipsch RP-600M and Klipsch RP-600M Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch RP-600M is approximately 608.0cm2 / 94.2inch2 and base area of the Klipsch RP-600M is approximately 608.0cm2 / 94.2inch2.
Here is another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Size Comparison image of Klipsch RP-600M and Klipsch RP-600M on a Media Console
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Klipsch RP-600M weighs 7.30kg / 16.1lbs and the Klipsch RP-600M weighs 7.30kg / 16.1lbs.
Here is a comparison of how RP-600M and RP-600M's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Klipsch RP-600M?
Here are the items that are included inside the box of RP-600M:
- 2 Bookshelf loudspeakers
- 2 Grilles (installed)
- 8 Self-adhesive rubber feet
- 4 Terminal jumpers (installed)
- User Manual
- Important Safety Instructions
- Warranty Information
What's in the Box of Klipsch RP-600M?
Here are the items that come with the RP-600M:
- 2 Bookshelf loudspeakers
- 2 Grilles (installed)
- 8 Self-adhesive rubber feet
- 4 Terminal jumpers (installed)
- User Manual
- Important Safety Instructions
- Warranty Information
| General |
Klipsch Reference Premiere RP-600M |
Klipsch Reference Premiere RP-600M |
| Brand |
Klipsch |
Klipsch |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
up to 100 watts |
up to 100 watts |
| Sensitivity |
96 dB |
96 dB |
| Impedance |
8 ohms |
8 ohms |
| Frequency Response |
45-25k Hz |
45-25k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
6.5" |
6.5" |
| Woofer Composition |
Cerametallic |
Cerametallic |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Tractrix Horn |
Tractrix Horn |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
1500Hz |
1500Hz |
| Firing Direction |
rear |
rear |
Physical Specs |
|
|
| Height |
399.0mm (15.7") |
399.0mm (15.7") |
| Width |
202.0mm (8") |
202.0mm (8") |
| Depth |
301.0mm (11.9") |
301.0mm (11.9") |
| Weight |
7.30kg (16.1lbs) |
7.30kg (16.1lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Wood-grain vinyl |
MDF/Wood-grain vinyl |
| Available Colors |
Ebony, Walnut, Piano Black |
Ebony, Walnut, Piano Black |
| Mounting Bracket |
No |
No |
| Recommended Stand Height |
22-26" |
22-26" |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |
Siblings in Klipsch's Reference Premiere (RP) series, so they share a family sound. It comes down to size, output and price.
| Area | Better | Why |
|---|
| Bass | evenly matched | Much the same reach (45Hz vs 45Hz). |
| Amplifier needs | evenly matched | Similar sensitivity (96dB vs 96dB) - both want much the same power. |
| Headroom | evenly matched | Similar power handling (100W vs 100W). |
| Size | depends | Similar cabinet size - neither is easier to fit. |
| Expandability | depends | Klipsch RP-600M: bi-amping; Klipsch RP-600M: bi-amping. |
| Price | evenly matched | Much the same money ($459 vs $459 a pair). |
A Klipsch RP-600M B Klipsch RP-600M
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both speakers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
Neither runs away with it - they trade advantages. Let the "depends" rows and your own room settle it.
And remember what a spec sheet cannot show: how each looks in your room and whether the finish suits it, what dealer support and warranty are like where you live, and how they actually sound to you. If you can hear them first - ideally with your own music - that will tell you more than any number above.