In this review, we will be comparing 3030i and S15, two Passive Bookshelf speakers from Q Acoustics and Polk Audio. Let's have a brief look at the main features
of Q Acoustics 3030i and Polk S15 first before getting into our more
detailed comparison.
What size room are the Q Acoustics 3030i and Polk S15 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Q Acoustics 3030i and Polk S15 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both 3030i and S15 are 2-way speakers.
Driver |
Q Acoustics 3030i |
Polk S15 |
Driver Setup
|
2-way
|
2-way
|
Tweeter
|
1-inch
|
1-inch
|
Midrange
|
- |
- |
Woofer
|
1 x 6.5-inch
|
1 x 5.25-inch
|
3030i features a 1" decoupled Tweeter and 1 x 6.5" Coated paper Woofer with a Crossover frequency at 2400Hz. On the other hand, the S15 features a 1" Terylene Dome Tweeter and 1 x 5.25" Mica-reinforced polypropylene Woofer with a Crossover frequency at 2500Hz.
Frequency Response
3030i has a frequency range of 46-30k Hz whereas S15 has a frequency range of 50-40k Hz. With a minimum frequency of 46Hz, the 3030i can go slightly deeper then the S15's min frequency of 50Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
3030i is a 6 ohms speaker compared to the S15 which has a nominal impedance of 8 ohms.
On the other hand, they have the same sensitivity of 88 dBdB.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
3030i can handle a max power of 100 watts RMS from the amp the whereas 3030i has a max power handling value of 75 watts RMS , 25 watts less than the S15.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
3030i features Pair of Binding Posts - Gold Plated type posts and S15 has a Pair of Binding Posts - Gold Plated type posts. None of these speakers feature bi-amping/bi-wiring.
Cabinet Type and Port Position
Both 3030i and S15 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Q Acoustics 3030i's and Polk S15's external dimensions. Q Acoustics 3030i has external dimensions of 325.0 x 200.0 x 329.0mm ( 12.7 x 7.8 x 12.9inch) whereas Polk S15 has external dimensions of 304.8 x 190.0 x 260.4mm ( 12.0 x 7.4 x 10.2inch) .
Q Acoustics 3030i is clearly the larger of the two speakers. Its body is 10mm wider, 20.2mm taller and 68.6mm deeper than Polk S15.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Q Acoustics 3030i is approximately 658.0cm2 / 102.0inch2 and base area of the Polk S15 is approximately 494.8cm2 / 76.7inch2. The 3030i requires 33% more surface area than the S15 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Q Acoustics 3030i weighs 6.20kg / 13.6lbs and the Polk S15 weighs 5.90kg / 13lbs. This makes the 3030i 5% heavier than the S15.
Here is a comparison of how 3030i and S15's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Q Acoustics 3030i?
Here are the items that are included inside the box of 3030i:
2 x 3030i bookshelf speakers 2 x Speaker Grilles 2 x Foam Bungs 1 x User Manual
What's in the Box of Polk S15?
Here are the items that come with the S15:
2 Bookshelf loudspeakers2 Grille (attached)8 Self-adhesive rubber feetWall-mount templateOwners ManualOnline Product Registration
Woofer Size |
6.5 inches
vs
5.25 inches
|
Larger woofer |
Low Frequency Response |
46 Hz
vs
50 Hz
|
Generates deeper bass |
Max Input Power |
100 watts
vs
75 watts
|
Handle more power from your amplifier |
Nominal Impedance |
8 ohms
vs
6 ohms
|
Less selective with amplifiers |
High Frequency Response |
40k Hz
vs
30k Hz
|
Generates higher frequency |
Mounting Bracket |
Yes
vs
No
|
Allows mounting on walls |
Height |
304mm
vs
325mm
|
Easier to fit in smaller spaces |
Base Surface Area |
494cm2 (190x260mm)
vs
658cm2 (200x329mm)
|
Takes less floor space |
Price per pair* |
259USD
vs
499USD
|
costs less (*prices may change depending on the seller, location and time) |
General |
Q Acoustics 3030i |
Polk Audio Signature S15 |
Brand |
Q Acoustics |
Polk Audio |
Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
Power Range |
25-75 watts |
20-100 watts |
Sensitivity |
88 dB |
88 dB |
Impedance |
6 ohms |
8 ohms |
Impedance |
4 ohms |
n/a |
Frequency Response |
46-30k Hz |
50-40k Hz |
Drivers |
|
|
Woofer Quantity |
1 |
1 |
Woofer Size |
6.5" |
5.25" |
Woofer Composition |
Coated paper |
Mica-reinforced polypropylene |
Woofer Surround Material |
Rubber |
Butyl rubber |
Tweeter Size |
1" |
1" |
Tweeter Type |
decoupled |
Dome |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
No |
Crossover Frequency |
2400Hz |
2500Hz |
Firing Direction |
rear |
rear |
Physical Specs |
|
|
Height |
325.0mm (12.8") |
304.8mm (12") |
Width |
200.0mm (7.9") |
190.0mm (7.5") |
Depth |
329.0mm (13") |
260.4mm (10.3") |
Weight |
6.20kg (13.6lbs) |
5.90kg (13lbs) |
Enclosure |
Bass Reflex |
Bass Reflex |
Finish |
n/a |
Meddite MDF |
Available Colors |
Walnut, Black, White |
Black, Walnut, Brown Walnut |
Mounting Bracket |
No |
Keyhole |
Recommended Stand Height |
n/a |
24-30" |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
No |
No |
Other |
|
|
Parts Warranty |
4 Years |
5 Years |
Labor Warranty |
4 Years |
5 Years |