In this review, we will be comparing Elysian 2 and RP-600M, two Passive Bookshelf speakers from Wharfedale and Klipsch.
Let's have a brief look at the main features
of Wharfedale Elysian 2 and Klipsch RP-600M first before getting into our more
detailed comparison.
Wharfedale Elysian 2 Key Specs
- 3-way Design
- 27x90mm" AMT (Ribbon) Tweeter
- 6" Midrange
- 8.5" Coated Fiberglass Woofer
- 35-22k Hz Frequency Response
- 89 dB Sensitivity
- Impedance: 4ohms
- Power Range:25-250watts
- Weight:30.50kg
- Dimensions (H x W x D): 700.0" x 13.1" x 18.1"( 700.0 x 334.0 x 462.0mm )
Klipsch RP-600M Key Specs
- 2-way Design
- 1" Tractrix Horn Tweeter
- 6.5" Cerametallic Woofer
- 45-25k Hz Frequency Response
- 96 dB Sensitivity
- Impedance: 8ohms
- Power Range:up to 100watts
- Weight:7.30kg
- Dimensions (H x W x D): 399.0" x 7.9" x 11.8"( 399.0 x 202.0 x 301.0mm )
What size room are the Wharfedale Elysian 2 and Klipsch RP-600M speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Wharfedale Elysian 2 |
Klipsch RP-600M |
| Near-field |
Poor |
Average |
| Small Room |
Poor |
Good |
| Mid-size Room |
Good |
Average |
| Large Room |
Good |
Poor |
| Very Large Room |
Average |
Bad |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Wharfedale Elysian 2 and Klipsch RP-600M compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that Elysian 2 is a 3-way design whereas the RP-600M is a 2-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
Wharfedale Elysian 2 |
Klipsch RP-600M |
|
Driver Setup
|
3-way
|
2-way
|
|
Tweeter
|
27x90mm-inch
|
1-inch
|
|
Midrange
|
1 x 6-inch |
- |
|
Woofer
|
1 x 8.5-inch
|
1 x 6.5-inch
|
Elysian 2 features a 27x90mm" AMT (Ribbon) Tweeter , a 6" Midrange and 1 x 8.5" Coated Fiberglass Woofer with a Crossover frequency at 360Hz and 2900Hz. On the other hand, the RP-600M features a 1" Tractrix Horn Tweeter and 1 x 6.5" Cerametallic Woofer with a Crossover frequency at 1500Hz.
Frequency Response
Elysian 2 has a frequency range of 35-22k Hz whereas RP-600M has a frequency range of 45-25k Hz. With a minimum frequency of 35Hz, the Elysian 2 can go significantly deeper on the low side and provide stronger bass compared to the RP-600M's min frequency of 45Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Elysian 2 is a 4 ohms speaker compared to the RP-600M which has a nominal impedance of 8 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the Elysian 2 can provide this impedance level.
These two speakers also have different sensitivity levels. Elysian 2 sensitivity is rated at 89 dB and the RP-600M's is rated at 96 dB. This 7 dB difference makes the Klipsch RP-600M a more sensitive speaker compared to Wharfedale Elysian 2, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
Elysian 2 can handle a max power of 250 watts RMS from the amp the whereas RP-600M has a max power handling value of 100 watts RMS, 150 watts less than the Elysian 2.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both Elysian 2 and RP-600M features dual binding post speaker terminals for bi-amping or bi-wiring.
Wharfedale Elysian 2's Post terminals allows Bi-amping or bi-wiring
Klipsch RP-600M's Dual binding posts/bi-wire/bi-amp terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
Elysian 2 has a bottom firing port whereas RP-600M has a rear firing ports. Wharfedale Elysian 2's bottom-firing port gives more flexibility in placement in regards to proximity to walls compared to Klipsch RP-600M with its rear-firing port.
Klipsch RP-600M Tractrix horn-shaped Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Wharfedale Elysian 2's and Klipsch RP-600M's external dimensions. Wharfedale Elysian 2 has external dimensions of 700.0 x 334.0 x 462.0mm ( 27.5 x 13.1 x 18.1inch) whereas Klipsch RP-600M has external dimensions of 399.0 x 202.0 x 301.0mm ( 15.7 x 7.9 x 11.8inch) .
Wharfedale Elysian 2 is clearly the larger of the two speakers. Its body is 132mm wider, 301mm taller and 161mm deeper than Klipsch RP-600M.
Below you can see the front view size comparison of Wharfedale Elysian 2 and Klipsch RP-600M in scale.
Comparison image of Wharfedale Elysian 2 and Klipsch RP-600M Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Wharfedale Elysian 2 is approximately 1543.1cm2 / 239.2inch2 and base area of the Klipsch RP-600M is approximately 608.0cm2 / 94.2inch2. The Elysian 2 requires 154% more surface area than the RP-600M which gives it a small disadvantage on placement in tight spaces.