In this review, we will be comparing A1.2 and R3, two Passive Bookshelf speakers from Spendor and KEF.
Let's have a brief look at the main features
of Spendor A1.2 and KEF R3 first before getting into our more
detailed comparison.
| Key Specs | Spendor A1.2 | KEF R3 |
|---|
| Design | 2-way | 3-way |
|---|
| Uni-Q driver | — | 12th Generation Uni-Q |
|---|
| Tweeter | 0.87" | 1" Dome |
|---|
| Midrange | — | 5" |
|---|
| Woofer | 5.91" | 6.5" Hybrid aluminum |
|---|
| Frequency response | 60-26k Hz | 52-28k Hz |
|---|
| Sensitivity | 83 dB | 87 dB |
|---|
| Impedance | 8 ohms | 8 ohms |
|---|
| Power range | — | 15-180 watts |
|---|
| Weight | 4.80kg / 10.6lbs | 13.55kg / 29.8lbs |
|---|
| Dimensions (H x W x D) | 12.1" x 6.5" x 7.3"
307.3 x 165.1 x 185.4mm | 16-5/8" x 7-13/16" x 13-1/4"
423.0 x 199.0 x 337.0mm |
|---|
What size room are the Spendor A1.2 and KEF R3 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Spendor A1.2 |
KEF R3 |
| Near-field |
Good |
Poor |
| Small Room |
Good |
Average |
| Mid-size Room |
Average |
Good |
| Large Room |
Poor |
Average |
| Very Large Room |
No way |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking
through our links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that A1.2 is a 2-way design whereas the R3 is a 3-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
Spendor A1.2KEF R3
TweeterMidrangeWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
Spendor A1.2 |
KEF R3 |
|
Driver Setup
|
2-way
|
3-way
|
|
Tweeter
|
0.87-inch
|
1-inch
|
|
Midrange
|
- |
1 x 5-inch |
|
Woofer
|
1 x 5.91-inch
|
1 x 6.5-inch
|
A1.2 features a 0.87" Tweeter and 1 x 5.91" Woofer with a Crossover frequency at 4.2 kHz. On the other hand, the R3 features a 1" aluminum Dome Tweeter, a 5" Midrange and 1 x 6.5" Hybrid aluminum Woofer with a Crossover frequency at 400Hz and 2900Hz.
Frequency Response
A1.2 has a frequency range of 60-26k Hz whereas R3 has a frequency range of 52-28k Hz. With a minimum frequency of 52Hz, the R3 can go significantly deeper on the low side and provide stronger bass compared to the A1.2's min frequency of 60Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
A1.2 and R3 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. A1.2 sensitivity is rated at 83 dB and the R3's is at 87 dB. This 4 dB difference makes the KEF R3 a more sensitive speaker compared to Spendor A1.2, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Which plays louder on your amplifier?
Starting with a popular amplifier — change it to the one you own, or any you are
considering, and watch both numbers move.
Input Type and Bi-Amping / Bi-Wiring
R3 features Binding post posts which make bi-amping or bi-wiring possible. A1.2 has a Binding post which doesn't feature bi-amping/bi-wiring.
KEF R3 Port
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Spendor A1.2's and KEF R3's external dimensions. Spendor A1.2 has external dimensions of 307.3 x 165.1 x 185.4mm (12.1 x 6.5 x 7.3inch) whereas KEF R3 has external dimensions of 423.0 x 199.0 x 337.0mm (16-5/8 x 7-13/16 x 13-1/4inch).
KEF R3 is clearly the larger of the two speakers. Its body is 33.9mm wider, 115.7mm taller and 151.6mm deeper than Spendor A1.2.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Spendor A1.2 is approximately 306.1cm2 / 47.4inch2 and base area of the KEF R3 is approximately 670.6cm2 / 103.9inch2. The A1.2 requires 54% less surface area than the R3 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Spendor A1.2 weighs 4.80kg / 10.6lbs and the KEF R3 weighs 13.55kg / 29.8lbs. This makes the R3 182% heavier than the A1.2.
