SpeakerDecision
  • SPEAKERS by TYPE
    • Passive Bookshelf Speakers
    • Passive Floor-standing Speakers
    • Passive Center Channel Speakers
    • Passive In-wall Speakers
    • All Passive Speakers
    • Powered Subwoofers
    • Powered Stereo Speakers
  • AMPLIFIERS
  • SMART FIND

Revel M126Be vs KEF Q150 Comparison

x
Speaker to replace
Change

Revel M126Be

Passive Bookshelf | 54-44k Hz

Revel PerformaBe M126Be
CHECK PRICE
Change
    
KEF Q150

Passive Bookshelf | 51-28k Hz

KEF Q150
CHECK PRICE
Revel M126Be Revel M126Be
See at AMAZON
KEF Q150 KEF Q150
See at AMAZON
Revel M126Be
See at AMAZON
KEF Q150
See at AMAZON
Revel M126Be vs KEF Q150 Speaker Comparison

In this review, we will be comparing M126Be and Q150, two Passive Bookshelf speakers from Revel and KEF.

Let's have a brief look at the main features of Revel M126Be and KEF Q150 first before getting into our more detailed comparison.

Revel M126Be Key Specs

  • 2-way Design
  • 1" Hard-Dome Tweeter
  • 6.5" DCC Aluminum Woofer
  • 54-44k Hz Frequency Response
  • 86 dB Sensitivity
  • Impedance: 8ohms
  • Power Range:50-150watts
  • Weight:10.00kg
  • Dimensions (H x W x D): 388.0" x 8-5/16" x 10-5/16"( 388.0 x 212.0 x 262.0mm )

KEF Q150 Key Specs

  • 2-way Design
  • 11th Generation Uni-Q Driver
  • 1" Dome Tweeter
  • 5.25" Aluminum Woofer
  • 51-28k Hz Frequency Response
  • 86 dB Sensitivity
  • Impedance: 8ohms
  • Power Range:10-100watts
  • Weight:5.60kg
  • Dimensions (H x W x D): 303.0" x 7.0" x 10.9"( 303.0 x 180.0 x 278.0mm )

What size room are the Revel M126Be and KEF Q150 speakers good for?

The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:

Listening Environment* Revel M126Be KEF Q150
Near-field Poor Average
Small Room Average Good
Mid-size Room Good Average
Large Room Average Poor
Very Large Room Poor Bad

(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2. Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)

In the following sections, we will get into more detail in order to better understand how the Revel M126Be and KEF Q150 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.


**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.


Drivers

Both M126Be and Q150 are 2-way speakers.

Driver Revel M126Be KEF Q150
Driver Setup 2-way 2-way
Tweeter 1-inch 1-inch
Midrange - -
Woofer 1 x 6.5-inch 1 x 5.25-inch

M126Be features a 1" beryllium Hard-Dome Tweeter and 1 x 6.5" DCC Aluminum Woofer . On the other hand, the Q150 features a 1" vented aluminum Dome Tweeter and 1 x 5.25" Aluminum Woofer with a Crossover frequency at 2500Hz.

Frequency Response

M126Be has a frequency range of 54-44k Hz whereas Q150 has a frequency range of 51-28k Hz. With a minimum frequency of 51Hz, the Q150 can go slightly deeper then the M126Be's min frequency of 54Hz.

Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.

Low Frequency

Bookshelf Speakers

M126Be
Q150
Min
Average
Max
High Frequency

Bookshelf Speakers

Revel M126Be
KEF Q150
Min
Average
Max

None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.

Impedance and Sensitivity

M126Be and Q150 have the same Impedance of 8 ohms and their sensitivity is also same at 86 dB.

Sensitivity

Bookshelf Speakers

M126Be
Q150
Min
Average
Max

Power Range

Power range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.

M126Be can handle a max power of 150 watts RMS from the amp the whereas Q150 has a max power handling value of 100 watts RMS, 50 watts less than the M126Be.

Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters such as Impedance, sensitivity and system efficiencies.

Input Type and Bi-Amping / Bi-Wiring

M126Be features Post type posts and Q150 has a Post type posts. None of these speakers feature bi-amping/bi-wiring.

KEF Q150 Terminals
KEF Q150's Post terminals

Cabinet Type and Port Position

Both M126Be and Q150 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.

If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.

KEF Q150  Port
KEF Q150 Port

Physical Specs

Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Revel M126Be's and KEF Q150's external dimensions. Revel M126Be has external dimensions of 388.0 x 212.0 x 262.0mm ( 15-1/4 x 8-5/16 x 10-5/16inch) whereas KEF Q150 has external dimensions of 303.0 x 180.0 x 278.0mm ( 11.9 x 7.0 x 10.9inch) .

