In this review, we will be comparing EVO4.2 and RTi A1, two Passive Bookshelf speakers from Wharfedale and Polk Audio.
Let's have a brief look at the main features
of Wharfedale EVO4.2 and Polk RTi A1 first before getting into our more
detailed comparison.
| Key Specs | Wharfedale EVO4.2 | Polk RTi A1 |
|---|
| Brand | Wharfedale
United Kingdom · founded 1932 | Polk Audio
United States · founded 1972 |
|---|
| Design | 3-way | 2-way |
|---|
| Tweeter | 1.18x2.36" AMT (Ribbon) | 1" Dome |
|---|
| Midrange | 2" | — |
|---|
| Woofer | 6.5" Kevlar | 5.25" Polymer composite |
|---|
| Frequency response | 54-22k Hz | 60-26k Hz |
|---|
| Sensitivity | 88 dB | 89 dB |
|---|
| Impedance | 8 ohms | 8 ohms |
|---|
| Power range | 25-120 watts | 20-125 watts |
|---|
| Weight | 13.40kg / 29.5lbs | 5.44kg / 12lbs |
|---|
| Dimensions (H x W x D) | 17.9" x 9.8" x 13.7"
455.0 x 250.0 x 350.0mm | 12.0" x 7.3" x 11.5"
304.8 x 187.5 x 292.1mm |
|---|
What size room are the Wharfedale EVO4.2 and Polk RTi A1 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Wharfedale EVO4.2 |
Polk RTi A1 |
| Near-field |
Poor |
Poor |
| Small Room |
Average |
Average |
| Mid-size Room |
Good |
Good |
| Large Room |
Average |
Average |
| Very Large Room |
Poor |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
Drivers
One of the fundamental differences between these two speakers is that EVO4.2 is a 3-way design whereas the RTi A1 is a 2-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
Wharfedale EVO4.2Polk RTi A1
TweeterMidrangeWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
Wharfedale EVO4.2 |
Polk RTi A1 |
|
Driver Setup
|
3-way
|
2-way
|
|
Tweeter
|
1.18x2.36-inch
|
1-inch
|
|
Midrange
|
1 x 2-inch |
- |
|
Woofer
|
1 x 6.5-inch
|
1 x 5.25-inch
|
EVO4.2 features a 1.18x2.36" AMT (Ribbon) Tweeter, a 2" Midrange and 1 x 6.5" Kevlar Woofer. On the other hand, the RTi A1 features a 1" silk polymer composite Dome Tweeter and 1 x 5.25" Polymer composite Woofer with a Crossover frequency at 1900Hz.
Frequency Response
EVO4.2 has a frequency range of 54-22k Hz whereas RTi A1 has a frequency range of 60-26k Hz. With a minimum frequency of 54Hz, the EVO4.2 can go significantly deeper on the low side and provide stronger bass compared to the RTi A1's min frequency of 60Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
EVO4.2 and RTi A1 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. EVO4.2 sensitivity is rated at 88 dB and the RTi A1's is at 89 dB. This 1 dB difference makes the Polk RTi A1 a more sensitive speaker compared to Wharfedale EVO4.2, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. Staying
within that range gives nominal performance; driving the speaker beyond its maximum wattage can damage it.
RTi A1 can handle a max power of 125 watts RMS, whereas EVO4.2 has a max power handling value of 120 watts RMS, 5 watts less than the RTi A1.
Note that higher power handling does not make a speaker louder: that depends mainly on
sensitivity and impedance. The calculator below shows how loud each of these actually plays
on a real amplifier.
Which plays louder on your amplifier?
Starting with a popular amplifier - change it to the one you own, or any you are
considering, and watch both numbers move.
Input Type and Bi-Amping / Bi-Wiring
Both EVO4.2 and RTi A1 features dual binding post speaker terminals for bi-amping or bi-wiring.
Cabinet Type and Port Position
EVO4.2 has a bottom firing port whereas RTi A1 has a back and front firing ports.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Wharfedale EVO4.2's and Polk RTi A1's external dimensions. Wharfedale EVO4.2 has external dimensions of 455.0 x 250.0 x 350.0mm (17.9 x 9.8 x 13.7inch) whereas Polk RTi A1 has external dimensions of 304.8 x 187.5 x 292.1mm (12.0 x 7.3 x 11.5inch).
Wharfedale EVO4.2 is clearly the larger of the two speakers. Its body is 62.5mm wider, 150.2mm taller and 57.9mm deeper than Polk RTi A1.
Below you can see the front view size comparison of Wharfedale EVO4.2 and Polk RTi A1 in scale.
Comparison image of Wharfedale EVO4.2 and Polk RTi A1 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Wharfedale EVO4.2 is approximately 875.0cm2 / 135.6inch2 and base area of the Polk RTi A1 is approximately 547.7cm2 / 84.9inch2. The EVO4.2 requires 60% more surface area than the RTi A1 which gives it a small disadvantage on placement in tight spaces.
