In this review, we will be comparing Bronze 1 and Motion 35XTi, two Passive Bookshelf speakers from Monitor Audio and MartinLogan.
Let's have a brief look at the main features
of Monitor Audio Bronze 1 and MartinLogan 35XTi first before getting into our more
detailed comparison.
| Key Specs | Monitor Audio Bronze 1 | MartinLogan 35XTi |
|---|
| Brand | Monitor Audio
United Kingdom · founded 1972 | MartinLogan
United States · founded 1982 |
|---|
| Design | 2-way | 2-way |
|---|
| Tweeter | 1" Dome | 1.25 x 2.4" Folded Motion XT |
|---|
| Woofer | 5.5" C-CAM | 6.5" Aluminum |
|---|
| Frequency response | 55-30k Hz | 50-25k Hz |
|---|
| Sensitivity | 88 dB | 92 dB |
|---|
| Impedance | 8 ohms | 4 ohms |
|---|
| Power range | 20-70 watts | 20-250 watts |
|---|
| Weight | 3.50kg / 7.7lbs | 8.40kg / 18.5lbs |
|---|
| Dimensions (H x W x D) | 10.2" x 6.4" x 8.0"
260.0 x 165.0 x 205.0mm | 13.5" x 7.5" x 11.8"
343.0 x 192.0 x 300.0mm |
|---|
What size room are the Monitor Audio Bronze 1 and MartinLogan 35XTi speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Monitor Audio Bronze 1 |
MartinLogan 35XTi |
| Near-field |
Good |
Poor |
| Small Room |
Good |
Poor |
| Mid-size Room |
Average |
Good |
| Large Room |
Poor |
Good |
| Very Large Room |
No way |
Average |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
Drivers
Both Bronze 1 and Motion 35XTi are 2-way speakers.
Monitor Audio Bronze 1MartinLogan 35XTi
TweeterWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
Monitor Audio Bronze 1 |
MartinLogan 35XTi |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1.25 x 2.4-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 5.5-inch
|
1 x 6.5-inch
|
Bronze 1 features a 1" Dome Tweeter and 1 x 5.5" C-CAM Woofer with a Crossover frequency at 2700Hz. On the other hand, the Motion 35XTi features a 1.25 x 2.4" Folded Motion XT Tweeter and 1 x 6.5" Aluminum Woofer with a Crossover frequency at 2200Hz.
Frequency Response
Bronze 1 has a frequency range of 55-30k Hz whereas Motion 35XTi has a frequency range of 50-25k Hz. With a minimum frequency of 50Hz, the Motion 35XTi can go significantly deeper on the low side and provide stronger bass compared to the Bronze 1's min frequency of 55Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Bronze 1 is a 8 ohms speaker compared to the Motion 35XTi which has a nominal impedance of 4 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the Motion 35XTi can provide this impedance level.
These two speakers also have different sensitivity levels. Bronze 1 sensitivity is rated at 88 dB and the Motion 35XTi's is rated at 92 dB. This 4 dB difference makes the MartinLogan 35XTi a more sensitive speaker compared to Monitor Audio Bronze 1, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. Staying
within that range gives nominal performance; driving the speaker beyond its maximum wattage can damage it.
Motion 35XTi can handle a max power of 250 watts RMS, whereas Bronze 1 has a max power handling value of 70 watts RMS, 180 watts less than the Motion 35XTi.
Note that higher power handling does not make a speaker louder: that depends mainly on
sensitivity and impedance. The calculator below shows how loud each of these actually plays
on a real amplifier.
Which plays louder on your amplifier?
Starting with a popular amplifier - change it to the one you own, or any you are
considering, and watch both numbers move.
Input Type and Bi-Amping / Bi-Wiring
Motion 35XTi features Custom 5-way bi-wire tool-less binding posts posts which make bi-amping or bi-wiring possible. Bronze 1 has a Post which doesn't feature bi-amping/bi-wiring.
Monitor Audio Bronze 1's Post terminals
MartinLogan 35XTi's Custom 5-way bi-wire tool-less binding posts terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
Both Bronze 1 and Motion 35XTi have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Monitor Audio Bronze 1 Port
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Monitor Audio Bronze 1's and MartinLogan 35XTi's external dimensions. Monitor Audio Bronze 1 has external dimensions of 260.0 x 165.0 x 205.0mm (10.2 x 6.4 x 8.0inch) whereas MartinLogan 35XTi has external dimensions of 343.0 x 192.0 x 300.0mm (13.5 x 7.5 x 11.8inch).
MartinLogan 35XTi is clearly the larger of the two speakers. Its body is 27mm wider, 83mm taller and 95mm deeper than Monitor Audio Bronze 1.
Size, drawn to scale
Both speakers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same surface and pushed back to the same wall, so the deeper one visibly sticks out further.