Here is a comparison of how A1.2 and R3's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of KEF R3?
Here are the items that come with the R3:
- 2 Bookshelf loudspeakers
- 2 Grilles
- 2 Foam port plugs
- 8 Self-adhesive rubber feet
- User Manual
- Warranty Information
 Minimum Impedance |
6.4 ohms
vs
3.2 ohms
|
Very low impedance levels puts more pressure on amplifier |
 Height |
307mm
vs
423mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
306cm2
vs
670cm2
|
Takes less floor space |
 Driver Setup |
3-way
vs
2-way
|
Have a dedicated mid-range driver |
 Sensitivity |
87 dB
vs
83 dB
|
Play louder with same amount of amplification power |
 Woofer Size |
6.5 inches
vs
5.91 inches
|
Larger woofer |
|
Low Frequency Response |
52 Hz
vs
60 Hz
|
Generates deeper bass |
 High Frequency Response |
28k Hz
vs
26k Hz
|
Generates higher frequency |
 Price per pair* |
2200USD
vs
2399USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Spendor A1.2 |
KEF R3 |
| Brand |
Spendor |
KEF |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Sensitivity |
83 dB |
87 dB |
| Impedance |
8 ohms |
8 ohms |
| Impedance |
6.4 ohms |
3.2 ohms |
| Frequency Response |
60-26k Hz |
52-28k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
5.91" |
6.5" |
| Woofer Composition |
|
Hybrid aluminum |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
0.87" |
1" |
| Tweeter Type |
n/a |
Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
5" |
| Crossover Frequency |
4.2 kHz |
400Hz and 2900Hz |
| Firing Direction |
n/a |
rear |
Physical Specs |
|
|
| Height |
307.3mm (12.1") |
423.0mm (16.7") |
| Width |
165.1mm (6.5") |
199.0mm (7.8") |
| Depth |
185.4mm (7.3") |
337.0mm (13.3") |
| Weight |
4.80kg (10.6lbs) |
13.55kg (29.8lbs) |
| Enclosure |
Acoustic Suspension |
Bass Reflex |
| Finish |
n/a |
MDF/Lacquer |
| Available Colors |
n/a |
Black Gloss, White Gloss, Walnut |
| Mounting Bracket |
|
No |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
n/a |
Yes |
Other |
|
|
| Parts Warranty |
|
5 Years |
| Labor Warranty |
|
5 Years |
A generation apart: Spendor A1.2 is the newer design, against a 2018 model. Newer is not automatically better, but the older one is more likely to be discounted or near run-out.
| Area | Better | Why |
|---|
| Bass |
B |
KEF R3 digs deeper - 52Hz against 60Hz. A subwoofer would even that out. |
| Amplifier needs |
B |
KEF R3 is more sensitive (87dB vs 83dB), so it goes louder on the same amplifier. |
| Size |
depends |
Spendor A1.2 is easier to place; KEF R3 is bigger, which usually goes with fuller bass. Your room decides. |
| Cabinet |
depends |
Sealed vs Ported. Sealed is tighter and happier near a wall; ported digs lower but wants space behind it. |
| Expandability |
B |
KEF R3: bi-amping. |
| Price |
evenly matched |
Much the same money ($2,399 vs $2,200 a pair). |
A Spendor A1.2
B KEF R3
depends neither is better in the abstract - it turns on your room, placement or how you will use them.
Only specs published for both speakers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
KEF R3 has the edge on paper, though the margin is not large. The rows marked "depends" may matter more to you than the score does. If a subwoofer is in your plans, the bass gap largely stops mattering - you would be crossing over above 60Hz anyway, so judge these on the other rows instead. Match it to your room: we rate Spendor A1.2 the better fit for near-field listening and a small room, and KEF R3 for a mid-size room and a large room.
And remember what a spec sheet cannot show: how each looks in your room and whether the finish suits it, what dealer support and warranty are like where you live, and how they actually sound to you. If you can hear them first - ideally with your own music - that will tell you more than any number above.