In this review, we will be comparing two different type of speakers by Polk Audio. Polk Audio Signature S60 is a Floor-standing speaker whereas the S15 is a Bookshelf speaker.
Let's have a brief look at the main features
of Polk S60 and Polk S15 first before getting into our more
detailed comparison.
S60 and S15 are members of Polk Audio's Signature S series of speakers. Below you can find the loudspeakers from this series.
What size room are the Polk S60 and Polk S15 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Polk S60 and Polk S15 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both S60 and S15 are 2-way speakers.
| Driver |
Polk S60 |
Polk S15 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
3 x 6.5-inch
|
1 x 5.25-inch
|
S60 features a 1" Terylene Dome Tweeter and 3 x 6.5" Mica-reinforced polypropylene Woofer with a Crossover frequency at 2500Hz. On the other hand, the S15 features a 1" Terylene Dome Tweeter and 1 x 5.25" Mica-reinforced polypropylene Woofer with a Crossover frequency at 2500Hz.
Frequency Response
S60 has a frequency range of 26-40k Hz whereas S15 has a frequency range of 50-40k Hz. With a minimum frequency of 26Hz, the S60 can go significantly deeper on the low side and provide stronger bass compared to the S15's min frequency of 50Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
S60 and S15 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. S60 sensitivity is rated at 90 dB and the S15's is at 88 dB. This 2 dB difference makes the Polk S60 a more sensitive speaker compared to Polk S15, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
S60 can handle a max power of 300 watts RMS from the amp the whereas S15 has a max power handling value of 100 watts RMS, 200 watts less than the S60.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
S60 features 5-way post posts which make bi-amping or bi-wiring possible. S15 has a Pair of Binding Posts - Gold Plated which doesn't feature bi-amping/bi-wiring.
Polk S60's 5-way post terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
S60 has a bottom firing port whereas S15 has a rear firing ports. Polk S60's bottom-firing port gives more flexibility in placement in regards to proximity to walls compared to Polk S15 with its rear-firing port.
Polk S60 Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Polk S60's and Polk S15's external dimensions. Polk S60 has external dimensions of 1131.0 x 299.0 x 401.0mm ( 44-1/2 x 11-3/4 x 15-3/4inch) whereas Polk S15 has external dimensions of 304.8 x 190.0 x 260.4mm ( 12.0 x 7.4 x 10.2inch) .
Polk S60 is clearly the larger of the two speakers. Its body is 109mm wider, 826.2mm taller and 140.6mm deeper than Polk S15.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Polk S60 is approximately 1199.0cm2 / 185.8inch2 and base area of the Polk S15 is approximately 494.8cm2 / 76.7inch2. The S60 requires 142% more surface area than the S15 which gives it a small disadvantage on placement in tight spaces.
What's in the Box of Polk S60?
Here are the items that are included inside the box of S60:
Floorstanding loudspeakerGrille (attached)4 Feet (pre-installed)Owners ManualOnline Product Registration
What's in the Box of Polk S15?
Here are the items that come with the S15:
2 Bookshelf loudspeakers2 Grille (attached)8 Self-adhesive rubber feetWall-mount templateOwners ManualOnline Product Registration