MartinLogan 35XTi needs about 70% more floor or shelf area. MartinLogan 35XTi is 95mm deeper, so it stands that much further out from the wall. MartinLogan 35XTi is 83mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Monitor Audio Bronze 1 is approximately 338.3cm2 / 52.4inch2 and base area of the MartinLogan 35XTi is approximately 576.0cm2 / 89.3inch2. The Bronze 1 requires 41% less surface area than the Motion 35XTi which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Monitor Audio Bronze 1 weighs 3.50kg / 7.7lbs and the MartinLogan 35XTi weighs 8.40kg / 18.5lbs. This makes the Motion 35XTi 140% heavier than the Bronze 1.
Here is a comparison of how Bronze 1 and Motion 35XTi's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Monitor Audio Bronze 1?
Here are the items that are included inside the box of Bronze 1:
- 2 Bookshelf loudspeakers
- 2 Grilles
- 2 Foam port plugs
- Hex-key
- Owner's Manual
- Important Safety Instructions
What's in the Box of MartinLogan 35XTi?
Here are the items that come with the Motion 35XTi:
- Bookshelf loudspeaker
- Grille
- 4 Rubber feet
- 2 Jumper-straps (pre-installed)
- Users Manual
- Warranty/Registration Information
 Nominal Impedance |
8 ohms
vs
4 ohms
|
Less selective with amplifiers |
 High Frequency Response |
30k Hz
vs
25k Hz
|
Generates higher frequency |
 Height |
260mm
vs
343mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
338cm2
vs
576cm2
|
Takes less floor space |
 Price per pair* |
299USD
vs
1500USD
|
costs less (*prices may change depending on the seller, location and time) |
 Max Input Power |
250 watts
vs
70 watts
|
Handle more power from your amplifier |
 Sensitivity |
92 dB
vs
88 dB
|
Play louder with same amount of amplification power |
 Woofer Size |
6.5 inches
vs
5.5 inches
|
Larger woofer |
|
Low Frequency Response |
50 Hz
vs
55 Hz
|
Generates deeper bass |
 Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
| General |
Monitor Audio Bronze 1 |
MartinLogan Motion 35XTi |
| Brand |
Monitor Audio |
MartinLogan |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
20-70 watts |
20-250 watts |
| Sensitivity |
88 dB |
92 dB |
| Impedance |
8 ohms |
4 ohms |
| Frequency Response |
55-30k Hz |
50-25k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
5.5" |
6.5" |
| Woofer Composition |
C-CAM |
Aluminum |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1.25 x 2.4" |
| Tweeter Type |
Dome |
Folded Motion XT |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
2700Hz |
2200Hz |
| Firing Direction |
rear |
rear |
| Suggested Break-in Period |
n/a |
Allow 72 hours of break-in at 90 dB |
Physical Specs |
|
|
| Height |
260.0mm (10.2") |
343.0mm (13.5") |
| Width |
165.0mm (6.5") |
192.0mm (7.6") |
| Depth |
205.0mm (8.1") |
300.0mm (11.8") |
| Weight |
3.50kg (7.7lbs) |
8.40kg (18.5lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Wood-grain vinyl |
MDF/Lacquer |
| Available Colors |
Walnut, White, Rosemah, Black |
Gloss Black, Matt White, Red Walnut |
| Mounting Bracket |
No |
No |
| Recommended Stand Height |
30-31" |
24-26" |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |
These sit in different price classes - MartinLogan 35XTi costs roughly 5x what Monitor Audio Bronze 1 does. Expect it to lead on paper; the question is whether the gap is audible enough in your room to be worth it.
| Area | Better | Why |
|---|
| Bass | B | MartinLogan 35XTi digs deeper - 50Hz against 55Hz. A subwoofer would even that out. |
| Amplifier needs | B | MartinLogan 35XTi is more sensitive (92dB vs 88dB), so it goes louder on the same amplifier. |
| Amplifier match | A | Monitor Audio Bronze 1 is the easier load at 8 ohms; the other is 4 ohms and wants an amplifier rated for it. |
| Headroom | B | MartinLogan 35XTi takes more power (250W vs 70W) - more in hand in a big room. |
| Size | depends | Monitor Audio Bronze 1 is easier to place; MartinLogan 35XTi is bigger, which usually goes with fuller bass. Your room decides. |
| Expandability | B | MartinLogan 35XTi: bi-amping. MartinLogan 35XTi sits in a wider range (18 models), so a matched surround system is easier later. |
| Price | A | Monitor Audio Bronze 1 is cheaper - $299 against $1,500, about 80% less; arguably a different class. |
A Monitor Audio Bronze 1 B MartinLogan 35XTi
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both speakers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
The usual trade-off: MartinLogan 35XTi measures better, Monitor Audio Bronze 1 costs about about 5x the price% less. Whether that gap is worth the money is the call only you can make - and in a normal room it is often smaller than the numbers suggest. If a subwoofer is in your plans, the bass gap largely stops mattering - you would be crossing over above 55Hz anyway, which makes the cheaper Monitor Audio Bronze 1 much easier to justify. Match it to your room: we rate Monitor Audio Bronze 1 the better fit for near-field listening and a small room, and MartinLogan 35XTi for a mid-size room and a large room.
And remember what a spec sheet cannot show: how each looks in your room and whether the finish suits it, what dealer support and warranty are like where you live, and how they actually sound to you. If you can hear them first - ideally with your own music - that will tell you more than any number above.