In this review, we will be comparing M126Be and Bronze 1, two Passive Bookshelf speakers from Revel and Monitor Audio. Let's have a brief look at the main features
of Revel M126Be and Monitor Audio Bronze 1 first before getting into our more
detailed comparison.
What size room are the Revel M126Be and Monitor Audio Bronze 1 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Revel M126Be and Monitor Audio Bronze 1 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both M126Be and Bronze 1 are 2-way speakers.
Driver |
Revel M126Be |
Monitor Audio Bronze 1 |
Driver Setup
|
2-way
|
2-way
|
Tweeter
|
1-inch
|
1-inch
|
Midrange
|
- |
- |
Woofer
|
1 x 6.5-inch
|
1 x 5.5-inch
|
M126Be features a 1" beryllium Hard-Dome Tweeter and 1 x 6.5" DCC Aluminum Woofer . On the other hand, the Bronze 1 features a 1" Dome Tweeter and 1 x 5.5" C-CAM Woofer with a Crossover frequency at 2700Hz.
Frequency Response
M126Be has a frequency range of 54-44k Hz whereas Bronze 1 has a frequency range of 55-30k Hz. With a minimum frequency of 54Hz, the M126Be can go slightly deeper then the Bronze 1's min frequency of 55Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
M126Be and Bronze 1 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. M126Be sensitivity is rated at 86 dB and the Bronze 1's is at 88 dB. This 2 dB difference makes the Monitor Audio Bronze 1 a more sensitive speaker compared to Revel M126Be, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
M126Be can handle a max power of 150 watts RMS from the amp the whereas Bronze 1 has a max power handling value of 70 watts RMS, 80 watts less than the M126Be.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
M126Be features Post type posts and Bronze 1 has a Post type posts. None of these speakers feature bi-amping/bi-wiring.
Cabinet Type and Port Position
Both M126Be and Bronze 1 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Revel M126Be's and Monitor Audio Bronze 1's external dimensions. Revel M126Be has external dimensions of 388.0 x 212.0 x 262.0mm ( 15-1/4 x 8-5/16 x 10-5/16inch) whereas Monitor Audio Bronze 1 has external dimensions of 260.0 x 165.0 x 205.0mm ( 10.2 x 6.4 x 8.0inch) .
Revel M126Be is clearly the larger of the two speakers. Its body is 47mm wider, 128mm taller and 57mm deeper than Monitor Audio Bronze 1.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Revel M126Be is approximately 555.4cm2 / 86.1inch2 and base area of the Monitor Audio Bronze 1 is approximately 338.3cm2 / 52.4inch2. The M126Be requires 64% more surface area than the Bronze 1 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Revel M126Be weighs 10.00kg / 22lbs and the Monitor Audio Bronze 1 weighs 3.50kg / 7.7lbs. This makes the M126Be 186% heavier than the Bronze 1.
Here is a comparison of how M126Be and Bronze 1's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Revel M126Be?
Here are the items that are included inside the box of M126Be:
Bookshelf loudspeakerGrilleFoam port plugOwners Manual
What's in the Box of Monitor Audio Bronze 1?
Here are the items that come with the Bronze 1:
2 Bookshelf loudspeakers 2 Grilles 2 Foam port plugs Hex-key Owner's Manual Important Safety Instructions
Max Input Power |
150 watts
vs
70 watts
|
Handle more power from your amplifier |
Woofer Size |
6.5 inches
vs
5.5 inches
|
Larger woofer |
Low Frequency Response |
54 Hz
vs
55 Hz
|
Generates deeper bass |
High Frequency Response |
44k Hz
vs
30k Hz
|
Generates higher frequency |
Sensitivity |
88 dB
vs
86 dB
|
Play louder with same amount of amplification power |
Height |
260mm
vs
388mm
|
Easier to fit in smaller spaces |
Base Surface Area |
338cm2 (165x205mm)
vs
555cm2 (212x262mm)
|
Takes less floor space |
General |
Revel PerformaBe M126Be |
Monitor Audio Bronze 1 |
Brand |
Revel |
Monitor Audio |
Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
Power Range |
50-150 watts |
20-70 watts |
Sensitivity |
86 dB |
88 dB |
Impedance |
8 ohms |
8 ohms |
Frequency Response |
54-44k Hz |
55-30k Hz |
Drivers |
|
|
Woofer Quantity |
1 |
1 |
Woofer Size |
6.5" |
5.5" |
Woofer Composition |
DCC Aluminum |
C-CAM |
Woofer Surround Material |
Rubber |
Rubber |
Tweeter Size |
1" |
1" |
Tweeter Type |
Hard-Dome |
Dome |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
No |
Crossover Frequency |
n/a |
2700Hz |
Firing Direction |
rear |
rear |
Physical Specs |
|
|
Height |
388.0mm (15.3") |
260.0mm (10.2") |
Width |
212.0mm (8.3") |
165.0mm (6.5") |
Depth |
262.0mm (10.3") |
205.0mm (8.1") |
Weight |
10.00kg (22lbs) |
3.50kg (7.7lbs) |
Enclosure |
Bass reflex |
Bass Reflex |
Finish |
Wood/Lacquer |
MDF/Wood-grain vinyl |
Available Colors |
Walnut,Black,White,Silver |
Walnut, White, Rosemah, Black |
Mounting Bracket |
No |
No |
Recommended Stand Height |
22-26" |
30-31" |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
No |
No |
Other |
|
|
Parts Warranty |
5 Years |
5 Years |
Labor Warranty |
5 Years |
5 Years |