KEF Q150 is 32mm narrower and 85mm shorter than Revel M126Be but it is also 16mm deeper.

Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited. The base surface area of the Revel M126Be is approximately 555.4cm2 / 86.1inch2 and base area of the KEF Q150 is approximately 500.4cm2 / 77.6inch2. The M126Be requires 11% more surface area than the Q150 which gives it a small disadvantage on placement in tight spaces.

Weight Comparison

The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Revel M126Be weighs 10.00kg / 22lbs and the KEF Q150 weighs 5.60kg / 12.3lbs. This makes the M126Be 79% heavier than the Q150.

Here is a comparison of how M126Be and Q150's weights compare with the average, max and min weights in Passive Bookshelf class.

Weight
All Bookshelf Speakers
Revel M126Be
KEF Q150
Min
Average
Max

What's in the Box of Revel M126Be?

Here are the items that are included inside the box of M126Be:
  • Bookshelf loudspeaker
  • Grille
  • Foam port plug
  • Owners Manual
  • What's in the Box of KEF Q150?

    Here are the items that come with the Q150:
  • 2 Bookshelf loudspeakers
  • 2 Foam port plugs
  • 8 Self-adhesive rubber feet
  • Owner's Manual
  • Warranty Registration Card

  • Reasons to choose Revel PerformaBe M126Be over KEF Q150
    Max Input Power 150 watts vs 100 watts Handle more power from your amplifier
    Woofer Size 6.5 inches vs 5.25 inches Larger woofer
    High Frequency Response 44k Hz vs 28k Hz Generates higher frequency

    Reasons to choose KEF Q150 over Revel PerformaBe M126Be

    Low Frequency Response 51 Hz vs 54 Hz Generates deeper bass
    Height 303mm vs 388mm Easier to fit in smaller spaces
    Base Surface Area 500cm2 vs 555cm2 Takes less floor space
    Price per pair* 600USD vs 4400USD costs less (*prices may change depending on the seller, location and time)
    Revel M126Be vs KEF Q150 Specs Table
    Detailed comparison of specifications
    General Revel PerformaBe M126Be KEF Q150
    Brand Revel KEF
    Speaker Type Bookshelf speakers Bookshelf speakers
    Power Range 50-150 watts 10-100 watts
    Sensitivity 86 dB 86 dB
    Impedance 8 ohms 8 ohms
    Impedance n/a 3.7 ohms
    Frequency Response 54-44k Hz 51-28k Hz
    Drivers
    Woofer Quantity 1 1
    Woofer Size 6.5" 5.25"
    Woofer Composition DCC Aluminum Aluminum
    Woofer Surround Material Rubber Rubber
    Tweeter Size 1" 1"
    Tweeter Type Hard-Dome Dome
    Aimable Tweeter No No
    Midrange Driver No No
    Crossover Frequency n/a 2500Hz
    Firing Direction rear rear
    Physical Specs
    Height 388.0mm (15.3") 303.0mm (11.9")
    Width 212.0mm (8.3") 180.0mm (7.1")
    Depth 262.0mm (10.3") 278.0mm (10.9")
    Weight 10.00kg (22lbs) 5.60kg (12.3lbs)
    Enclosure Bass reflex Bass Reflex
    Finish Wood/Lacquer MDF/Vinyl-wrapped
    Available Colors Walnut,Black,White,Silver Black, Walnut, White
    Mounting Bracket No No
    Recommended Stand Height 22-26" 18-24"
    Grille Yes Yes
    Moisture Resistancy No No
    Connections
    Biamp Inputs No No
    Other
    Parts Warranty 5 Years 5 Years
    Labor Warranty 5 Years 5 Years

    Most Popular Speakers
    Klipsch Reference R-51M
    Klipsch R-51M
    2-way | 93 dB | 8 ohms
    Wharfedale Elysian 2
    Wharfedale Elysian 2
    3-way | 89 dB | 4 ohms
    ELAC Debut 2.0 B6.2
    ELAC Debut 2.0 B6.2
    2-way | 87 dB | 6 ohms
    Bowers & Wilkins 606 S2 Anniversary Edition
    B&W 606 S2
    2-way | 88 dB | 8 ohms
    KEF Q150
    KEF Q150
    2-way | 86 dB | 8 ohms
    Klipsch Reference Premiere RP-500M
    Klipsch RP-500M
    2-way | 93 dB | 8 ohms
    Wharfedale EVO4.1
    Wharfedale EVO4.1
    2-way | 87 dB | 8 ohms
    Bowers & Wilkins 606
    B&W 606
    2-way | 88 dB | 8 ohms
    Copyright © 2025 by SpeakerDecision
    About Privacy Contact US Camera Decision

    Report a Correction