Here is another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Size Comparison image of Wharfedale EVO4.2 and Polk RTi A1 on a Media Console
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Wharfedale EVO4.2 weighs 13.40kg / 29.5lbs and the Polk RTi A1 weighs 5.44kg / 12lbs. This makes the EVO4.2 146% heavier than the RTi A1.
Here is a comparison of how EVO4.2 and RTi A1's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Wharfedale EVO4.2?
Here are the items that are included inside the box of EVO4.2:
- 2 Bookshelf loudspeakers
- 2 Grilles
- 4 Jumper-bars (pre-installed)
- 8 Self-adhesive rubber feet
- Pair of white cloth gloves
- User Manual
What's in the Box of Polk RTi A1?
Here are the items that come with the RTi A1:
- 2 Cherry bookshelf speakers
- 2 Self-tapping screws
- 8 Self-adhesive rubber feet
- Owner's Manual
- Template
- Online registration sheet
- Polk Audio product brochure
 Driver Setup |
3-way
vs
2-way
|
Have a dedicated mid-range driver |
 Woofer Size |
6.5 inches
vs
5.25 inches
|
Larger woofer |
|
Low Frequency Response |
54 Hz
vs
60 Hz
|
Generates deeper bass |
 Max Input Power |
125 watts
vs
120 watts
|
Handle more power from your amplifier |
 Sensitivity |
89 dB
vs
88 dB
|
Play louder with same amount of amplification power |
 High Frequency Response |
26k Hz
vs
22k Hz
|
Generates higher frequency |
 Mounting Bracket |
Yes
vs
No
|
Allows mounting on walls |
 Height |
304mm
vs
455mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
547cm2
vs
875cm2
|
Takes less floor space |
 Price per pair* |
382USD
vs
1199USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Wharfedale EVO4.2 |
Polk Audio RTi A1 |
| Brand |
Wharfedale |
Polk Audio |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
25-120 watts |
20-125 watts |
| Sensitivity |
88 dB |
89 dB |
| Impedance |
8 ohms |
8 ohms |
| Impedance |
4 ohms |
n/a |
| Frequency Response |
54-22k Hz |
60-26k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
6.5" |
5.25" |
| Woofer Composition |
Kevlar |
Polymer composite |
| Woofer Surround Material |
Rubber |
Butyl rubber |
| Tweeter Size |
1.18x2.36" |
1" |
| Tweeter Type |
AMT (Ribbon) |
Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
2" |
No |
| Crossover Frequency |
n/a |
1900Hz |
| Firing Direction |
bottom |
back and front |
Physical Specs |
|
|
| Height |
455.0mm (17.9") |
304.8mm (12") |
| Width |
250.0mm (9.8") |
187.5mm (7.4") |
| Depth |
350.0mm (13.8") |
292.1mm (11.5") |
| Weight |
13.40kg (29.5lbs) |
5.44kg (12lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Wood-veneer |
Real wood veneer |
| Available Colors |
Walnut,Black,White |
Black, Cherry |
| Mounting Bracket |
No |
Keyhole |
| Recommended Stand Height |
18-22" |
28-36" |
| Grille |
Yes |
n/a |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |
These sit in different price classes - Wharfedale EVO4.2 costs roughly 3.1x what Polk RTi A1 does. Expect it to lead on paper; the question is whether the gap is audible enough in your room to be worth it.
| Area | Better | Why |
|---|
| Bass | A | Wharfedale EVO4.2 digs deeper - 54Hz against 60Hz. A subwoofer would even that out. |
| Amplifier needs | evenly matched | Similar sensitivity (88dB vs 89dB) - both want much the same power. |
| Headroom | evenly matched | Similar power handling (120W vs 125W). |
| Size | depends | Polk RTi A1 is easier to place; Wharfedale EVO4.2 is bigger, which usually goes with fuller bass. Your room decides. |
| Expandability | depends | Wharfedale EVO4.2: bi-amping; Polk RTi A1: bi-amping. Wharfedale EVO4.2 sits in a wider range (7 models), so a matched surround system is easier later. |
| Price | B | Polk RTi A1 is cheaper - $382 against $1,199, about 68% less; arguably a different class. |
A Wharfedale EVO4.2 B Polk RTi A1
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both speakers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
Wharfedale EVO4.2 is ahead, but only on 1 of the measured areas, and it costs about 3.1x the price. That is a lot of money for a narrow margin on paper - Polk RTi A1 looks like the sensible buy unless something else about the Wharfedale EVO4.2 appeals to you. If a subwoofer is in your plans, the bass gap largely stops mattering - you would be crossing over above 60Hz anyway, which makes the cheaper Polk RTi A1 much easier to justify. In a large or open-plan room, Wharfedale EVO4.2 has the cabinet volume to fill it more easily; in a small room, near a wall or at desk distance, Polk RTi A1 is the easier speaker to get right.
And remember what a spec sheet cannot show: how each looks in your room and whether the finish suits it, what dealer support and warranty are like where you live, and how they actually sound to you. If you can hear them first - ideally with your own music - that will tell you more than any number above.